I am having a dropdown list in the aspx page as
<asp:DropDownList ID="ddlItems" runat="server"></asp:DropDownList>
but when i refer the ddlItems in page_load i am getting "Error 1 The name 'ddlItems' does not exist in the current context.
I have a PHP website and I am looking to convert it into ASP.NET. So I am learning ASP.NET and I needed a way to upload multiple files to the server. So I ran across this tutorial: [URL] I did everything correct, but I get this error:
Compiler Error Message: CS0103: The name 'Path' does not exist in the current context
Source Error:
[Code]....
Source File: c:UsersUser1DesktopUweaveLigues Hockey SimulesViewsAdminFormIndex.aspx
Line: 18
im getting this error CS0103: The name 'ProjectName does not exist in the current context, im getting this error on Global.asax. i tried to clean and rebuild but its not working, please tell me how to resolve it?
View 3 Repliesmy application in vs2005 / 2.0 framework , right now i change it with VSD08 /3.5 framework according when i change it open it with 08 at first time it get ask me ( you want to convert the application framework 2.0 to 3.5 ) i said yes , after that i was trying to run the application it get works on that machine means on ( locahost) but not able to access that on netowork its shows an error:
The name 'xxx' does not exist in the current context ( if i try to run any function within app_code ) then it shows me shuch error i wan also rebuild my appliciton , but noting get happen shall i create a new project and then copy my old code?
I am working on a contact form. i am getting an error below, here is my code:
[Code]....
And here is the error i'm getting:
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS0103: The name 'txtEmail' does not exist in the current contextSource
Error:
[Code]....
Line 20: try
Line 21: {
Line 22: MailAddress fromAddress = new MailAddress(txtEmail.Text, txtFirstName.Text + " " + txtLastName.Text);
Line 23:
Line 24: // You can specify the host name or ipaddress of your server
Source File: c:HostingSpacesartofmouldingartofmoulding.comwwwrootcontact.aspx.cs
Line: 22
I have Called a Function " GetPhotos" from Designer Page (source). Getphotos() is in Code-behind Page. It runs well When i only Build the Application. But when i Publish the same application using "fixedName and single page Assemblies" option Enable, it Returns an Error
Compiler Error Message: CS0103: The name 'GetPhotos' does not exist in the current context.
what should i do? Code in Design page:
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:Panel ID="pn1" runat="server" GroupingText="Facility's">
<table width="100%">
<tr>
<td style="text-align: left">
<asp:Label ID="Label2" runat="server" Height="100%"
style="font-size: 21pt; font-weight: 700; color: #996633" Width="100%"></asp:Label>
</td>
</tr>
<tr><td style="text-align: left"><asp:Label ID="Label3" runat="server"
style="text-align: justify"></asp:Label></td></tr>
<tr>
<td>
<asp:GridView ID="GridView1" runat="server" AllowPaging="True"
BackColor="White" BorderColor="#336666" BorderStyle="Double" BorderWidth="3px"
CellPadding="4" PageSize="15" Width="100%"
onselectedindexchanged="GridView1_SelectedIndexChanged">
<RowStyle BackColor="White" ForeColor="#333333" />
<FooterStyle BackColor="White" ForeColor="#333333" />
<PagerStyle BackColor="#336666" ForeColor="White" HorizontalAlign="Center" />
<SelectedRowStyle BackColor="#339966" Font-Bold="True" ForeColor="White" />
<HeaderStyle BackColor="#336666" Font-Bold="True" ForeColor="White" />
</asp:GridView>
<%
GetPhotos(Label2.Text);
%>
</td>
</tr>
</table>
</asp:Panel>
</asp:Content>
i have a Class named Helper.cs inside my App_Code folder. And i get this error:
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0103: The name 'Helper' does not exist in the current context
Source Error:
[Code]....
And i know my compiler recognizes the Helper class because the 'Helper' is colored in cyan... means is known by the compiler. What am i doing wrong?
I have an ASPX Page:
<%@ Page Language="C#" MasterPageFile="~/site.Master" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="myProject.Presentation.Web.Default" src="Default.aspx.cs" %>
<%@ MasterType VirtualPath="~/site.Master" %>
...
<asp:Repeater ID="rGrid" runat="server">
<ItemTemplate>
...
