Web Forms :: Dynamically Created Table Will Not Appear After Postback?
Jun 7, 2010
In my code I create a table dynamically and I try to restore the table after a postback. But although I recreate the table during the Page_Load event with the same id's before,the table doesn't appear with the same state and values as before.
I think it will be a typically beginner error, but I wasn't be able to locate the error whereas reading different posts and tutorials related to this topic.
//Code behind
protected void Page_Load(object sender, EventArgs e)
{
if (Page.IsPostBack & _hfsubmittedURL.Value == "tbCreated")
{
TableRow row1 = new TableRow();
[Code].....
View 6 Replies
Similar Messages:
Mar 9, 2011
Im creating a table dynamically in my codebehind to display some statistics. The table is in a usercontrol. When the page first loads, its created and displayed correctly. If I do something that generates a postback, the table subsequently disappears, this is because its created inside a !IsPostback. How can i ensure that the table, once its been generated, stays visble on the page ? I dont want to generate it each time the page loads as it involves a lot of calculations on the database which will slow the pageload down.
View 4 Replies
Nov 8, 2010
I know this has been asked before, but I feel like I'm losing my way trying to follow the other examples out there. Does anyone see a straightforward solution to my particular problem?
Goal:
Two column Master Page
Left column contains a list of [stuff] (I'm trying a Repeater with LinkButtons)
Right column contains a TabContainer which will add dynamically created tabs when buttons on the left are clicked.
Left side looks like this:
<asp:Repeater
<ItemTemplate>
<asp:LinkButton ID="lbShowReport" runat="server" Text='<%# Eval("Title") %>' CommandName="Select">
</asp:LinkButton>
<asp:HiddenField ID="hfReportID" runat="server" Value='<%# Eval("Id") %>' />
</ItemTemplate>
</asp:Repeater>
I had initially been creating tabs in the LB's OnCommand event, but of course this means that any tab generated by one click is lost if the user clicks another LinkButton.
So I moved the code to create a new tab to the OnInit section of the page and attempted to loop through the RepeaterItems comparing the UniqueId of each LinkButton until I found the one that was clicked using Request.Form["__EVENTTARGET"].
When I tried to loop through the RepeaterItems, however, the count was always 0, and the Repeater would not populate.
So now I am rebinding the Repeater in the Init section on every post-back - this allows me to find the LinkButton that was clicked. I then add the new Tab based on the LB that was clicked like this:
[Code]....
This properly adds new Tabs to the TabContainer using this code:
[Code]....
but I still have the issue where I can only ever have one dynamically created tab in the TabContainer at a time. All of the code above is being executed in OnInit, which I thought would save the tabs during post-backs, but instead this is behaving as tho I was adding the tabs in the OnCommand event of the Link Button...
View 3 Replies
Jan 13, 2011
I have a couple of RadioButtons that are created dynamically. But after postback they don't retain their checked property. I also have some CheckBoxes and they work just fine using the same mechanism (code below). I have narrowed down the problem to the "GroupName" property. If I remove it, it works just fine. But I need the RadioButtons to be mutually exclusive.
[Code]....
View 3 Replies
Aug 13, 2010
I created a templatefield programmatically and it works fine but whenever I clicked the button inside the gridview and do the postback my templatefield are gone.
View 3 Replies
Mar 3, 2010
In design time I created a Gridview and a delete button in a page test.aspx:
[Code]....
The program stopped at statement "if ((row.Cells[COL_INDEX_SELECTED].Controls[0] as CheckBox).Checked)",
because it cannot find the checkbox created before.
I tried to shift all the code in Page_Load to Page_Init, but the ticked checkboxes are still lost.
I could find the ticked checkboxes names in its request object parameters(this.Request.Params.AllKey) if I setup a breakpoint on the error statement.
Does anyone konw what's happening and how to retrieve the selected rows?
View 6 Replies
Oct 19, 2010
I am unable to reterive dynamically created table cells back color which has been changed by the click event of the cell.I am adding table cells dynamically on asp.net page and also setting cells back color. So when the page is loaded, table has number of cells with different colors.Table cells back color can be changed by clicking on it through java script. On page post back event, i am jutst getting those colors which were set before the click event.For example:When the page is loaded, cell1= red and cell2=red.If i click on cell2 then it will change to blue so now cell1= red and cell2 = bluebut on post back i am getting cell1= red and cell2 = red.Table is recreated on post back event.
View 3 Replies
May 27, 2010
I need to access the controls dynamically created template fields at run time in datagrid in post back event. Is there any way to retrieve the values in post back event? Or else give the ideas to acheive my requirement. I need to create no of rows and columns as text box as per user input. After fill the values to text box , i need to access the values in submit button.
View 1 Replies
May 10, 2010
I have a grid view that is dynamically created.In which every cell in the girdview has a 2 textbox (cTxtboxQty,ctxtWorkOrder) and 2 label.
When user click on the cell, a pop up come out and user are able to change the text inside the cell and click save.After that the pop up close and changed data immediately reflected on the screen.
My problem is:
After my data are changed and updated to database on the pop up page and having it post back to the parent page , my dynamically created textbox in gridview retain old value even new value has been assigned to it.
This sound very weird but i have no idea how to solve this.
My client side code is as below :
[Code]....
[Code]....
[Code]....
[Code]....
I have tested many times and find out that it might be the page hold the old value in memory, so that even we have updated the textbox value, after postback, it still keep and show the old value?
