would the web.config/machine.config connection string look something like this:-
<connectionStrings>
<add name="DB2dbname" connectionString="Data Source=Db2servername;uid=my userId;pwd=myuseridpawd;mode=SHARE;dbalias=DB2TEST " providerName="System.Data.OleDb.OleDbConnection"/>
I'm facing very odd problem with my application. I've been developing my own custom memberhip provider (derived from MembershipProvider, of course) and everything was working smoothly, until something odd happened. In my config file, I register my provider with such code:
[Code]....
When I deploy my site, I get this error message:
Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Input string was not in a correct format.
Source Error:
Line 62: <clear/>
Line 63: <add name="CustomSqlMembershipProvider"
Line 64: type="My_Membership.CustomSqlMembershipProvider"
Line 65: applicationName="My Application"
Line 66: enablePasswordRetrieval="false"
I have a db connection string 'ApplicationServices' defined in the connectionString section of web.config and 3 Entity Framework connection strings which have the provider connection string attribute with the same connection string as the one in 'ApplicationServices'. Is there a way to reference connectionString in 'ApplicationServices' for the provider connection string attribute of the EF connection string in the web.config, rather than providing the connection string all over again?
View 1 RepliesI'm bulding document-from-template engine. At certain points I need to match on Reg Exp groups and replace template text with content from a db.
I 'hardcoded' my RegExp initially, doing something like: Regex r = new Regex(@"{DocSectionToggle::(?<ColumnName>w+)::(?<ResponseValue>.+)}[[(?<SectionContent>.+)]]", RegexOptions.Multiline);
it does group capture, so the syntax isn't the prettiest.
Just to make things neater and because I want' to keep the patterns in web.config or elsewhere, I've 'evolved' algorithm to something like:
[code]...
But I'm getting an error: 'Input string was not in correct format'.
Is this a limitation of string.Format(...)?
[code]....
Isn't this how u convert string to int ?
int.Parse(e.CommandArgument.ToString());
Whats wrong ?
just for my testing purpose i know i can define both the connection's outside in a single web config file by different name's and access them in my front end according to it but what if i want to have seprate for both connection's web.config situation is like this see image so i want to access my connections from second web config file how i can do that.
[Code]...
i tired this but its giving error
[Code]....
I finished my first asp mvc project and want to post it to a iis7/sql2008 server.I published the site just fine and migrated the sqlexpress database to sql2008 with no problems.However, when I run the program it still connects tp sqlexpress and opens a user instance.For the life of me I cannot get the connection string correct:
The current sring is:
<add name="AlertEntities" connectionString="metadata=res://*/Models.Alert.csdl|res://*/Models.Alert.ssdl|res://*/Models.Alert.msl;provider=System.Data.SqlClient;provider connection string="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Alert.mdf;Integrated
Security=True;User Instance=True;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient" />
</connectionStrings>
How do I change this to make it see the sql2008 database?
I am preparing for an Access2007 db conversion at the beginning of the year and would like to know what the best process would be for connecting to the sqlserver2005 database. I have read about adding the connection string to the web.config file. I have also read about using ADO.NET and put the connection information into a class and not the web.config file.
I would like to hear from others as to what you have used, are using, or plan on using for a webapp (vs2010), and why so I can get an understanding.
I've completed the 22 first tutorials of the data access tutorials, and now I'm trying to apply these techniques to a project I started myself.But i'm stuck trying to replace an id by its value from another table, so I want to show all information about a car ("wagen") , but instead of showing "1" as driver ("chauffeur") I want to show his name.I've written this querry for the "wagen" table in the dal
[Code]....
When i write the following lines then i get an error like..
Input string was not in a correct format.
[code]....
As far as I can tell, I've got the input string in an acceptable format (It's pulling a number that is the value from the Agent dropdownlist) and I'm even having the code convert the value to Int32. The database column is set to "int" and the DAL and BLL both reinforce this. Am I missing something? I can't post everything because the sensitive nature of some of the code, but here's some of what I've got. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.FormatException: Input string was not in a correct format.Source Error:
[Code]....
Here's the code from the BLL
[Code]....
In my application i write the code like this
byte[] byt = new byte[Convert.ToSbyte(textbox1.Text)];
it is giving the error that input string was not in a correct format.
Intially I have a gridView that upon rowselect I wish to pass multiple values from a commandArgument.
But.. I'm receiving the below error:
Input string was not in a correct format.
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.FormatException: Input string was not in a correct format.
Source Error:
[Code]....
I have deploy my web site, it contains a project!
in MyWeb there are all the aspx page and some entites datamodel, in MyApp there are the class with function like "getter data from DB" and there is a entity data model.
afeter the deploy, I have only the web.config and the connection string for the entity datamodel....itīs run ok, read/write the data on the DB.
The problem is with MyApp.....after the deploy it is a dll file and I donīt have the app.config and the entity inside it donīt run, not read/write nothing on the DB.
There arenīt error or messager but not read/write the data in the MyApp project.
all run on the iis 7
now...the question is:
I lose the connection string (in app.config) after the deploy?
