C# - Reusing PagedList Object On WCF

Jan 6, 2011

I have a custom collection PagedList<T> that is being returned from my WCF service as PagedListOfEntitySearchResultW_SH0Zpu5 when T is EntitySearchResult object. I want to reuse this PagedList<T> type between the application and the service. My scenario:

I've created a PagedList<T> type that inherits from List<T>. This type is on a separated assembly that is referenced on both application and WCF service. I'm using the /reference option on the scvutil to enable the type reusing. I also don't want any arrays returned so I also use the /collection to map to the generic List type. I'm using the following svcutil command to generate the service proxy:

"C:Program Files (x86)Microsoft SDKsWindowsv7.0ABinNETFX 4.0 Toolssvcutil.exe"
/collectionType:System.Collections.Generic.List`1
/reference:.... inDebugApp.Utilities.dll
http://localhost/App.MyService/MyService.svc?wsdl
/namespace:*,"App.ServiceReferences.MyService"
/out:..ServiceProxyMyService.cs
The PagedList object is something like:
[CollectionDataContract]
public partial class PagedList<T> : List<T>
{
public PagedList() { }
/// <summary>
/// Creates a new instance of the PagedList object and doesn't apply any pagination algorithm.
/// The only calculated property is the TotalPages, everything else needed must be passed to the object.
/// </summary>
/// <param name="source"></param>
/// <param name="pageNumber"></param>
/// <param name="pageSize"></param>
/// <param name="totalRecords"></param>
public PagedList(IEnumerable<T> source, int pageNumber, int pageSize, int totalRecords)
{
if (source == null)
source = new List<T>();
this.AddRange(source);
PagingInfo.PageNumber = pageNumber;
PageSize = pageSize;
TotalRecords = totalRecords;
}
public PagedList(IEnumerable<T> source, PagingInfo paging)
{
this.AddRange(source);
this._pagingInfo = paging;
}
[DataMember]
public int TotalRecords { get; set; }
[DataMember]
public int PageSize { get; set; }
public int TotalPages()
{
if (this.TotalRecords > 0 && PageSize > 0)
return (int)Math.Ceiling((double)TotalRecords / (double)PageSize);
else
return 0;
}
public bool? HasPreviousPage()
{
return (PagingInfo.PageNumber > 1);
}
public bool? HasNextPage() { return (PagingInfo.PageNumber < TotalPages()); }
public bool? IsFirstPage() { return PagingInfo.PageNumber == 1; }
public bool? IsLastPage() { return PagingInfo.PageNumber == TotalPages(); }
PagingInfo _pagingInfo = null;
[DataMember]
public PagingInfo PagingInfo
{
get {
if (_pagingInfo == null)
_pagingInfo = new PagingInfo();
return _pagingInfo;
}
set
{
_pagingInfo = value;
}
}
}

View 1 Replies


Similar Messages:

C# - Errors When Creating Custom Querable Object With MVC And Subsonic Pagedlist

Jun 8, 2010

I have the following code but when i try and create a new IQuerable i get an error that the interface cannot be implemented, if i take away the new i get a not implemented exception, have had to jump back and work on some old ASP classic sites for past month and for the life of me i can not wake my brain up into C# mode. The code is to create a list of priceItems, but instead of a categoryID (int) i am going to be showing the name as string.

public ActionResult ViewPriceItems(int? page)
{
var crm = 0;
page = GetPage(page);
// try and create items2
IQueryable<ViewPriceItemsModel> items2 = new IQueryable<ViewPriceItemsModel>();
// the data to be paged,but unmodified
var olditems = PriceItem.All().OrderBy(x => x.PriceItemID);
foreach (var item in olditems)
{
// set category as the name not the ID for easier reading
items2.Concat(new [] {new ViewPriceItemsModel {ID = item.PriceItemID,
Name = item.PriceItem_Name,
Category = PriceCategory.SingleOrDefault(
x => x.PriceCategoryID == item.PriceItem_PriceCategory_ID).PriceCategory_Name,
Display = item.PriceItems_DisplayMethod}});
}
crm = olditems.Count() / MaxResultsPerPage;
ViewData["numtpages"] = crm;
ViewData["curtpage"] = page + 1;
// return a paged result set
return View(new PagedList<ViewPriceItemsModel>(items2, page ?? 0, MaxResultsPerPage));
}

View 2 Replies

MVC :: View Strongly Typed With (PagedList Of Xxx)?

Jul 3, 2010

all i have this problem

[code]....

MVC :: View strongly typed with (PagedList of xxx?

