Why Does Uodotnet With Connection Pooling Timeout
Mar 28, 2011
We're trying to get connection pooling working with uodotnet and currently failing miserably. When we turn connection pooling off everything works as expected, but when we turn it on we often get timeouts or errors with one of the following trace outputs:
2011-03-28T15:09:28 System.Exception: Non-negative number required.
[Code]....
Not all the requests fail (for example, when run through a load testing tool, 7/20 requests failed with the timeout problem).
It seems that the sessions are remaining in the pool and new attempts to create a session are repeating until the timeout limit is reached (30 seconds). We're using uodotnet.dll version 2.1.1.7196 and UniVerse version 10.3. running on an HP-UX server. We've got a single license on the dev machine we're testing on with 10 connections available in the pool (theoretically!). We're writing an ASP.Net web site, and we create a new session in the Page_Load() event which is passed to all UniVerse routines and then call close on the session in Page_Unload()/Page_Error().
to what we're doing wrong? We expected that connection pooling would improve performance, falling back on the standard mechanism if the pool was full, but whereas the non-pooled version works fine with 20 simultaneous requests, the pooled version regularly fails. We've set the connection pooling on in the application's web.config, setting MinPoolSize to 1 and MaxPoolSize to 10, leaving everything else at the defaults.
View 1 Replies
Similar Messages:
Apr 7, 2010
In my DAL i have more than 100 methods/Function, each and every method am opening the sqlconnection and closing the connection, this is taking too much of time to establish the connection at every time. So what i expect is one common class will create the SqlConnection that will check if the connection is Broken or Closed then create the connection again else return the connection, how to do this(Also i would like to apply ConnectionPooling).
View 7 Replies
Jul 12, 2010
Should I write my own connection pooling scheme?
(Question rewritten again so I can upvote peoples answers)
View 2 Replies
Dec 7, 2010
If I open a connection and don't close it after query execution completes, store it somewhere, and use it next time a request comes in, isn't it something similar to what .net does? Is it possible to maintain a pool of connections according to our requirements without depending on ADO.NET's internal mechanism? In case of ODBC, I read somewhere that connection pooling will have to be enabled from ODBC datasources and that it cannot be set from within .net. What if I open a few ODB connections, leave them open and
use those whenever a request comes in and close all of them when I know that I dont need them anymore. How is it different from connection pooling?
View 2 Replies
Apr 11, 2010
I am designing an ASP.NET (3.5) web application that connects to a Rocket Software UniVerse database.
I am shooting for a RESTful design and a MVC pattern. Rocket provides a .NET library called UniObjects.NET which handles everything for connecting and retrieving information from the database.
What would be the best way to in general to log my users into the database, then use that session via connection pooling? I see that in 3.5 there is the ASP.NET Routing Infrastructure and that looks promising am I in the right direction on this? Also does C# support decorators like Python and Java?
View 2 Replies
Apr 28, 2010
How does .NET maintain the Connection Pooling internally?
Where it is stored for different kind of aplication(WebApplication,Console)?
Can we configure the IIS for Connection Pooling?
View 4 Replies
Jan 12, 2010
Some one can explain me the behaviour i am observing is correct..?
[Code]....
and here is the connection string:
<add name="SecurityDB" connectionString="Data Source=xyz,8000;Initial Catalog=abcd;User ID=abcd;Password=defg" providerName="System.Data.SqlClient"></add>
i expect it to fail at 101 iteration as the default max pool size is 100 and i am not releasing any connection after i open(ie., Not closing or Disposing). But the strange behaviour is i can go up to 230 iterations and then it gives me a timeout error, can not acquire new connection.
When i look in SQL Database for number of connections created it is only 100.
My question is : When connection is not released, how is it able to re-use the previously opened connection.
View 9 Replies
Jun 9, 2010
I am using microsoft enterprise libarary to connect to mysql using mysql .net connector (latest version 6.2.3)
But i am facing a problem of too many connections and connection pool reached maximum limit issue.
As connection is disposed by enterprise library iteself so i dont close the connection anywhere.
So after two or three hours i found i have 100 mysql connections in sleep mode which are doing nothing and are not being reused from the code .
So i want to ask is there any issue with my code or is there any issue with mysql connector
View 1 Replies
Mar 10, 2010
How to check/confirm that whether SQL connection pooling is enabled for a sharepoint 2007 web-application ?
View 1 Replies
Oct 6, 2010
I get this error message in the EventViewer every now and then:
[Code]....
View 5 Replies
Jan 20, 2011
I have developed a web service using ADO.Net entity framework3.5 and LINQTOSQL3.5.
Now i want to increase the connection timeout? How should i ?
View 4 Replies
Nov 29, 2010
can I increase this by modifying the connection string in the web.config
View 4 Replies
Oct 7, 2010
how to handle if the page request from server is time out or
the client connection to server is already cut off ...??
View 5 Replies
Jan 20, 2011
I need to set connection timeout in oledb connection string like
stringA= "Provider=SQLOLEDB.1;Persist Security Info=False;User
ID=sa;PWD=password;Initial Catalog=DB;Data Source=127.0.0.1;Connect
Timeout=30" [code]....
View 2 Replies
Mar 7, 2011
What is the difference between connection timeout and command timeout?