</ItemTemplate>
</asp:Repeater>
With this Master:
<%@ Master Language="C#" AutoEventWireup="true" Codebehind="site.master.cs" Inherits="myProject.Presentation.Web.master" src="~/site.Master.cs" %>
When I try to access one of the members on the page:
namespace myProject.Presentation.Web {
public partial class Default : System.Web.UI.Page
...
rGrid.DataSource = myProject.Business.User.GetReports(UserId, true);
Iget this YSOD on that line:
CS0103: The name 'rGrid' does not exist in the current context Yet Intellisense and Object Exporer say it's valid. Why is that?
I lifted some nice code to handle memberships, but I want to add a customer specific field. My issue is how to reference my class from the inline c# code.
[Code]....
The problem is the line csUserProperties.AddNew(intUserId, lngCustomerId); -- I get the error "The name 'csUserProperties' does not exist in the current context. I have <%@ Import Namespace="csUserProperties" %> at the top of the file. I also tried everything with no namespace in the class below.
i am gettign this error
Compiler Error Message:
CS0103: The name 'lblRegion' does not exist in the current context
Source Error:
[Code]....
Line 31: {Line 32: Line 33: lblRegion.Text = dt.Rows[0]["RegionName"].ToString();Line 34: lblCountry.Text = dt.Rows[0]["CountryName"].ToString();Line 35: lblCountryCode.Text = dt.Rows[0]["CountryCode"].ToString();
this is source code:
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Net;
using System.Xml;
public partial class CSharp : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
//Get IP Address
string ipaddress;
ipaddress = Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
if (ipaddress == "" || ipaddress == null)
ipaddress = Request.ServerVariables["REMOTE_ADDR"];
DataTable dt = GetLocation(ipaddress);
if (dt != null)
{
if (dt.Rows.Count > 0)
{
lblCity.Text = dt.Rows[0]["City"].ToString();
lblRegion.Text = dt.Rows[0]["RegionName"].ToString();
lblCountry.Text = dt.Rows[0]["CountryName"].ToString();
lblCountryCode.Text = dt.Rows[0]["CountryCode"].ToString();
}
else
{
}
}
}
private DataTable GetLocation(string ipaddress)
{
//Create a WebRequest
WebRequest rssReq = WebRequest.Create("[URL]xml/" + ipaddress);
//Create a Proxy
WebProxy px = new WebProxy("[URL]+ ipaddress, true);
//Assign the proxy to the WebRequest
rssReq.Proxy = px;
//Set the timeout in Seconds for the WebRequest
rssReq.Timeout = 2000;
try
{
//Get the WebResponse
WebResponse rep = rssReq.GetResponse();
//Read the Response in a XMLTextReader
XmlTextReader xtr = new XmlTextReader(rep.GetResponseStream());
//Create a new DataSet
DataSet ds = new DataSet();
//Read the Response into the DataSet
ds.ReadXml(xtr);
return ds.Tables[0];
}
catch
{
return null;
}
}
}
I get the message "The name DropDownList1 does not exist in the current context". Without using a master page, I can get it to work. It's when I bring this code over to a master page is when I get this error. I'm trying to auto populated a drop down list. Here is my code...
protected void Page_Load(object sender, EventArgs e)
{
if (this.IsPostBack == false)
{ [code]....
This isnt a project, I made a New Website. I can't figure out why this will work outside of my master page and not in .
Oh and im not putting this code inside the SMC.master.cs file, It goes inside my Tool.aspx.cs file
I worked in C Sharp code works vote and found the problem appointed Data ReaderIf you will allow me in the solution
protected void Page_Load(object sender, EventArgs e)
{
OleDbCommand cmd2 = new OleDbCommand("select Q,a1,a2,a3,a4 from ope", Con);
Con.Open();
OleDbDataReader dr = cmd2.ExecuteReader ();
if (dr.Read())
[code]...
The name 'label2' does not exist in the current context.
this is my code it is for resizing image
public string img_resize(string picname, int maxHeight, int maxWidth)
{
System.Drawing.Image currentImage = System.Drawing.Image.FromFile(Server.MapPath("image/house") + picname);
[Code]...
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS0103: The name 'IMAGE_DIRECTORY' does not exist in the current contextSource Error:
Line 84:
Line 85: if (imgHeight != currentImage.Height | imgWidth != currentImage.Width) {
Line 86: html = "<a href="" + IMAGE_DIRECTORY + Path.GetFileName(s) + "">" + "<img src="ShowThumbnail.aspx?img=" + Path.GetFileName(s) + "&w=" + imgWidth + "&h=" + imgHeight + "" " + "height="" + imgHeight + "" width="" + imgWidth + "" border=1>" + "</a>"; Line 87: } else {
Line 88:
My asp.net page runs fine in VWD Express 2010 but on the server i get this error:
[Code]....
