How can I setup some format for cells in some column in my DataTable or GridView ?I need to make some double columns rounded , for example :
3.564643 -> 3.56
3.546723 -> 3.55
6.654644 -> 6.65
DataFormatString ?where ?Question still active, I didn't solved the problem :-/
I'm looking for the best way (Performance) to do gridview columns formating RunTime /Dynamic depending on the datatable Columns type ,I want to bind the datatable to a gridview and format the Date columns to short date, and currency columns formatted with comma ex 10,000.00 inplace 100000.00 at datatable the column type is double run time (without converting them to String) since I do a filtering and sorting at these columns.
View 3 Replies<asp:TextBox runat="server" ID="TextBox3"/>
<asp:CalendarExtender runat="server" ID="TextBox3_CalendarExtender" TargetControlID="TextBox3"
Enabled="True" PopupPosition="BottomLeft" FirstDayOfWeek="Monday" />
output calendar Format : 2/1/2010
I need : 01.02.2010
like here : ajax calendar
how to setup this format ?..
How is it possible to change the displayed order of columns from a DataTable?
For example, dataTable "dt" contains two columns "a" and "b". I bind it to a GridView like this:
gridView.DataSource = dt;
gridView.DataBind();
But I'd like the GridView to display "b" first (leftmost).
Important point: I'm using this to export to Excel and there's no actual output to screen, using:
HtmlTextWriter htw = new HtmlTextWriter(sw);
gridView.RenderControl(htw);
Actually i want that HeaderText of gridview should be as column name of datatable, which i assign to that perticular column of gridview.
I have templatefield in that column and AutoGeneratedColumn is false
I have a Gridview with autogeneratecolumn = yes since the datasource always returns different columns of data.
However, except from left most column, all columns to the right should be formated to #,###.#
How could I format these columns to the right dynamically ?
how to copy only the columns in a DataTable to another DataTable?
View 2 RepliesI have a datatable with 17 columns and a bunch of data. I wnat a datatable with only 6 of the columns and the data for those 6 columns. So I need a subset of the original datatable. How do I loop through the original datatable with 17 columns and end up with a datatable with only the 6 columns I want with the corresponding data for those 6 columns?
View 4 RepliesI am getting this error whilie bulding project. i simply has defined a datatable accessing its rows and columns. don't knw why it says Columns is not a member of 'DataTable.
Error 66 'Columns' is not a member of 'DataTable'. E:DOI1TableReports.aspx.vb 342
Error 65 'Rows' is not a member of 'DataTable'. E:DOI1TableReports.aspx.vb 297
Error 73 'NewRow' is not a member of 'DataTable'. E:DOI1TableReports.aspx.vb 410
i want to make a datagrid with 2 columns and many rows the columns i want to have databinding with a datatable
i want the 1 row 1 column of datagrid have data from 1 row of datatable
i want the 1 row 2 column of datagrid have data from 2 row of datatable
i want the 2 row 1 column of datagrid have data from 3 row of datatable
i want the 2 row 2 column of datagrid have data from 4 row of datatable
......
......
i use something like this
[code]...
but i have two times the same in tha datagrid left and right
Im trying to retrieve a datatable that I put into a session variable, however when i do it apears that there are no columns... I have done this before in VB.NET, I'n now using C#, and it worked perfectly, and as far as i can see there is no change in the code other than the obvious syntax changes.
EDIT: The dt (in part 2) variable has the right data when i look in the data visulization window, but i have noticed that the other properties associated with a datatable are abscent. When i hover over a normal looking datatable with my mouse it looks like the following: " dt ----- {System.Data.DataTable}" but in the class im working on it just looks like "dt ----- {}". Also, after I return the session variable into the dt I clone it (dtclone = dt.clone(); ) and the clone is empty in the data visulizer.... what on earth!
EDIT 2: I have now also tried converting the first datatable to a dataset, putting this in the session variable, and recoverting it back to a datatable in the class. Am starting to wonder if it is a probelm with: dt.Load(sqlReader); The data does appear after this step though in the dataset visualiser, but not after being cloned. Code below.
1) SQL command in a webhandler, the results of which populate the datatable to be put into the session variable.
DataTable dt = new DataTable();
SqlDataReader sqlReader= default(SqlDataReader);
SqlDataAdapter sqlAdapter = new SqlDataAdapter();
sqlReader = storedProc.ExecuteReader(CommandBehavior.CloseConnection);
dt.Load(sqlReader);
System.Web.HttpContext.Current.Session["ResultsTable"] = dt;
2) Part of the code in a class which performs calculations on the table:
DataTable dt = (DataTable)HttpContext.Current.Session["ResultsTable"];
I want to add and remove columns on specific conditions. how it's possible.
Alert: Add and remove not Hide and show...