View 3 Replies

C# - Reusing The Same Repeater ItemTemplate

Mar 11, 2010

I'm currently using a certain ItemTemplate for three repeaters that are all on the same page, but they are all bound to different data sources. Is there any way to refactor my web form without using a user control to easily refer to this template so I will only have to define it once?

View 2 Replies

Create Some Control For Reusing HTML?

Jun 24, 2010

I'm new to asp.net mvc. I'm looking to create some control for reusing HTML. I have a complex HTML box for example:

<div class="Box">
<div class="Top"></div>
<div class="Content">
<div style="padding:10px;">
[CONTENT GOES HERE]
</div>
</div>
<div class="Bottom"></div>
</div>

Previously using webforms I've been able to reuse this by inheriting from WebControl and override Render. But how can I implement this in MVC?

View 2 Replies

.net Mvc - Reusing Pages/controllers In Workflow

May 3, 2010

1) the user signs up for the first time. They see 3 different screens, their basic user information, their credit card, and some additional profile information. They complete these 3 steps in a wizard like fashion, where each time they hit "submit" they leave the current screen and move on to the next.2) the user already is signed up. He has links in the navigation to these 3 seperate pages. He can update them in any order. When he hits save, he doesn't leave the page he's on, it just shows something at the top that says "Credit Card Info saved..." or whatever. Possibly using ajax or maybe a full page refresh.I would like to reuse the code not only the view but also in the controller for these 3 screens between the two workflows, but without a ton of if...then logic to determine where to go next depending on whether its a first signup in the wizard or updating individual parts of a profile.

[code]...

View 2 Replies

C# - Assigning Values To Properties And Reusing The Code?

Sep 28, 2010

I have some code like this. But imagine that there are hundreds of lines like this all duplicated across multiple functions.

MyClass.prop1 = doingsomething("test1");
MyClass.prop2 = doingsomething("test55");

I want to reuse my code... how can I do it?

I want to do something like this:

foreach(ClassInfo)
{
dosomethingAssignment(ClassInfo.propertiesToAssign[i], ClassInfoStringIPassedToFunctionInFirstExample[i]);
}

Maybe this isn't the way to do this in C#, but what is the best way to reuse my code?

View 4 Replies

Prevent IIS From Reusing Worker Processes For Separate AppDomains

Sep 21, 2010

When IIS restarts an ASP.Net (2.0) web application, it can either:

Recycle the AppDomain: Unload the AppDomain and load a new AppDomain on the same process (e.g. when HttpRuntime.UnloadAppDomain() is called, when web.config is changed).
Recycle the process: unload the AppDomain and load a new one on a new process (e.g. when invoking Recycle command on an AppPool via inetmgr, or when memory limit is reached).

Due to some internal reasons (trouble with legacy native code we depend upon), we cannot allow the first option. We just can't load the application twice on the same process.

Can IIS be somehow told to never allow worker process reuse?

I've tried preventing it myself by tracking whether an application has already started on a process once using a Mutex, and if so - throwing an exception during Application_Start()); I've also tried terminating the process by calling Environment.Exit() during Application_End(). The problem with both methods is that it causes any requests that arrive during Application_End or Application_Start to fail (unlike a manual process recycle, which fails absolutely no requests because they are redirected to the new process right away).

View 2 Replies

Configuration :: Providing Source Code But Preventing From Reusing?

Apr 8, 2010

Our company has developed its own CMS system and there is a requirement that customers may purchase the source code for this system but only to be used for the one application (1 domain).My question is, is it possible to give them the source code but prevent them from reusing it to run another site (domain) for it.

My first thought was to have some license checking mechanism or have an uncompiled dll that checks the domain but obviously if they have the source code they can simply remove this code or checks.

View 1 Replies

Web Forms :: Reusing Class Properties Invoked In Masterpage In A User Control

Feb 2, 2010

I'm working on a project that uses a master page. When the page loads I'm calling a class (which I feed and ID into) to get back certain values for a location that the user has selected. Things like town name etc.

On the home page I have a user control which has some statistics for that location too.

Is there a way that I can get the user control to pull values from the class invoked by the Master Page (which has already been fed the ID, hit the db and pulled back the values), rather than creating a new instance of the class within the user control and having to supply the ID and hit the db all over again? This is now I'm calling the class in the masterpage. I have a method "CheckForStoredLocation" that goes off and gets all the data I need.

[Code]....

View 4 Replies

C# - Stop Site Reusing Session Id On Expiry - Force A New SessionId From The Global.asax.cs File?