View 1 Replies
Nov 18, 2010
I know this question has been asked thousands of times, and I've struggled with it before, but for some reason, I can't accomplish what I want to accomplish... I have a dynamically added LinkButton that when clicked will dynamically add a control (in this example, a textbox) to the same panel. The intent is to continuously add on as many controls as times the LinkButton was clicked (i.e. I click it once, one box, then another click will give me 2 boxes, another click adds a 3rd). In the code below, I use the current date and time serialized to create a unique ID for each textbox control.
When I execute the code, clicking "Add Filter" will generate a new textbox, but once clicked again will create a new one, and dispose of the one before it. Instead, I want to persist the previous textbox as well as any data submitted within it.In the aspx:
<asp:Panel ID="pnlFilter" runat="server">
</asp:Panel>
In the aspx.cs:
protected void Page_Init(object sender, EventArgs e)
{
LinkButton lb = new LinkButton(); [code]....
View 4 Replies
Mar 10, 2011
I have a table thats created dynamically, the table gets its contents from a custom class I've created that gets statistical data from a database. As the table is generated dynamically, I've put the contents class (the table data) into a session object and I populate the table initially inside a !IsPostback then on the page init I get the data from the session (its empty on the firts page load). I am now getting this error: Multiple controls with the same ID 'controlnamehere' were found. FindControl requires that controls have unique IDs. How can I avoid this?
View 4 Replies
Jan 10, 2011
i am working on Accounting software.in this software i am to implement voucher entries form.In this form on page load a table (two rows and four columns) should be created after that one row should be appended to that table dynamically on button click event.
View 3 Replies
Feb 17, 2011
i want to bind text box that is located in dynamically created table.
[Code].....
View 1 Replies
Jun 3, 2010
I'm passing a List to an MVC view and generating checkboxes for each object in the list (The checkboxes are named t.Name).I'd like to be able to tell which checkboxes were checked once the form is posted. However, I'd like to avoid using the FormCollection object.
View 1 Replies
Jun 11, 2010
My problem is:
I've got a table, dynamically created, fill with a lot of dropdownlists witches IDs are dynamically created.
When a button is pressed, I need to scan all controls in the table and save their value.
But after the postback I can't no longer access to the table.
View 2 Replies
Sep 20, 2010
I have a script which creates a dynamic textbox (and more) in an AJAX async post back. But when I try to acess the textbox I am told "Object reference not set to an instance of an object". I have been strugleing with this for a long time. This is written in C# .Net 4. The line causing the problem is the very last one where I have tbGameName.Text.Trim()
[Code]....
View 2 Replies
Jun 15, 2010
I add HTML and tags to Page dynamically. But after every postbost, all values are empty. What can I do for Solve?
View 2 Replies
Aug 25, 2010
I dynamically create gridview, and in this grid I have template field also
field.HeaderTemplate = New GridViewTemplate(ListItemType.Header, col.ColumnName)
field.ItemTemplate = New GridViewTemplate(ListItemType.Item, col.ColumnName)
grdEmpty.Columns.Add(bfield)
but when enter some value in text box in this template field i lose value on postback. And also on postback I lose all template field and i must re-create this grid.
My goal is: I have button and i want to add new row in this grid, but i want to have old value also.
View 1 Replies
Mar 25, 2010
i have created Array of Linkbutton and when user click on link button it will create an array of Radio Buttons but it requires Postback all time so page load takes more time...
View 2 Replies
Oct 7, 2010
So I have two UpdatePanels. I am dynamically creating server-side buttons in UpdatePanel2. When the buttons come out, they are not hooked to the asynchronoustriggers of updatePanel1.
So how can I dynamically add these triggers of these newly dynamically created buttons so that clicking these buttons will only cause a partial postback to UpdatePanel1 ? Right now, when I click these buttons, it causes a partial-postback refresh to UpdatePanel2 (the panel itself that which the controls reside in)
View 4 Replies
Dec 16, 2010
I have an html table with rows and cells. And I have dynamically created a label and would like to assign the label to one of the cells of the table. What I am doing is I have a JavaScript which executes a code behind method and it would not accept an already created asp.net label. So I have created the asp.net label programmatically but cant assign it to the table to display the text value of the label. Below is the code:
[System.Web.Services.WebMethod] public static void EndCandiateTest(){
try { totalTestMarks = ts.RetrieveResults();
grade = tsp.RawScoreAndGrade(totalTestMarks);
remarks = tsp.ScoreInterpretation(totalTestMarks);
testResults = "Raw Score: " + totalTestMarks.ToString() + "
Grade: " + grade + " Remarks: " + remarks;
ts.ShowResults(testResults);
} catch (Exception e) {
} }
protected void ShowResults (string results). I want to display this label in an already existing html table.
messageLabel.Text = results;
View 3 Replies
Feb 2, 2010
I have a small form with some static elements that I am able to access with javascript the bring up a popup. 4 textboxes are generated and attached to a updatepanel. I've been trying various methods of validating the contols without generating postback.
I found anytime i registered a javascript to the scriptmanager the page must refresh.
Is there anyway it can be done?
View 1 Replies
Jan 6, 2011
i wrote a function to create dynamic table in code behind on selectedindexchanged of checkbox,that is when user will check 2 checkboxex 2 tables will be generated with textboxes,Then on button click i want insert values of these textboxes in database,for that i want to find textbox using findcontrol,but i could not find it,
So i called same function of table creation on page load,but then it shows error that textbox is having duplicate id
View 2 Replies
Jan 24, 2011
I am coding online sales a website but I've a problem on main page I have to show products I made it as 4 columns table but there is over than 100 product and i need paging for that. How can I fix it like 20 products per page.
View 2 Replies
Jun 22, 2010
I created dynamically a table with 3 rows not by using table tag. I need to find these rows in scripting, in button click, if any of these rows is empty then need to generate an alert message like enter current row.
View 1 Replies