I have a DataTable that was built from dynamically created SQL, so I do not know the number of columns in the datatable.
How can I convert this datatable into an IList?
EDIT: I am then going to use this to send to a Telerik Grid on the page.
This is datat table format :
TagName Timestamp Value
Tag1 21-2-2011 12
Tag1 22-2-2011 1
Tag2 21-2-2011 13
I want in this Format
TimeStamp Tag1 Tag2
21-2-2011 12 13
22-2-2011 1 0
I would like to bind 'Id', 'Name' and 'Email' from DataTable to RadComboBox. It's possible with ItemTemplate. But I don't want to display 'Email' column in the RadComboBox. I want display 'Email' in the label when the selectedIndexChanged. Is this possible?
View 1 RepliesI've built a User Control that contains a ListView. To make it work I need to pass to it a DataTable. The columns of this DataTable need to have particular names that match up with what the ListView is expecting. I have a large DataTable that I need to massage/convert over to this different format. To do that I need to filter out columns and rename the column names. The actual data in the DataTable doesn't need to change. Is there a good way to do this without actually instantiating a new DataTable and copying the data from the large DataTable into it?
View 14 RepliesHOW TO specify which columns are in a DataView from a DataTable. I want to create a DataView, that only has the columns from a DataTable that I choose, and in the order I want.
Example:
// DataTable_MyTable ~~ Column #0 is for ID. I do not want my view to get this column.
// DataTable_MyTable ~~ Column #1 is for TYPE. I want this column to come in 2nd place in my view.
// DataTable_MyTable ~~ Column #2 is for NAME. I want this column to com in 1st place in my view.
DataView DataView_MyView = new DataView(DataTable_MyTable ~~ some how only get the columns I want, and in the order I want ~~);
// DataView_MyView now has only 2 columns.
// DataView_MyView ~~ Column #0 is NAME.
// DataView_MyView ~~ Column #1 is TYPE.
I would like to select some columns from a Datatable, I mean, something like Select Name, Surname, ID,
I'm trying to do something like this:
DataTable dtExcel = new DataTable();
DataRow[] buena = dtExcel.Select("NAME");
in order to get only a view or table with one column (NAME).
how to join two datatable datas into one datatable to show in one gridview
i.e in 1 datatable i have username and pwd and in another datatable i have that user details. how to show all these in one datatable to get those values display in gridview(asp.net)
[Code]....
Refer to datatable columns with database column names?
How can I get common columns from two intersecting datatable inside dataset?
View 2 RepliesI am using a datatable with different columns. Datatype of each column is Double. Now I want to format that column to Indian positioning number system. e.g(54,36,54,656.00). How can I do this???
View 1 RepliesI have a GridView that has several dynamic columns (I do not know how many at design time and it could be 0-12 columns, hence need for dynamic columns). I have the columns in the grid and data bound to them - works great. There are other standard, design-time TemplateField columns with TextBox controls in them. These are bound with values that the user can edit. The grid is posted back via a Submit button. My question is "Why does gv.Columns.Insert() cause all my TextBox data to be null on Postback, but gv.Columns.Add() works like a champ?"
protected void BuildColumns()
{
// The first column to begin to insert the columns in the GridView
int columnIndex = 5;
BoundField aoColumn = new BoundField();
aoColumn.HeaderText = "New Column 1";
gvMyGrid.Columns.Insert(columnIndex, aoColumn); // kills txtQuantity.Text on postback
gvMyGrid.Columns.Add(aoColumn); // works fine
columnIndex++;
foreach (MyEntity my in _myEntityCollection)
{
BoundField myColumn = new BoundField();
myColumn.HeaderText = String.Format("{0:d}", my.StartDate);
gvMyGrid.Columns.Insert(columnIndex, myColumn);
columnIndex++;
}
}
I then go on to assign values to these BoundFields in the _RowDataBound method and all of this works great. However, when I post back and try to reference some TextBox and they are all null. And yes, I have the BuildColumns() call wrapped in if (!IsPostBack) on Page_Load. Of course I would like to use .Insert() so that the columns can go in the proper location and not at the end of the Columns array.
in asp.net page user able to select gridview Columns, and it will hide remaining columns and that selection done by check box with column list bellow is Image link , what exactly I am looking for [URL] it look bellow after selection of column done [URL]
View 1 RepliesI'm using the Autocomplete extender, it works great however I need to be able to display multiple columns from my stored procedure as have in the example below. The user enters a location #, I need it to display the location number and the address formatted, but when the user selects the correct location, I ONLY want the location number to populate my textbox:
1234
Address
City, State Zip
I've had a real hard time trying to figure out how to do this,. Here's my stored procedure and CS code.
[Code]....
Here's my CS:
[Code]....