Can I put a entity in the MyWeb and read it in another project (myApp)?
ps: for connect to DB I use not the c# code:
var db=from x in AccessDB.Example select x;
In a simple ASPX page, I have an SqlDataSource and a DataList control bound to it.It shows 3 columns; UserName, DateTimeStamp, and Comment.The database table has these defined as nvarchar(24), datetime, and nvarchar(80).The UserName and DateTimeStamp are shown in the ItemTemplate as Labels, while the Comment is a multiline TextBox.I have an event handler for the OnTextChanged for the Comment so that I can update the table as soon as the user tabs off the TextBox.I use the UserName and DateTimeStamp as the Primary Key, and pass all 3 to a stored procedure, where the parameters are declared the same types as the table.What I'm getting though is an "Input string was not in the correct format", which can only be the DateTime that I am passing.
I've tried different date/time formats, but so far come up empty as to the one that will actually work from the C# code.All the different formats I've tried work fine if I pass them to the SP directly via Management Studio, but all throw an error when I use
SqlDataSource.UpdateParameters.Add("DateTimeStamp", System.Data.DbType.DateTime, lblDateTimeStamp.Text);
I have a Date Range in my asp page
<ks:DatePicker ID="txtMinDate" runat="server" Width="65px"></ks:DatePicker>
-<ks:DatePicker ID="txtMaxDate" runat="server" Width="65px"></ks:DatePicker>
Based on the date range selected and input in tthree more textboxes I populate the data grid. The code for the Data Grid is
grvLamination.DataSource = this.Controller.SearchLaminationMain(txtMinDate.Text,txtMaxDate.Text,txtJobNumber.Text,
txtJobName.Text, txtOperator.Text, System.Convert.ToInt32(txtShift.Text));
when i run this code it says Input String not in correct format, if i pass null values for all the parameters , I am using Linq to sql and If i execute the stored proc with null values in the database it works fine, it does not let me pass null values from the C sharp page.
I have a field in my products table called dProductPrice which is a datatype of money. In my datalist i need to display the field as currently it shows price as e,g, 1.3500 but i need it to 2 decimal places so it is 1.35? in my datalist i have done this using the format as well
<%# DataBinder.Eval(Container.DataItem, "dProduct_price", "{0:n2}") %>'
now i have a datatable with a column called cost with datatype decimal.
cartDR["Cost"] = Decimal.Parse(lblProductPrice.Text);
But when i try to populate it i can the input string was not in a correct format. But it works ok if i remove {0:n2}
Is it legal to define a default value for a parameter the way I am in the code below? It keeps throwing an "Input string was not in a correct format." error for me. Is there a different way I should be doing this?
<asp:LinqDataSource ID="lds_numbers" runat="server" ContextTypeName="nrm.prop.myDataContext"
TableName="Sources" Where="myNumber== @myNumber" EnableDelete="True"
EnableInsert="True" EnableUpdate="True">
<WhereParameters>
<asp:Parameter DefaultValue='<%= this.StateItems["myNumber"] %>' Name="myNumber" Type="Int32" />
</WhereParameters>
This is the error:
Input string was not in a correct format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.FormatException: Input string was not in a correct format.
Source Error:
[Code]....
im using iTextSharp to render pdf files.i try to append a srting to HtmltoPdf class like this
first.AppendHtml("<div style="width:501px;height:251px;padding:18px;border:1px solid #cbcccd;font-family:Verdana, Geneva, sans-serif;font-size:9px;color:#000;float:left;"><table width="501px" border="0" cellspacing="0" cellpadding="0"><tr><td width="269"
height="15">Name : Bryan Costa</td>" + [code]...
what is the wrong with this string.
[Code...]
Dim RetVal
As SqlParameter =
New SqlParameter()
RetVal.ParameterName = "@NewID"
RetVal.SqlDbType = SqlDbType.Int
RetVal.Size = 5
RetVal.Direction = ParameterDirection.Output command.Parameters.Add(RetVal)
connection.Open()
command.ExecuteNonQuery()
TextBox3.Text = command.Parameters("@NewID").Value Convert.ToInt32(TextBox3.Text)
i wants to convert string to long , below the code, i try to convert string type to long
but it throws the error: Input string was not in a correct format.
long works= Int64.Parse((Label2.Text.ToString()));
string kannan = RupeesIntoWords.ConvertRupeeToWord(works);
I'm getting the above error when I get to the following line:
string result = Convert.ToString(command.ExecuteScalar());
am really confused because everything I've read tells me that that line is correct!
My code is as follows:
[Code]....
My code is working fine if the statement (numtickets > tickav) is true (if tickets available is greater than tickets ordered) But if other wise, it throws in this error "FormatException was unhandled by user code, Input string was not in a correct format" on int numTick = Convert.ToInt32 (txtNumber OfTickets. Text);
Code:
namespace TicketsApp {
public partial class TicketOrder : System.Web.UI.Page {
protected void Page_Load(object sender, EventArgs e) {
if (Session["description"] != null && Session["EventID"] != null && Session["numtickets"] != null && Session["ticketcost"] != null
&& Session["State"] != null && Session["Section"] != null && Session["Row"] != null && Session["date"] != null)
[code]...
I get the following error when I run my application. It was working fine in 3.5. I am facing this issue when we migrated to .Net 4.0. Has anything changed in 4.0 types or something else which is causing this?
[Code]....