Im returning the username from sharepoint site as a string. This is done successfully with the below code but I also get the domain with it. How can I only return the username and not the domain either through sharepoint or programmatically removing it? domain/username
[Code]....
I have a situation where I have to autheticate SharePoint user to another website that is not part of the sharepoint domain without asking user to login again.
I have sharepoint part of domain1. I have users in domain1 that log into sharepoint using NTLM by authenticating to domain1. I don't have any control over this domain and sharepoint configuration. I am working on a ASP.net application which needs to authenticate users from domain1 without prompting users for login if they have already logged into sharepoint server.
I may be able to install a webpart on the Sharepoint if this allows me to do single sign on between sharepoint and my application.
My intranet web application uses Forms Authentication. How do i get the Active directory domain nameusername of the logged in user. The IIS directory security settings for the app are:
Anonymous User Access : Ticked
Integrated Windows Authentication : Ticked
I tried using the following but to no avail
System.Security.Principal.WindowsIdentity.GetCurrent().Name ----> returns NT AUTHORITYNETWORK SERVICE
Request.LogonUserIdentity.Name -----> returns The username used for anonymous access
ineed to pass this information to an external application for the current user to gain access to the system. Can i untick Anonymous user access in IIS and continue using forms authentication? what are the other options.
I wish to obtain the domain SID from a user account that has been used to access my web page, but...
In some instances, you dont have access to the HttpContext object to call HttpContext.Current.Request.LogonUserIdentity.User.Value
All the static function is able to accept is a user-name as a string, and a domain-name as a string.
If the domain is left blank, it is amused that the user account name is within the same domain as the IIS server that the process is executing upon. :/
I have also installed SSL on a subdomain. I have put payment page under this sub domain.
View 4 RepliesI have an asp.net c# site that I have setup in IIS 7 and am loading into a sharepoint frame. Sharepoint doesn't prompt for domain credentials but my site does?In IIS I have enabled basic and windows authentication so I can get the domain users username, so if there is a way to get this without prompting that'd be a perfect solution for me.I am using the follwing statement to get username:
System.Web.
HttpContext.Current.User.Identity.Name
My feeling says it's not posible but anyway I am curious if there is at least a workaround for accomplish this.Basically I am working at my client site and my machine is not connected to the domain.What I want to do is running a web application locally under a domain account, and using the webdev server.The webapp uses the default authentication, windows authentication that is.I tried using impersonation with domainuser & password but I got the following error Could not create Windows user token from the credentials specified in the config file. Error from the operating system 'Logon failure: unknown user name or bad password.I have to mention that the username and the password are correct.
View 1 RepliesWe have a ASP.NET site that partially depends on forms authentication for login credentials, however the implementation of IPrincipal is completely custom.
But, when running the site on a particular server (which is somewhat semi-hardened when it comes to security), the app crashes when invoking IPrincipal.IsInRole() with the following messsage:
System.SystemException: The trust relationship between the primary domain and the trusted domain failed.
This indicates a communication error between the web-server and the DC, however since our application doesn't at all utilizes Windows authentication, I don't see why it needs to communicate with the DC.
This is my implementation:
[code]...
EDIT:
I was finally enable to reproduce this error on my dev-machine (i revoked my machine from the DC yesterday, but didn't reproduce it until today)
HttpContext.User is actually a WindowsPrincipal by default it seems, and the error in my code was that I only replace it with CustomPrincipal upon login. Hence, unathenticated users still get the WindowsPrincipal which then fails horribly if you have trust issues on your AD.
I tried changing the default principal by invoking this on appstart
AppDomain.CurrentDomain.SetPrincipalPolicy( PrincipalPolicy.NoPrincipal);
But this doesn't seem to kick in. How do I change the default Principal in ASP.NET?
I'm bangin' my head against the wall here. I'm not even sure what I want to do is possible.
I have developed an ASP.NET app that will only be run on my local network (which incorporates a Windows Domain). It's running on IIS 7.5.I want to do this:
[Code]....
My problem is this: If I don't turn off Anonymous Authentication and ASP.NET Impersonation, I don't get the results I'm looking for. (if Anonymous is allowed, I get an empty string returned for username, and if ASP.NET impersonation is allowed, then "username" is always whatever account is associated with impersonation, like "Network Service"). If I turn those off and then turn Windows Authentication on, it works, but only after a dialog box presents itself asking for the Windows Credentials.
What I'm trying to do is NOT require the users to log in. Since they've already logged into the domain when they signed on their computer, I'd like to just allow them access to the ASP.NET application I've written, and identify who they are (based on their previous Windows login) using the line of code above. I don't need them to re-authenticate, because they're already authenticated from their domain login.I can't figure out what I'm doing wrong, or how to accomplish this. It seems the closest I've gotten to what I want so far, is to turn off all authentication EXCEPT for Windows Authentication. It works then, but only if the user first types in his/her username and password again in a dialog box. Is there any way to avoid having them type in their username and password again, but still be able to identify their domain username?
My feeling says it's not posible but anyway I am curious if there is at least a workaround for accomplish this.Basically I am working at my client site and my machine is not connected to the domain.What I want to do is running a web application locally under a domain account, and using the webdev server.The webapp uses the default authentication, windows authentication that is.I tried using impersonation with domainuser & password but I got the following error Could not create Windows user token from the credentials specified in the config file. Error from the operating system 'Logon failure: unknown user name or bad password.I have to mention that the username and the password are correct.
