Web Forms :: How To Find A Custom Validators On Checkbox List
Jun 17, 2010
I would like to find a way of running custom validation on a checkbox list. The reason why is because they were a radiobutton list. Then our client decided they wanted to be able to uncheck them (without a clear button) so in the end I had to change them to checkbox lists and make them mutually exclusive. On some of them, one must be selected and I downloaded this: [URL] to set them as required - worked nicely. Perhaps there's a way of building on this further to create some sort of custom checkbox validation. why I need this custom validation is because when the built form checkbox list = flat or maisonette then floor level is then required.
I am new to ASP.NET and i have created a page where i am calling Fullname of person in Checkboxlist. When a user selects some names and clicks sendmail button , it should go into sql find out the email addresses of selected names and convert them to a mailto:aaa@ymail.com;abc@gmail.com; ask the user whichever mailaccount the user wants to use to send the mail to them.
I have one gridview with two template fields check box and dropdown and my doubt is dropdown validation should occur only for check box selected items..
In my form all the dropdown shows validation even though if check box is not selected
I'm attempting to create a custom control that extends the Table class. Inside of the table will be rendered a number of different controls based on a specified identifying property. On some of these controls, however, I need to specify validation for data types and requirement. To me, the most logical way of doing so is to add validators to the table and set their appropriate properties to specify which controls to validate. In doing so, however, I've discovered that none of the validators added will even render on the page in which the control is added. So is this a valid construct?
I am using two custom validator to validate EMAIL (should not be reused) & a captca image (text).Everything is working fine except that the displayed are not dynamic even though I set the displaystatus as DYNAMIC.
Test:
1. Enter email already registered
2. Enter invalid captcha text
both displays error. fine for now. but again.
1. Enter email NOT registered
2. Enter invalid captcha text
the error message at the email is still displayed as 'the email is arlready registered'. How can I remove the message for the email?
I am absoluetly confused. My web app has a checkbox list that my code is looking to see if the user checked it. Like I said, very simple stuff... Here's the code:
If (chkLaunch.Items(1).Selected) Then Launch = 1 End If
The odd thing is that when it gets to this bit of code it just moves right past it like it wasn't checked. The same thing happens when I use a single checkbox (rather than a checkbox list). I've tried a bunch of different ways to make the code work but I'm left to the conclusion that I'm just not telling it to do this correctly. Either that or my project is messed up somehow.I say that my project is messed up because when I add an object to the page in Design mode, it doesn't write the source code. So when I save and close, all the modifications are mysteriously gone. This happens on multiple PC's...So, is the checkbox problem just me not doing something correctly or is my web project messed up?
All ASP.Net client validation messages can be shown as an alert by setting the ShowMessageBox="True" property on the ValidationSummary control. This works fine for anything that happens on the client.
For the custom validators that validate server-side I had assumed that what would happen is that when the page is returned to the browser, ASP.Net would inject some javascript to show the alert box. However this isnt the case.
If you had relied on the message box to show detail and just have a * next to the erroneous field (as per my clients req's) then it wont work as intended. Does anyone have a solution for doing this? What I want is a way to possibly override the ValidationSummary control to inject javascript onto the page or something like this.
Wanting to create custom data annotation validation. Are there any useful guides / samples on how to create them?
Firstly: StringLength with minimum and maximum length. I'm aware .NET 4 can do this, but want to do the same in .NET 3.5, if possible being able to define minimum length only (at least x chars), maximum length only (up to x chars), or both (between x and y chars).
Secondly: Validation using modulus arithmetic - if the number is a valid length, I wish to validate using the Modulus 11 algorithm (I have already implemented it in JavaScript, so I guess it would just be a simple porting?)
Update: Solved second problem, was just a case of copying over the JavaScript implementation and making a few tweaks, so don't need a solution for that.
I'm working on a page that has a significant number of textboxes/dropdowns/etc to fill out. The majority of these are going to be performing some sort of custom validation. I should note that it's nothing of substantial size - all just string or integer values.
I always hear (and have typically always agreed) that as much validation should be performed on the client rather than on the server, but in this case I am unsure. The difference here is that this project will be passed on to an IT guy who knows about computers but is still new to programming - he will be the one in charge of making the minor updates and changes to the way these custom validations work in the future.
My idea shifted from being as efficient as possible to being a bit less efficient but much more readable. I created a new class specifically for all of my validations which will be used throughout the website. By forcing all of my custom validation code in this class, though, I eliminate any client-side validations I might be able to perform. I should also note that each page that requires a custom validation will generally need to perform at least one server-side validation, so I will never be able to use client-side 100%
Considering the relatively low level of activity on the website (currently and in the future), would you consider this as an acceptable solution? Or would you ALWAYS prefer to have as much validation on the client as possible in order to increase the responsiveness, even if it makes things a bit more messy for whoever may be working on it in the future?
I'm attempting to create a custom control that extends the Table class. Inside of the table will be rendered a number of different controls based on a specified identifying property. On some of these controls, however, I need to specify validation for data types and requirement.To me, the most logical way of doing so is to add validators to the table and set their appropriate properties to specify which controls to validate. In doing so, however, I've discovered that none of the validators added will even render on the page in which the control is added. So is this a valid construct?Here's an example of what I mean:
I am trying to create strogly typed datasets for my project. When I right click on the xsd file that I need to generate a strongly typed dataset for I can't find the 'Advanced' properties as described in the below article (almost half way down)[URL]As I do not see the Advanced properties option I can't find the 'Custom Tool' property/option to set its value to 'MSDatasetGenerator'. Do I have to install some kind of patch on my VS 2005?
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public class TngCheckBox : CompositeControl {
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public class TngCheckBox : CompositeControl {
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
I got few check box (depend on settings) that created during run time, some time the number of check box is 3, sometime is 5. And the check box ID also change based on the settings.
How can I search for ALL these check box and return its ID? I do not want to use javascript.
How can i generate dropdown lists based on what has been selected in the checckbox list. Below is an example of what i need. if the user selects the options day, lotID and waferID, then 3 cascading dropdown lists should be displayed. And then a gridview displays data based on what has been chosen in the dropdown lists.
Day LotID SlotID WaferID VendorID ToolID LocationDetected ProcessStep Stage Precipe WaferStartMaterial WaferStartVendor WaferStartLot WaferDiameterCOA WaferMapTitle BreakPoint BreakpointSide BreakpointMeasurement
I have a page where I am using 2 update panels. The first update panel contains a form that has some validation tied to it. The second on has a simple form, but no validation. When I go to use the form in the second panel, the postback is halted by the validators in the first panel. Everything works as it should when I remove the validators.
i would like to uncheck a checkbox in my gridview when the user clicks on that row... how do i do that in vb.
also, when trying out my website, when i do uncheck the checkboxs and click on the link to go back to the home page, the gridview on that page which links to the same table does not update the checkboxes with the new values.
I have a calendar control that has a checkbox control added to each cell on dayrender. A user will check the dates that they want to add an event for and click a button that will display the modaldialog box where the user will enter the event for the selected dates. I'm having trouble looping through the calendar dates to get the checkbox contol's checked property.
