I have many reports built in BIDS or report builder 2.0. I have uploaded all reports in the reporting server. I want to integrate alkl reports into one report. I wanted to use subreport option. But i am not able to browse to find other reports. It says that the subreports for a report must to uploaded to the server. But i have already uploaded all reports to server. What to do?
View 1 RepliesIs it possible to show 3 "Crystal Report" in single "Report Viewer Control" page??My current code for 1 Crystal Report and 1 Report Viewer control Page is below:Below code Page name is "JpsCrystalReport.aspx"
using CrystalDecisions.CrystalReports.Engine; //for crystal report
using CrystalDecisions.ReportSource;
protected void Page_Load(object sender, EventArgs e)
{
SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["SQLConnectionString"].ConnectionString);
[code]...
I want that when i click on button it redirects to "JpsCrystalReport.aspx" page as per condition given. Then on "JpsCrystalReport.aspx" page it should execute the 3 crystal reports as per conditions given on button click.Or I had to create 3 different "JpsCrystalReport.aspx" pages (that contains Report Viewer control) to show 3 Different Crystal Reports as per condition on button click?
using crystal report in VS 2005 C#. I want to print multiple copies(3) of a same report in a single page. Is is possible.
View 1 RepliesIn my project I have to create crystal report which includes subreport ,
the data of subreport must be linked with the field of the main report...
Language is C#.net
Web App.
We have to integrate an SSRS report in sharepoint.When we will click on the report it should open in a custom aspx page and not under Report viewer.
View 1 RepliesWe have a requirement of using SSRS for rendering the reports using ReportViewer control. We are aware of the fact that SSRS requires Windows Authentication, but my requirement is to provide access to all the users stored in a database table who provide valid credentials to access the SSRS report via web page and report viewer cotrol.
We are following the below steps.
1) Create a dummy windows level user say "dummy".
2) Provide "Browser" permissions to the "dummy" user.
3) Set Impersonation = true for the "dummy" user in the web.config file of the custom website that uses the ReportViewer control.
4) Follow all the required steps to configure the reportviewer control for accessign the SSRS report
After following all the above steps we are successfully able to access the SSRS report on the internet facing website without any Windows authentication popup.
P.S. We dont want to implement a Custom extension for implementing forms authentication.
I have been trying from the past two weeks to integrate crystal reports into my web application. The problem is "We created some reports using Crystal Reports 2008(Sp2) and we are trying to integrate those reports into webpage. Everything works fine on my local machine but when it is deployed to the production server i ran into a lot of problems..
Problem-1 : First time I load the report it comes to the screen where it prompts for DB credentials and stucks up there..I mean those are non editable and doesn't go to next screen. On my local machine the report even didn't prompt for DB credentials. Why it prompts when moved to prod'n Box? How to avoid that?
Problem-2: How about the images on parameters screen?
I am facing problem in MIGS(Mastercard Internet Gateway Service) 3rd party Integration in ASP.NET.
View 1 RepliesHave an asp application and getting: "Invalid Report File Path" when binding a DataSet.
[Code]....
Our heavily-used VS2005 application uses CR (10.2) for an MSWord-formatted stream to a webservice, and for printing from a CRViewer. We continue to get "Failed to open report" or "The maximum report processing jobs limit configured by your system administrator has been reached". Once the error starts, the only remedy is recycling the application pool, disconnecting current users.
I have used the proper ReportDocument Close() and Dispose(), and even GC.Collect(), in Page_Unload. I upped the Print Job Limit from 75 to 300. After recycling I delete temp files.
1) Is there any way to monitor the use of the CR resources, to see when they increase and get close to the limit?
2) Is there any way to free them without having to disconnect users?
I suspect users are simply closing their browser after printing from an open CR Viewer. It would still go through Page_Unload, right? So maybe I would benefit from closing and disposing the CR Viewer in Page_Unload as well as the click that returns them to the application.
I had assumed that to permit users to page through the report, the CR Viewer had to have ViewState enabled, and remain open through Page_Unload.
