Web Forms :: Object Reference Not Set To An Instance In User Control

Jul 15, 2010

i am trying to enter a value into a texbox that is placed inside a user control called CollectionRequest. i have referenced this user control in my code behind and created an instance of it but i seem to get the above error when i try to enter some manual text. code as follows:

protected CollectionRequest collReq;
protected void Page_Load( object sender, EventArgs e )
{
collReq = (CollectionRequest)LoadControl("~/CollectionRequest.ascx");
TextBox _txt_address = (TextBox)collReq.FindControl("txt_Address");
_txt_address.Text = "thisi is an address";
control has been referenced in source file
<%@ Reference Control="~/CollectionRequest.ascx"%>

i am caling this code in my Approval.ascx.cs code. both the user controls are displayed together in the default.aspx page one above the other.

View 11 Replies


Similar Messages:

Web Forms :: Assign User Control From Another User Control ? Giving Error Object Reference Is Not Set An Instance?

Feb 17, 2011

I am trying to assign user control from another user control ..first time its binding control successfully but when we refresh the data its giving error

saying "Object reference is not set an instance".

how to refresh data from another user control ...

My senerio below :

1 Aspx page

2. User control

calling usercontrol databinding method from aspx page but once it get refreshed ,not allowed to bind it again..

View 2 Replies

C# - Web User Control With Content Inside It / Object Reference Not Set To An Instance Of An Object

Aug 11, 2010

Usage :

[code]...

The problem is it gives me following error :

Object reference not set to an instance of an object.

Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.

Source Error:

Line 21: {
Line 22: base.OnInit(e);
Line 23: _ContentTemplate.InstantiateIn(BodyControlSpace);
Line 24: }
Line 25:

View 3 Replies

Forms Data Controls :: Object Reference Not Set To An Instance Of An Object Repeater Control

Apr 21, 2010

can you please help me to brainstorm the possible causes of this error. I've got a paged repeater with localisation bound programitcally to an sqldatasource using a stored proc. I can post code if needs be but it's rather long. I'm looking for typical causes of this error + will make note for future reference!

erver Error in '/WebSite4' Application.

Object reference not set to an instance of an object.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.

Source Error:

[Code]....

Line 233:Line 234: Repeater1.DataSource = PagedResultsLine 235: Repeater1.DataBind()Line 236: doPaging()Line 237: End Sub

View 9 Replies

Web Forms :: Accessing Control In Usercontrol / Error: Object Reference Not Set To An Instance Of An Object

Apr 19, 2010

In the same Code behind file I have:

// This works

Label lblTopNavBarInfo = (Label)Master.FindControl("lblTopNavBarInfo");

lblTopNavBarInfo.Text = "Currently Serving: + FirstName + " " + LastName ;
// This compiles but throws an error in the browser

LinkButton lnkBtnProductsOwned = (LinkButton)LeftNav_CustServ1.FindControl("ProductsOwned"); // The Control is visible

lnkBtnProductsOwned.Enabled = false; // Error: Object reference not set to an instance of an object.

View 6 Replies

Forms Data Controls :: Object Reference Not Set To An Instance Of An Object In Nested Repeater Control Of CheckBox List ...

Sep 24, 2010

[Code]....

I am getting error of in Foreach loop

[Code]....

How to resolve this situation or any other alternative to cum out of this problem.

View 6 Replies

Page.User.Identity.IsAuthenticated Returns Object Reference Not Set To Instance Of Object?

Dec 23, 2010

this works fine on my local site but as soon as i upload the site to my live server i get stem.NullReferenceException: Object reference not set to an instance of an object

on the first line of this:

if (!Page.User.Identity.IsAuthenticated)
{
pnlSignIn.Visible = true;
pnlSignOut.Visible = false;
}

View 1 Replies

Security :: Trying To Get The GUID After The User Has Logged In/Object Reference Not Set To An Instance Of An Object

Oct 20, 2010

What is wrong with this code? The error is Object reference not set to an instance of an object.

I have the below code in my class, then on the login page i need the GUID so i can perform a lookup in one of our custom tables. But then the error above pops up before the page even loads at the line Guid guid = (Guid)userInfo.ProviderUserKey;

[Code]....

View 4 Replies

If User.Identity.IsAuthenticated Then... Object Reference Not Set To An Instance Of An Object?

Jan 2, 2010

this problem is baffling me. I have a custom class that all my pages inherit from

Public Class Page : Inherits Page
Private Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs) Handles Me.Load
Display Admin Controls (Buttons) '

[code]...