Sep 30, 2010

I want to be able to log when a user ends their session on our application and record whether it was a sign out or a the session expired. I am using

cookies.Add(new HttpCookie("ASP.NET_SessionId", ""));

to set a new sessionId on sign out, but when the session expires, the sessionId is reused if the browser instance is not closed. In my web.config I have used

<sessionState mode="InProc" timeout="1" cookieName="session" regenerateExpiredSessionId="true" />

but still get sessions reused. I can't kill the cookie in Session_end() because I don't have access because there is no HttpContext or request, so I can't reset it that way. how I can force a new sessionId from the Global.asax.cs file?

View 2 Replies

Web Forms :: Session Ended - But Server Error/ Object Reference Not Set To An Instance Of Object?

Nov 15, 2010

In the VS2005 environment, when I test my session to make sure the page redirects to the main page (itself) if the session is null, it works. There is no error.

The function I use for this is:

[code]....

However, when it is in the production environment in IIS 6.0, when the session has timed out, and I then do a postback by doing some slider control, I see the page reload but immediately thereafter, it throws a Server Error exception of : Object reference not set to an instance of object.

Looking at the stack trace, the event occured:

AJAXEnabledWebApplication1._Default.Slider1_TextChanged(Object sender, EventArgs e)

however, why is it that the Slider1_TextChanged event fired even even after during page_load, the page was told to do a response.direct ?? shouldn't the entire page have gone through a full-page refresh life cycle ? why did it continue on to attempt to raise the Slider1_TextChanged event?

View 1 Replies

DataSource Controls :: Simple Login Form - Object Reference Not Set To An Instance Of An Object?

Apr 20, 2010

im tryin to create a login form.

and am receiving the following error:

Object reference not set to an instance of an object

[Code]....

and heres my aspx page:

[Code]....

Stored procedure:

[Code]....

View 2 Replies

Page.User.Identity.IsAuthenticated Returns Object Reference Not Set To Instance Of Object?

Dec 23, 2010

this works fine on my local site but as soon as i upload the site to my live server i get stem.NullReferenceException: Object reference not set to an instance of an object

on the first line of this:

if (!Page.User.Identity.IsAuthenticated)
{
pnlSignIn.Visible = true;
pnlSignOut.Visible = false;
}

View 1 Replies

Forms Data Controls :: Object Reference Not Set To An Instance Of An Object Repeater Control

Apr 21, 2010

can you please help me to brainstorm the possible causes of this error. I've got a paged repeater with localisation bound programitcally to an sqldatasource using a stored proc. I can post code if needs be but it's rather long. I'm looking for typical causes of this error + will make note for future reference!

erver Error in '/WebSite4' Application.

Object reference not set to an instance of an object.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.

Source Error:

[Code]....

Line 233:Line 234: Repeater1.DataSource = PagedResultsLine 235: Repeater1.DataBind()Line 236: doPaging()Line 237: End Sub

View 9 Replies

Forms Data Controls :: Get The Value Of The Id Field In Gridview/Object Reference Not Set To An Instance Of An Object

Feb 1, 2010

I am trying to get the value of the id field in my gridview but I keep coming up with this error when i do selectedValue or selecteIndex

Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.

How do I get that id? What I am trying to do is when the user select that link it will delete that information from the database. Here's my code:

[Code]....

[Code]....

View 5 Replies

Web Forms :: Error When Using A BasePage Along With A Master Page/ Object Reference Not Set To An Instance Of An Object

Mar 6, 2010

I'm new to programming in ASP.NET, but I'm making my way through Wrox's Beginning ASP.NET 3.5 in C# and VB.NET.

I'm at a section where I'm creating a BasePage. I successfully created a BasePage by creating a new class file in my App_Code folder called BasePage.cs with the following code:

[Code]....

If I run that code everything works out fine. The page loads and all is well. But, if I try to do the same thing to a page that uses my MasterPage.master file, I get the following error:

Object reference not set to an instance of an object.

Description:

An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.

Why is that? In the example code from the book (that also uses a MasterPage.master file), everything excutes and runs just fine. But in my test, I get the above error. I've tried comparing my pages to the books included source pages, but I can't find any differences.

View 1 Replies

Web Forms :: Accessing Control In Usercontrol / Error: Object Reference Not Set To An Instance Of An Object

Apr 19, 2010

In the same Code behind file I have:

// This works

Label lblTopNavBarInfo = (Label)Master.FindControl("lblTopNavBarInfo");

lblTopNavBarInfo.Text = "Currently Serving: + FirstName + " " + LastName ;
// This compiles but throws an error in the browser

LinkButton lnkBtnProductsOwned = (LinkButton)LeftNav_CustServ1.FindControl("ProductsOwned"); // The Control is visible

lnkBtnProductsOwned.Enabled = false; // Error: Object reference not set to an instance of an object.