How to keep displaying report filters while displaying the report in CrystalReportViewer.I have a web part that which uses CrystalReportViewer to display the report data. I want to keep displaying the Report parameters (filters) as I rendered the report content.
View 1 RepliesI'm getting the "Load Report Failed" Error.
I have a web application designed using VS2008 & Crystal Reports for VS2008 (Ver. 10.5.3700). I'm using Framework 2.0 for deployment.
My development system is WinXp and my deployment system is Win2003 Server.
Here is what i have done -
1) Added a Crystal Report to my project "rptReport.rpt"
2) Added a Crystal Report Source (crSource) to my .aspx page.
3) Added Crystal Report Viewer to my page, with crSource as its Report Source.
This works fine when i run it on my development machine. But Gives a "Load Report Failed" error on my deployment machine.
This is what i have already tried doing on deployment server:
1) Giving IIS_WPG full control to temp folder.
2) Publishing with "Allow this precompiled site to be updatable." checked/unchecked.
After reserving a ticket for an travel agency, I want generate a printable report using Crystal Report. I'm looking for a way to do that. Any video tutorial or something like that?
View 1 RepliesAfter some internet sifting i found how to create a crystal report using the disconnected model and learnt how to pass parameters to it.
In my report am suplying a range of dates to select data inside the range; when the report only has one page (or the first of a multi paged) everything works like a charm. The problem is when i naviagate the report using the default toolbar buttons on the crystalreportviewer, the report asks for the very same parameters ive set in code behind.
I was using queystring parameters to pass the parameters (i have a page where you pick the report types and another which has the reportviewer and displays the reports previously selected)
and i thought that they got lost because when you click next/previous there is a postback...switched to session variables and it is still the same.
1: How can i solve this?
2: Is there a way to cache all the report so that navigation doesnt require database access?
3: How can i open the reports without any browser controls /toolbars?
//code from the page where the parameters are set
[Code]....
set the language of my report
View 3 RepliesI have a crystalreportviewer bound to a dinamically generated DataSet. The Datatable within that dataset has 2 rows of data, however only the first one is showing on my report.
Here's the code that binds my dataset to the report viewer:
[Code]....
i have developed a report using crystal report during design time. But is it possible to generate a report during run time .can any one tell me how to develope a report during run time for example a query
Select name, address, designation from emp where empno = '0001'
where 0001 is specified at run time and is there anyway to make the interface grid view like.
I am getting the result properly in crystal report.But after few loading,I get report Load failed...error msg.I am using Page_Init for crystal report Page navigation.I am stuck with this
View 2 RepliesI'm using Report.rdlc for report definition. The following instruction provides the sum of the values in the Cost text box for the page:
=Sum(ReportItems!Cost.Value)
But I want to get sum of the values in the Cost text box for pages from first page to the last page that we are at now. For example page1 has sum of 80 and page2 has sum of 70, Now I want to get 150 in the second page(ie, Page2).
I am looking for the directions on how to set a report to printcontinuously, without a paper feed. I have set one up using the LabelWizard, but how do I set it up in an existing report? I have lookedthrough all the property settings and cannot find any reference to it.
View 5 RepliesI just want to place static text on my report. From the toolbox I placed an unbound field type string on my report but I can not set the text or value somewhere?
View 1 RepliesI am new to asp. I need to generate a report of a registration form in a new page. how to create a report in a blank page and download that page as a word or pdf document..
View 1 RepliesI have problem when i create a crystal report. follow the requirement from customer, i need to show a report that list all data of 3 tables that it does not have any relationship between them in only one Report. It will show:
Table A:
-- column A.1 | col A.2 | col A.3
Table B:
-- col B.1 | col B.2 | col B.3 | col B.4
Table C:
-- col C.1 | col C.2
So, how do i need to do to show the report same as above?
how to create a report in C# Form and able to save the report to pdf file or word ?
View 1 RepliesIs there is any way to show report server web service to show reports in web pages.
View 1 Replies