In our application sometimes it is showing a timeout error. When we increased the command timeout value to 100(from default 30), its working. Is there any issue in increasing the command timeout value.
View 2 Replies
Dec 3, 2010
We have been getting this Oracle connection pool exception a lot recently for our ASP.NET website. This is the detailed exception message:
Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.
This is our connection string
User ID=user1;password=password1;DATA SOURCE=Datasource1
how to set max pool size to 1 so that I can debug it on my local?
what is the recommended pool size for a website with 10,000 users?
View 1 Replies
Nov 15, 2010
Alright, we have two database servers, one is owned by us, one owned by a partner. Our partners have been having issues lately that have been causing us numerous sql timeout errors, which takes down our whole system. We'd prefer to limit the time those queries can take to say 20 seconds max, otherwise quit trying and throw the error (which we can catch with a try/catch block). Couple of questions: Is there a way to set a particular db/connection string to timeout after X seconds? Is this the best way to quarantine that other system? or are there better ways to go about this?
View 2 Replies
Jun 13, 2012
I have the problem of Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.
I am opening and closing SqlConnection properly.
View 1 Replies
May 19, 2010
I'm getting the following error after uploading my site on live server:Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.i'm using the following code:
public static IQueryable<Property> Properties(string name, string city, string state, int pageIndex, int pageSize, ref int total)
{
ServerDataContext server = new ServerDataContext();
total = server.Properties.Count(x => x.Name.StartsWith(name) && x.City.StartsWith(city) && x.State.Contains(state));
return server.Properties.Where(x => x.Name.StartsWith(name) && x.City.StartsWith(city) && x.State.Contains(state)).Skip(pageIndex * pageSize - pageSize).Take(pageSize);
}
View 1 Replies
Jun 13, 2012
I am getting this error:
"timeout expired. the timeout period elapsed prior to obtaining a connection from the pool"
when I am testing my webiste on production server. Its working perfectly on my local machine but not on production.
Sometimes it works and sometimes not.
View 1 Replies
Jan 27, 2011
We have the timeout value set to 120 in our <form> tag within the web.config. We do not have a session timeout set.. and we have various connection strings.
We are having a problem where a session variable will disappear (become NULL) .. but, the form evidently remains 'open'.. or no re-login is required..... so, my question(s):
1. what is the relationship between form timeout and session timeout
2. how do I set session timeout
View 1 Replies
Jan 20, 2010
Hopefully I am posting this in the correct forum.
I am having a problem with my ASP.Net Web application. The application is developed using vb.net and is linked to a SQL Server database. Let me explain how the application works and the problem I am experiencing. The system is an online web app which allows registered users to create a CV online. One of the pages within the app gives users the chance to add a cover note to their CV. The page that allows them to do this consists of only a textarea control and a button control. The textarea allows users to input up to 4,000 characters.
Once the user clicks the 'Save' button to save their cover note info, the following code then executes.This code checks to see if the CV already has cover note info, if it does, then the application runs an update statement, otherwise, it runs an insert statement.The table within the database which records the cover note information is called tbl_covernote and has three columns, covernote_id (int and autoincrement), cv_id(int), covernote_text (nvarchar(max)).
The error which occurs sometimes is as follows:
Dim dr As SqlDataReader
Dim param(0) As SqlParameter
Finally [code]...
View 11 Replies
Mar 5, 2010
I'm not having much fun with connection pooling. The website I've written does dip into the SQL server all the time and quite a lot of times per page. Every time I nip into the SQL Server to get or set something I open a connection...
comGeneral.Connection.Open()
... do or get what I need and then close it. From what I've read any of the following should close the connection and return "one connection" (?) to the pool (top one, only if reading)....
rdrGeneral = comGeneral.ExecuteReader(Data.CommandBehavior.CloseConnection)
comGeneral.Connection.Dispose()
comGeneral.Connection.Close()
... but that's not really working for me and I keep hitting the default max 100 open pools. So I've been doing all 3 of the above (again, top one, only if reading). But alas, still the stupid thing (Yes, I am aware I'm the stupid one) keeps hitting the max.
My new plan is to set pooling to false (pooling = false ?) across the entire website and take the performance hit which wont be terrible because I don't really do anything too demanding. Trouble is I don't know how, other than setting Pooling = False, but where exactly in the webconfig would this bit of code go?
View 7 Replies
Feb 15, 2010
I have an ASP.Net application that makes an AJAX request to retrieve at report. The report can run for a long time so I set the asyncpostbacktimeout in <asp:ScriptManager /> to 600. However, when I try to run the report, if it runs for longer than 90 seconds it fails to come back. I can see in the IIS logs that the POST request succeeded with a 200 status and I can see the time taken is much less than 600.
The web page dutifully waits for the entire 600 seconds before returning with a timeout error:
Error:
Sys.WebForms.PageRequestManagerTimeoutException:
The server request timed out.
Is there any setting I should be checking in IIS? Connection timeout is 900 seconds.
View 1 Replies
Sep 13, 2010
I'm using Visual Studio 2008, and my database is SQL Server 2000.
I want to add a connection to the Server Explorer in VS. The Data source is Microsoft SQL Server (SqlClient). After entering in all my information and I click Test Connection, it is successful.
But when I click OK, I get the error:
Unable to add data connection. ExecuteScalar requires an open and available connection. The connection's current state is closed.
View 3 Replies