[Code]....
[Code]....
I am facing a weird issue.I have a label on the front end but when I try to use it on the code-behind and run my code I obtain an error: Label does not exist in the current context! The label is shown in intellisense and was working earlier.My team mate had created a back up of the file and it stopped working after that.I deleted the back up files and tried but it doesn't seem to work.
The following is the code snippet of the front end as well as the code behind:
[Code]....
I have a dropdownlist as defined on a page in the following way:
<asp:DetailsView ID="DetailsView1" runat="server" AutoGenerateRows="False"
Below is my code :
protected void ImageButton2_Click1(object sender, ImageClickEventArgs e) {
if (TextBox1.Text != "0") {
string price = RadioButton2.Checked ? TextBox1.Text : "";
} else {
string price = TextBox1.Text = "";
[Code]......
but below error happen:
the name 'price' doesn't exist in current context
here I define price in if condition...
Server Error in '/change image in gridview final' Application.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS0103: The name 'FileUpload1' does not exist in the current context
Source Error:
Line 46: protected void OnRowUpdating(object sender, GridViewUpdateEventArgs e)
Line 47: {
Line 48: if (FileUpload1.HasFile)
Line 49: {
Line 50: HttpPostedFile file = ((FileUpload)GridView1.Rows[e.RowIndex].FindControl("FileUpload1")).PostedFile;
[Code].....
I am trying to change the NavigateURL property in the code behind file however I get the error "The Name Hyperlink1 does not exist in the current context"
This is my code behind:
[Code]....
And this is my ASP.Net Page:
[Code]....
I can reference other controls such as dropdownlist1 however hyperlink controls do not work.
var kisaicerik = CKEDITOR.instances.<% = txtKisaIcerik.ClientID %>.getData();
I am taking this error: The name 'txtKisaIcerik' does not exist in the current context.I know txtkisaicerik is not in my page but it will.I want javascript error's shown in warning or not show.How can i do?
I have an aspx page containing a number of asp:Repeater Controls.Im not using the default code-behind file that is generated, ive changed this to file in a different folder.In the code-behind, i populate the repeater controls, all was workign fine until i added another repeater control to the aspx page.In the code-behind, the intellisense picks up this control and i can access its methods and properties to set the datasource and bind the data. However, when i go to build the project, i get an error "The name Repeater1 does not exist in the current context"Firstly, all the other repeater controls, declared in exactly the same way, do not throw throw this error.Secondly, yes the repeater does have a runat="server" tag.Thirdly, It is not inside any other controls.I have tried various different methods of accessing this repater instead of just "Repeater1." but each returns null:
Repeater r1 = (Repeater)Page.FindControl("Repeater1") ;
Repeater r1 = (Repeater)Page.Master.FindControl("Repeater1");
Repeater r1 = (Repeater)Master.FindControl("Repeater1") ;
Ive no idea why this "doesnt exist in the current context" as all the other controls on this page do, even if i create a literal i get the same problem.
Compiler Error Message: CS0103: The name 'LabeClientID' does not exist in the current context
I have a label in my grid view. I am writing the text value for this label in the page load event. This value is used in creating a link in the grid view (Bold code). Why am I getting compiler error?
How do I accomplish this?
<asp:GridView ID="gvConcurrentCases" runat="server"
EmptyDataText="No Concurrent cases Found"
AutoGenerateColumns="False" EnableViewState = "true" >
<Columns>
[Code]....
I have added Datalist in .aspx page when when i am trying to access it on .aspx.cs file I get an errory saying Datalist1 does not exist in curretn context?
<asp:DataList ID="DataList1" runat="server" CellSpacing="3" RepeatDirection="Horizontal"
ShowFooter="False" ShowHeader="False" Width="100%">
<ItemTemplate>
<div class="book_div">
[Code].....
I am having a problem and yes I don't know what I am doing :)I need to have a calendar control or really any control i use set a parm to the selected or entered value. I have done some reading and I thought I found the answer but I am getting cmd does not exist in current context asp.net
[Code]....
[Code]....
i have hide the cancel button using javascript
and i wanted to display it when a listbox is visible hence i use these codes below
[Code]....
However i get a error saying The name 'document' does not exist in the current context. So how do i display the button?