View 2 Replies

Web Forms :: Object Reference Not Set To An Instance Of An Object Error When Remove Reference To Site Master Page

Sep 30, 2010

in my default.aspx page i have a dropdown List and a textbox with a submit button below that there are 2 listbox... and the dropdown list holds the names of the listbox

my logic here is to select an item from the dropdown list and put some text in the text box and submit the form which will add an item to the listbox selected.. but when i do this i get an error saying Object reference not set to an instance of an object. i tried to figure out the problem and found that when i remove the reference to the Site Master Page it works fine and when i undo and apply my reference back to the Site Master Page i get the same error.

[Code]....

View 2 Replies

Web Forms :: "object Reference Not Set To An Instance Of An Object" Error When Access The Dynamic Control

Nov 25, 2010

I got this error "object reference not set to an instance of an object" when i want to display the values of dynamic generated drop down lists by pressing a button to show the values in Listitem.

i have master page in which i use :

1)ScriptManger

2)UpdatePanel

3) treeview menu

Server side Code is:

[code]

View 3 Replies

C# - Access The Login Control Error "Object Reference Not Set To An Instance Of An Object"

Mar 24, 2011

I'm working on ASP.NET app and in the master page C# code I want to access the login control, so I have the following code:

Login login = new Login();
login = this.Master.FindControl("login") as Login;

But, I get exception "Object reference not set to an instance of an object" when this line

login = this.Master.FindControl("login") as Login;

is executed. I can't see what can be wrong...

View 3 Replies

Web Forms :: Master Page Control In Child Page Error "Object Reference Not Set To An Instance Of An Object"

Aug 31, 2010

i have create dynamic menu control , i have master page and login page , once the user login , i want to show the dynamic menu in my master page. below i try to call masterpage control in my child page ,but i throughs the error

Object reference not set to an instance of an object.
my master page code
public partial class MasterPage : System.Web.UI.MasterPage
{
protected void Page_Load(object sender, EventArgs e)
{
}
public string MyProperty
{
set
{
// lblUser.Text = value;
lblUser.Text = value; // here i got the error
}
}
}

My child page code

protected void btnwork_Click(object sender, EventArgs e)
{
((MasterPage)this.Master).MyProperty = "Text changed from Sub Page";
}

View 5 Replies

Web Forms :: Session Ended - But Server Error/ Object Reference Not Set To An Instance Of Object?

Nov 15, 2010

In the VS2005 environment, when I test my session to make sure the page redirects to the main page (itself) if the session is null, it works. There is no error.

The function I use for this is:

[code]....

However, when it is in the production environment in IIS 6.0, when the session has timed out, and I then do a postback by doing some slider control, I see the page reload but immediately thereafter, it throws a Server Error exception of : Object reference not set to an instance of object.

Looking at the stack trace, the event occured:

AJAXEnabledWebApplication1._Default.Slider1_TextChanged(Object sender, EventArgs e)

however, why is it that the Slider1_TextChanged event fired even even after during page_load, the page was told to do a response.direct ?? shouldn't the entire page have gone through a full-page refresh life cycle ? why did it continue on to attempt to raise the Slider1_TextChanged event?

View 1 Replies

Forms Data Controls :: Get The Value Of The Id Field In Gridview/Object Reference Not Set To An Instance Of An Object

Feb 1, 2010

I am trying to get the value of the id field in my gridview but I keep coming up with this error when i do selectedValue or selecteIndex

Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.

How do I get that id? What I am trying to do is when the user select that link it will delete that information from the database. Here's my code:

[Code]....

[Code]....

View 5 Replies

Web Forms :: Error When Using A BasePage Along With A Master Page/ Object Reference Not Set To An Instance Of An Object

Mar 6, 2010

I'm new to programming in ASP.NET, but I'm making my way through Wrox's Beginning ASP.NET 3.5 in C# and VB.NET.

I'm at a section where I'm creating a BasePage. I successfully created a BasePage by creating a new class file in my App_Code folder called BasePage.cs with the following code:

[Code]....

If I run that code everything works out fine. The page loads and all is well. But, if I try to do the same thing to a page that uses my MasterPage.master file, I get the following error:

Object reference not set to an instance of an object.

Description:

An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.

Why is that? In the example code from the book (that also uses a MasterPage.master file), everything excutes and runs just fine. But in my test, I get the above error. I've tried comparing my pages to the books included source pages, but I can't find any differences.