View 2 RepliesI have two domain servers X and Y.My Asp.net Web application is hosted on Domain X.But my scope is required to authorize the user of Domain Y on the Web application hosted on Domain X server.I am using Windows Authetication mode in application
View 2 RepliesI have a main domain "mydomain.com" and then a sub domain "forums.mydomain.com". If a user visits "forums.mydomain.com" without being logged in, they are redirected to "mydomain.com/login.aspx".
The two scenarios are:
If they are redirected to the login page with "mydomain.com/login.aspx?ReturnUrl=http://forums.mydomain.com", then they are succesfully logged into the forums but NOT the main site.
If they are simply redirected to the login page with "mydomain.com/login.aspx" with no returnUrl, they are correctly logged into both the main site and the forums.
I've got a literal control to display the username of the user logged into our companies intranet system, originally I had a LoginName control but couldn't get strip to remove the domain from the username (as the format is domainnameusername) so I'm trying it this way.
[Code]....
protected void Page_Load(object sender, System.EventArgs e)
I have a domain: http://www.mydomain.com. This domain is redirected to http://mydomain.anotherDomain.com.
I user forms authorization, so when the user navigates to Default.aspx he is redirected to Login.aspx. Pretty standard stuff.
On FireFox the user can log in on both on http://www.mydomain.com and http://mydomain.anotherDomain.com.
But with Explorer http://www.mydomain.com doesn't work. I only get the Login.aspx page.
Can it have anything to do with that on http://www.mydomain.com I can't see the filename ('Default.aspx', 'Login.aspx')? How can I enable so the filename is included in the redirected domain?
I have an intranet web application. There are 2 user groups, group A belongs to the domain and group B does not. If I set the IIS to enable anonymous access, Request.ServerVariables("LOGON_USER") always return nothing. If I disable anonymous access and set Integrated Windows authenication, a Windows login prompt will come up if group B's users want to access the website.
How can I setup IIS so that when domain user access the website, it will direct to the main page with Session("user_name") = Request.ServerVariables("LOGON_USER"). If a user is not a domain user, the website will direct him/her to a login.aspx instead of having the Windows authenication prompt, then set Session("user_name") = txtUserName.Text, and finally redirect to the website main page ?
is it possible to remove Main Domain cookie from Sub Domain ?I am using single sign on .On logout i want to remove the maindomain cookie
View 2 RepliesWe have a website for our company on one domain and we have a login form to a webmail solution on another domain.Now i would like to build a form on our website the transfers the request to the login form on the webmail domain and automatically validate the user if user and pass are correct.Need help to find the correct way of doing this. The domains is hosted by our company, the website and webmail is on different servers. I don't want to use the querystring,
View 3 RepliesThe following code works as it was originally designed to move a file from one directory to another directory on the same server, but I need to change it to work so it will move a file from one server to another server. My challenge is how to define the source directory on a different server and check if file exists.
Code behind:
Protected Sub btnSubmit_Click(ByVal sender
As Object, ByVal e As System.EventArgs)
Handles btnSubmit.Click
[Code]....
How can I tell when the ASP.NET worker process last restarted?In ASP.NET, how can I tell when the app domain last recycled?
View 1 Repliescould i use the begin request of Global.asax to redirect everything, from mydomain. domain to www.mydomain.domain?
View 1 RepliesWe're doing a whitelabelled version of our site, which will be hosted at foo.ourdomain.com.
However we need to ensure session is maintained between www.ourdomain.com and foo.ourdomain.com, as our SSL certificate only covers the main domain.
In practice this means we'll swap to the main domain on our payment pages, which run HTTPS, and then redirect back to the subdomain, after payment.
So the question is: How do we maintain the session when doing so ?
I've tried with <httpCookies domain=".ourdomain.com" /> in web.config to no avail :-(
Edit: Figured it out now, I lacked domain on my <forms /> tag to handle login properly.
I've got an Search Engine Optimisation problem where users are able to access my site by specifying any sub-domain. This is causing duplicate page issues with SEO.For example if a user mis-types 'www' then posts a link on a forum, google is crawling 'wwww.domain.com'. Furthermore, google is also crawling 'domain.com'.I need a way of forcing the site to always redirect to 'www.domain.com' regardless of how the user accesses the site.
View 4 RepliesI am trying to achieve a SSO implimentation across my websites so i am using the machine key attribute to do so.now the trouble starts here as the website the user logs in is on the .net 1.1 framework and the website it it navigating to is .net 4.0.I have share the same machine-key across both the application . It works fine in my testing environment but as i move to the deployment server ,it just dosent work !So what i could do is read this article on MSDN :
http://msdn.microsoft.com/en-us/library/eb0zx8fc.aspx
this tells me to add a domin attribute like below
<forms loginUrl="~Login.aspx" defaultUrl="Default.aspx" protection="All" timeout="80" name=".ASPXAuth" domain="asbc.com"/>
but this thing just dosent work on the 1.1 application and throws an error Unrecognized attribute 'domain'.
Where do i get to mention the domin in my 1.1 application.?
i have 2 domain names namely www.test.com and www.testltd.com. Now i would like to redirect www.testltd.com to www.test.comwhats the best way to do this. and what impact it will have in search engines. I mean google is indexing both of them.
View 10 Replieswhat is doffrence between http://domain.com & http://www.domain.com where domain is the same name in both of this.e.g. http://mycompany.com & http://www.mycompany.comi
View 2 Replies