View 6 Replies

Web Forms :: Unable To Read Web.config File/Object Reference Not Set To An Instance Of An Object

Nov 2, 2010

I have a website written in C# that was running fine on one server. We moved it to another server and have a couple issues. I am mainly a VB.NET coder but can do a few things in C#. This is not a project - it is a website and can open it in VS2008 no problem. This is an admin site for the whole website where the user can add customer comments, etc. When logging in, it works fine. I can go to one of the admin pages after logging in and works. If I go to two other different pages, I get this error:

Object reference not set to an instance of an object.

[Code]....

It turns out this is in the main.master page and it is used by the other pages that load fine. The ApplicationTitle variable is set right in the web.config file and like I said, it shows on the other pages.

My question is why would this code work fine for some pages and not two others? All of these admin pages are under a folder called Admin and the web.config file is in the root folder of the website. Its almost like these two pages cannot see the web.config file in the root folder? Why would that be if thats the case?

View 3 Replies

State Management :: PollLockedSessionCallback Error After Migrating To 2.0/ Object Reference Not Set To An Instance Of An Object

Aug 19, 2010

We have an applicaiton that was converted to the new framework using the wizard in Visual Studio 2008. When we install the applicaiton in production and change the iis settings to use the 2.0 framework we start to see these errors in the event viewer on the web servers. We are using SQL Server Session State and have 3 web servers in a load balancer. Object reference not set to an instance of an object.</Message><StackTrace> at System.Web.SessionState.SessionStateModule.PollLockedSessionCallback...

View 1 Replies

WCF / ASMX :: Server Was Unable To Process Request / Object Reference Not Set To An Instance Of An Object?

Apr 16, 2010

I have a webservice, it has few webmethods. when i create a client proxy and invoke the methods to check its response, i am getting this error. Can someone tell me what things can i check to know the cause of this? The error is not saying much hence blocked on this.

View 1 Replies

Data Controls :: GridView Row Editing DropDownList / Object Reference Not Set To Instance Of Object

Dec 22, 2013

 I am trying to implement the code URL...I have a database table with Integer type.Here is the running code line: Code in GridView:

<asp:TemplateField HeaderText="RegionNavn">
<ItemTemplate>
<%# Eval("RegionNavn")%>
</ItemTemplate>
<EditItemTemplate>
<asp:Label ID="lblRegionNavn" runat="server" Text='<%# Eval("RegionNavn")%>' Visible = "false"></asp:Label>

[code]...

On Edit Click, the DropDownList in the GridView brings the previously selected value.On Update Click, the error is: "System.FormatException: Input string was not in a correct format."

dCmd.Parameters.Add("@KystverketRegionID", SqlDbType.Int).Value = int.Parse(ddKystverketRegionID.SelectedValue);
 
When I use the following code:

ddlRegionNavn.DataTextField = "RegionNavn";
ddlRegionNavn.DataValueField = "RegionID"; // from RegionNavn to RegionID

On Edit Click, the DropDownList values in the GridView is not firing and the following error shows.Object reference not set to an instance of an object. How to implement the code when having a value of type Int ?

View 1 Replies

Web Forms :: Error When Converting Session To String / Object Reference Not Set To Instance Of Object

May 7, 2015

I am getting object refernce error at line:if (Session["Tax"].ToString() == "9")

protected void Page_Load(object sender, EventArgs e)
{
if (Session["Tax"].ToString() == "9")
{
lblTax.Text = Session["Tax"].ToString();
}
else
{
lblTax.Text = "0";
}
}

Is anything wrong I have done?

View 1 Replies

Data Controls :: Accessing DropDownList In GridView Row - Object Reference Not Set To Instance Of Object

May 30, 2013

I have this part in the Gridview.

<asp:TemplateField HeaderText="Student">
<ItemTemplate>
<asp:DropDownList ID="ddl" OnSelectedIndexChanged="ddl_IndexChanged" runat="server">
</asp:DropDownList>

[Code]....

After the change, when it is to bind data, I get this Exception message. Why?Object reference not set to an instance of an object.

View 1 Replies

Web Forms :: Returns Object Reference Not Set To An Instance Of The Object Because Of Empty Dataset

Aug 27, 2010

private void FillDetails(string pId, out string Name, out string Address)

[code]....

I have method called Filldetails(),This method uses stored procedure to retrieve information for product name and address based on productid passed from productdetails table.I am working on globalization project.We have this product information for US country but there is no product information for germany country.So dataset is empty for germany.As result I am getting error object reference not set to an instance of the object.

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved