Web Forms :: Process Cannot Access The File It Is Being Used By Another Process?
Nov 6, 2010
My code is that I want to create a log file and log it upon a new user browsing the site. However, what i did was I put in a 6 second delay and then used another browser to access the page. And it threw an Exception saying it is being used by another process which is true. So how come I set it so that, if IT is being used by another process, WAIT and retry every 500 milliseconds until it becomes free/available?
here's the code:
protected void Page_Load(object sender, EventArgs e)
{if (!IsPostBack) // if this is the first time page loads, set k to 1
{ lognewuser();
}}
I've developed a popup email .aspx used on our intranet based web app that is auto generated with .pdf's attached. I'm developing with VS 2008 ASP.Net 3.5 C# and System.Net.Mail.MailMessage. I can create and send the email with no issues. The problem is with any attempt to open or delete the attachments I get the above error. The .pdf's a copied with the following code:
FileStream fsr = new FileStream(inFilename, FileMode.Open, FileAccess.Read, FileShare.Read); BinaryReader reader = new BinaryReader(fsr); byte[] bytes = new byte[fsr.Length]; reader.Read(bytes, 0, bytes.Length); FileStream fsw = new FileStream(outFileName, FileMode.Create, FileAccess.Write, FileShare.Write); BinaryWriter writer = new BinaryWriter(fsw); writer.Write(bytes, 0, bytes.Length); // clean up writer.Flush(); writer.Close(); writer = null; fsw.Close(); fsw.Dispose(); fsw = null; reader.Close(); reader = null; fsr.Close(); fsr.Dispose(); fsr = null; Later after sending the email I: mailMessage.Dispose(); mailMessage = null; foreach (string fileName in attachments) { if (File.Exists(fileName)) File.Delete(fileName); }
The error occurs at: the File.Delete(fileName);
how I can delete or reopen these files after sending the email?
I am having the text file which is used to track all the ip address which is available in the network and replace the content from"Reply from 172.29.116.3: bytes=32 time=1ms TTL=255" to 172.29.116.3.
For this task i am having 2 functions 1.runCMD() Function is used to create a file which ping all the ip address between 3 to 254 ("Reply from 172.29.116.3: bytes=32 time=1ms TTL=255").
2.Another function textFileReplace() which is used to replace the text from "Reply from 172.29.116.3: bytes=32 time=1ms TTL=255" to 172.29.116.3.
This process will continue every 30 minutes..
But i am having the error while accessing the function textFileReplace() as The process cannot access the file 'C:inetpub' because it is being used by another process.
When I delete all files from the directory path. then it will give me this error The process cannot access the file because it is being used by another process. How to solve this?
I am getting binary data from a SQL Server database field and am creating a document locally in a directory my application has permissions. However I am still getting the error specified in the title. I have tried numerous suggestions posted on the web including those suggested in previous posts on Stackoverflow. I have also used ProcessExplorer > Find Handle to locate the lock and it returns nothing as if the file is not locked.
I am using the code below to save the file to the file system and I then try to copy this file to a new location later in the application process within another method. It is this copy method that takes the path of the newly created file that throws the exception.
The file itself is created with its content and i can open it through Windows Explorer without any problems.
Am I missing something completely obvious? Am I creating the file correctly from the database?
// Get file from DB FileStream fs = new FileStream( "C:myTempDirectorymyFile.doc", FileMode.OpenOrCreate, FileAccess.Write); BinaryWriter br = new BinaryWriter(fs); br.Write("BinaryDataFromDB"); fs.Flush(); fs.Close(); fs.Dispose(); // Copy file File.Copy(sourceFileName, destinationFilename, true);
I am using a AsyncUpload(telerik), i am in a point where i am supposed to save the File to a certain Folder. First I check if the directory exist
Code: Dim baseDire As String = Server.MapPath("~/MyFILES/") If IO.Directory.Exists(baseDire & Request("Req_ID").ToString()) = False Then IO.Directory.CreateDirectory(baseDire & Request("Req_ID").ToString()) End If
Because i am doing multiple Upload , i will have to loop through the items of the Upload control and save to a folder.
Code: For Each file As UploadedFile In UploadPropDoc.UploadedFiles Dim bytes(file.ContentLength - 1) As Byte file.InputStream.Read(bytes, 0, file.ContentLength) 'Save the File to the disk file.SaveAs(baseDire + file.GetName()) Next
Now when ever i debug this , when it comes to this line
Code: file.SaveAs(baseDire + file.GetName())
I get an Error
The process cannot access the file because it is being used by another process.
I have removed the Readonly in the Folder that it supposed to write to and gave everyone permission , but still the error persist.
I am trying to download a file from the server but i am getting this error:
The process cannot access xxxx the file because it is being used by another process
This is my CODE: string fileName="DownLoadFiles"; string filePath = hid_filepath.Value; FileInfo file = new FileInfo(filePath); System.Net.WebClient wc = new System.Net.WebClient(); wc.DownloadFile(new Uri(fileName, filePath);
Foe ur Information:the file is not opened or not used.
If I watch the processes tab in Task Manager on the web server I see "cmd.exe" under the context of 'administrator' but it just hangs. For test purposes c:SendV80s.bat: copy c: oot.ini c:zzz.txt
If I logon onto the webserver's console and execute SendV80s.bat it works and exits without issue. But when I execute the same batch file via the Submit button it gets stuck executing in Task Manager/Process. I believe this has something to do with the fact that cmd is not running in a full environment/desktop context. I just noticed this on the actual console of the webserver (not in my RDP console but console 0 instead)
A pop-up box stating: CMD.exe Application error The application failed to initialize properly (0xc0000142). Click OK to terminate the application. And when I click on the OK button my ASPX page's WaitForExit is satisfied and the continues processing normally.
I'm trying to write a text file form my web page, But every time I'm having this error System.IO.IOException: The process cannot access the file '.txt' because it is being used by another process. This is mode code for write file.
The process cannot access the file 'D:InetPubReefJunkiesUsersillProfilePicture Thumb340x_la-rouxsmall.jpg' because it is being used by another process.
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.IOException: The process cannot access the file 'D:InetPubReefJunkiesUsersillProfilePicture Thumb340x_la-rouxsmall.jpg' because it is being used by another process.
I simply want to create one file and then delete it, means I want to access one file subsequently. I am getting the very familiar error as shown in title. (Process can't access the file,) I have tried using file stream and all other stuff that I found from Googling but no success so far. Does any body have small and neat solution? in short, I would like to run the following statements without any error.File.Create("C:\hsp1.txt");
I know that similar questions have been asked all over the place, but I'm having trouble finding one that relates directly to what I'm after.
I have a website where a user uploads a data file, then that file is transformed and imported into SQL. The file could be up to 50mb in size, and some times this process can take 30 minutes or sometimes even longer.
I realise I need to palm off the actual work to another process, and poll that process on the web page. I'm wondering what the best approach would be though? Being a web developer by trade, I'm finding all this new Windows Service stuff a bit confusing, and I just wanted somewhere to start.
So:
Can I do / should I being doing this with a windows service? if so, how?
Should I use WCF? If this runs under IIS, will I have problems with aspnet_wp.exe recycling and timing out my process?
clarifications
The data is imported into sql, there's no file distribution taking place.
If there is a failure, it absolutely MUST be reported to the user. The web page will poll every, lets say, 5 seconds, from the time the async task begins, to get the 'status' of the import. Once it's finished another response will tell the page to stop polling for status updates.
queries on final decision
ok, so as I thought, it seems that a windows service is the best idea. So as to HOW to get it to work, it seems the 'put the file there and wait for the service to pick it up' idea is the generally accepted way, is there a way I can start a process run by the service, without it having to constantly be checking a database table / folder? As I said earlier, I don't have any experience with Windows Services - I wondered if I put a public method in the service, can I call it somehow?
I keep receiving an exception with the message "Logon failure: unknown user name or bad password". Im absolutelly sure that i'm submiting my correct username/pwd
I have a .NET infra code running both within the IIS worker process and within a desktop client app. How can the .NET code determine whether it is running within an IIS worker process?
I know that I could check the name of the process (w3wp.exe, for instance), but I would like a more robust approach. I wish to make a side note. This is not a production need. I need this information to enable certain scenarios useful during the development and testing phase. Specifically to ease the testing of secure vs non secure configurations.
When I hit the run button (in my Default.aspx), a process starts (this process contacts a webservice to get some files, etc). How do I: Ensure that only a single process is running at a time (i.e. if I refresh the browser, I don't want to start the process a second time)Track progress - there are 4 points of the process (at 25%, 50%, 75%, 100%) that I want to track, and when each part completes, I want to update the progress bar. I have a status object for the running process, but the question is how to update the progress bar automatically? Do I need to use threads to achieve the above two?
I have a stored procedure which fetches data after joining 8-9 tables and inserts that into a temp table. It was running fine till now, but now when the amount of data fetched have exceeded 20000, the SP is breaking. I have debugged the sp and found that this main query is failing after returning arround 15000-16000 records.
The error message says Transaction (Process ID) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction. I know what is deadlock, but when i checked with SP_LOCK stored proc i only found that my process is running on database only. So how is this getting deadlocked when there are no other processes running simultaneously on server.
I have a project with C# ASP.Net. I should create a web site which has categories.There will be a button and textbox and when I click this button there will be created a new web page and button and what I wrote text box it will be new button's text. At the same time, this created button's text will saved at SQL Server.I tried a create new button on page load but when I execute the project the button was created but I want to create with another button.These are for buttons; and these are for a new web page;(but there is an error -->Sayac.txt is already using)
I'm uploading an excel file and viewing it in a grid. But if I need to upload the file again in a couple of minutes I get an error that the file is being used by another process, so I cannot upload the file again. The file is always the same name.
I have a code that sends email using smtp server. There is an attachement file called test.pdf. the code is like this. This code is called from button Click event.
I have one gridview in that i have three columns "FileName" "Open" and "Delte" if user Opens clicks on open Pdf file opens in new window that time if user clicks on Delete Button then its giving Error that "Process is using by Some one" ...
currently we are configured execution Timeout="1200" (The default is 110 seconds) and maxRequestLength="12288" (The default is 4096 KB)but some times users upload files above 12MB so we are getting "Maximum request length exceeded" error.we are checking the file size using client side javascript ActiveXObject object. but ActiveXObject only works in IE not in others like mozilla,crome,..Jacescript Code are
[Code]....
how can i check the file size before uploading process with support all the browser.any posiblities for checking file size before server side script/object?