View 1 Replies

Web Forms :: Unable To Read Web.config File/Object Reference Not Set To An Instance Of An Object

Nov 2, 2010

I have a website written in C# that was running fine on one server. We moved it to another server and have a couple issues. I am mainly a VB.NET coder but can do a few things in C#. This is not a project - it is a website and can open it in VS2008 no problem. This is an admin site for the whole website where the user can add customer comments, etc. When logging in, it works fine. I can go to one of the admin pages after logging in and works. If I go to two other different pages, I get this error:

Object reference not set to an instance of an object.

[Code]....

It turns out this is in the main.master page and it is used by the other pages that load fine. The ApplicationTitle variable is set right in the web.config file and like I said, it shows on the other pages.

My question is why would this code work fine for some pages and not two others? All of these admin pages are under a folder called Admin and the web.config file is in the root folder of the website. Its almost like these two pages cannot see the web.config file in the root folder? Why would that be if thats the case?

View 3 Replies

Web Forms :: Error When Converting Session To String / Object Reference Not Set To Instance Of Object

May 7, 2015

I am getting object refernce error at line:if (Session["Tax"].ToString() == "9")

protected void Page_Load(object sender, EventArgs e)
{
if (Session["Tax"].ToString() == "9")
{
lblTax.Text = Session["Tax"].ToString();
}
else
{
lblTax.Text = "0";
}
}

Is anything wrong I have done?

View 1 Replies

Web Forms :: Returns Object Reference Not Set To An Instance Of The Object Because Of Empty Dataset

Aug 27, 2010

private void FillDetails(string pId, out string Name, out string Address)

[code]....

I have method called Filldetails(),This method uses stored procedure to retrieve information for product name and address based on productid passed from productdetails table.I am working on globalization project.We have this product information for US country but there is no product information for germany country.So dataset is empty for germany.As result I am getting error object reference not set to an instance of the object.

View 3 Replies

Web Forms :: Error When Adding To Listbox / Object Reference Not Set To An Instance Of An Object

Feb 19, 2010

I have just recently converted my VB code to C# and now having this error when I try to add an item to my listbox, and the value is coming from the item page. I get the error at this segement:

lstboxCart.Items.Add(cartItem.Display());

My listbox is supposed to add the product's name, quantity, and price onto one row.

Here's what I have so far:

[code]...

[Code]....

[Code]....

My guess is that the source of the problem could be in the foreach loop from my cart class, shouldn't I be using that for arrays only? If I need to post any markup code or any other class, let me know.

View 7 Replies

Forms Data Controls :: Get Error : Object Reference Not Set To An Instance Of An Object

Dec 2, 2010

I have a nested gridview

i get error:Object reference not set to an instance of an object

when i try to get the text in the footer template of the inner gridview when clicking on the linkbutton!!!

[code]....

View 5 Replies

Forms Data Controls :: Error : Object Reference Not Set To Instance Of The Object

Feb 3, 2010

I am using C# and VS 2008 attached with access database, where Date1 is the PKey in Text defined.

I am getting the above error when i am trying to insert it into the access database.

here is my code

aspx :

[Code]....

Code Behind :

[Code]....

View 5 Replies

Web Forms :: Dropdownlist.items.findbyValue(value) - Getting Object Reference Not Set To An Instance Of An Object

Jan 13, 2010

I am trying to use

[Code]....

with values I get from a database but I am getting Object reference not set to an instance of an object.

View 11 Replies

Forms Data Controls :: Get An "Object Reference Not Set To An Instance Of An Object?

Nov 14, 2010

My problem is I get an "Object reference not set to an instance of an object." error at runtime on the line "ddl2.SelectedValue = cat1". Ironically I got this from an example on the internet and the only difference is my Cat1 varible which has the correct value at runtime.

<asp:FormView
id="frmCustomer"
DataSourceID="srcCustomer"[code]....

View 15 Replies

Forms Data Controls :: Gridview And Object Reference Not Set To An Instance Of An Object?

Jul 10, 2010

I would like to enable/disable the field BagNo in my gridview, depending on the value of another field in the gridview called ScriptNo, when I click the edit button I get this message "Object reference not set to an instance of an object".

here is the code

Protected Sub GridView1_RowEditing(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewEditEventArgs) Handles GridView1.RowEditing
Dim row As GridViewRow = GridView1.Rows(e.NewEditIndex)
If DirectCast(row.FindControl("ScriptType"), TextBox).Text = "TTA" Then

[Code]....

View 6 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved