How To Get A Listbox To Update After The Add Method Is Called
Mar 10, 2010
I am having a problem with getting a listbox to update after the add method is called. I am using an AsyncFileUpload control and as part of the AsyncFileUpload1_UploadedComplete I am creating a listItem and then adding that to the listbox. The item will not appear in the listbox. I have tried putting the listbox in an update panel and then calling the Update method on the panel from within the AsyncFileUpload1_UploadedComplete procedure and that too fails to update the listbox. I can call the Update method on the panel from a separate procedure and still the listbox will not update with the item added in the AsyncFileUpload1_UploadedComplete method.
I am creating an Asp.net web site which will support dynamic data. When I am creating a dynamic web site from Scratch (from template in VS) all is working fine. But when I am trying to add dynamic entity (.edmx) file and running the application I am getting following error
"The method 'Skip' is only supported for sorted input in LINQ to Entities. The method 'OrderBy' must be called before the method 'Skip'. "
I am designing a program that will let me enter the name of an item to swap and adds the swap to an array list when a button Add is pressed. Once the item is added to the array list a Sub Procedure should be called which displays the contents of the array list in a list box.
The system will also allow me to remove items from the array list using a Remove button
followed by updating array list.
I have done some part which puts item into the listbox1 which i named lstSwapList.I would need some assistance on the Sub Procedure to display the Value or Description on the other listbox2 which i have also named lstContent,if a value is selected from the listbox1.
I would also want to know how to update the Listbox content,However i hv added a sample of the way i guess it may be.
Any complete solution from anybody on the Sub Procedure and the Update Swap procedure will be greately appreciated.
The script below is what i have done so far.
Partial Class _Default Inherits System.Web.UI.Page Protected Sub lstContent_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles lstContent.SelectedIndexChanged End Sub Protected Sub lstSwapList_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles lstSwapList.SelectedIndexChanged End Sub Protected Sub btnAddSwap_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnAddSwap.Click Dim SwapValue As String = "Sixty Pounds" Dim Counter As Integer = 8 Dim SwapN0 As Integer lstSwapList.Items.Add(SwapValue) lstSwapList.Items.Add(Counter) lstSwapList.Items.Add(New ListItem("300", "1")) lstSwapList.Items.Add(New ListItem("ASP.Net", "2")) lstSwapList.Items.Add(New ListItem("Programming", "3")) SwapN0 = lstSwapList.SelectedValue For Counter = 0 To -1 SwapN0 = lstContent.Items.Count Next End Sub Protected Sub btnDeleteSwap_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnDeleteSwap.Click lstSwapList.Items.Remove(lstSwapList.SelectedValue) End Sub Protected Sub btnUpdateSwap_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnUpdateSwap.Click End Sub End Class
======================================= Sub UpdateSwap(ByVal valueA As String, ByVal ValueBAs String, ByVal ValueC As Integer, ByVal ValueD As Date)
I can't understand why the method LoadViewState() is not called after the postback in my code below.After label1 cahnges its text the "__VIEWSTATE" hidden field is modified, but LoadViewState() is not called.
I have a controller method that returns a jSON object and in one calling situation, it works and in another calling situation, it does not work. When the URL in my browser is this:
http://localhost:65247/Client -- it works.
But, when my url looks like this:
http://localhost:65247/Client/UserAdmin?id=6 -- it DOES NOT work
In a nutshell, clients have users. From within the client, I wish to work on a specific user (this is the UserAdmin view). In this case, the client id is 6. From within the UserAdmin view that was launched with Id=6, I then wish to select a user from a dropdown. The idea was to use javascript and $.getJSON to fetch data for the specific user so as not to have to refresh the entire page. I use this approach in other parts of the app. The only difference I can see is with the URL in the browser. It would appear the presence of parameters via the '?' is futzing things up a bit.
I'm overriding the Controller.Initialize method to set some stuff before each ActionResult is executed, however I'm finding that the method is being called multiple times for each request (anywhere between 2 - 10 times). I'm running in Cassini.
My hunch is that it is running for all static files (images, css etc) as well as the requested action - although I may be wrong? I thought maybe something was wrong in my web.config but it all looks right to me.
In one view (view1) there is a text box and a button beside it. i click on that button, i am popping another view (Create view) as a seperate window. in create view i am entering some values and creating a record in db. out of these values one value i have to send back to "View1". how can i send this value? i am opening view2 from view1 like
View2 contains some fields like Name,Email etc... and I click "Create" to call HTTPPOST. there i add the values to db including a generated guid. i want to send this ID to view1.
I'm rewriting a Web Forms application as an exercise to learn some MVC skills.I have a number of LinkButtons on the original application which postback and raise a serverside event that rebinds data to a datagrid.
<%= Html.ActionLink("CurrentYr", "Index", 0)%> <%= Html.ActionLink("1", "Index", 1)%> and
public ActionResult Index() { return View(MietController.GetMietByYearOffset(0);
[code]... As the ActionLink renders an tag it doesn't postback so my overloaded Index() method isn't called. What are my options for doing this in MVC?
I want to use a function in the code file of ASP.NET such that everytime the function is called, its value increases by 1.I thought of a way but it didn't fully work out. I created a class for this and used a static variable in that but the lifetime of static variable in asp.net is till the time the app does not close.
How code a time delay before the next method is called? I have the following but I don't think it's waiting 10 seconds before calling CallMethod(). Thread.Sleep(10000); CallMethod();
As we know when IIS receives the first request for a particular Asp.net application resource, IIS creates an instance of a HttpApplication (defined in global.asax codebehind).When this new instance is created it's initialization happens that also checks all configured HTTP modules.All modules are then instantiated and put in the application's Modules collection (of type HttpModuleCollection)modules are looped through and their Init() method is called (when they register for request events)
As far as I understand it the above scenario happens when a web application is started/initialized (hence application start event).What happens with modules?
Are they (re)instatiated on each request or reused from the Modules property on each consecutive request while the web application is alive? As I understand IIS and Asp.net they are reused through the whole life of a web application.
If they are reused, can we assume that their Init() method is actually a pseudo event handler for application start event? The thing is we can't attach to application level events within http modules. But if they are being reused we could use Init() as application start event and do whatever we'd put in global.asax instead.
Question,Can we assume that module's Init() method is called only on application start event? Could we use this assumption to i.e. register routes for applications whose global.asax codebehind we can't change? web.config is usually accessible and we can change it the way we want.Would this actually work?
Additional info,We can check HttpApplication code and check its InitModulesCommon() method. This one actually calls Init() of each registered HTTP module. What is more interesting is that this method is only used by InitIntegratedModules() and InitModules() methods. Which are both used only in HttpApplication.InitInternal() method. This is the basis of my assumptions, but I would like to know whether someone has abused IHttpModule.Init() for application start event.
I want to unit test my rendering engine for an ASP.NET app. I have some custom controls created in that app. Most of those control rely on having CreateChildControls() method called by the ASP.Net engine wheather during initial call or a postback.When running a test CreateChildControls() does not get called and the control is in an "invalid" state.
As a workaround to get the tests going I explicitly call some other public method that calls EnsureChildControls() in it. This in effect causes CreateChildControls() to be executed and the control being initialized properly (just as it would normally when hosted on web server). I would like to get rid of that extra method call and the control to still be in a proper state for testing.
l Im downloading Pdfs using WebClient I used below code
try { WebClient wc = new WebClient(); Uri uriadd = new Uri(@"ftp://xxx.yyy..../httpdocs/FH/Foldername/" + clientorder1[i].Cloi_id + ".pdf"); wc.Credentials = new NetworkCredential("xxxx", "zzzz"); }
Its working fine but some times Gives Error like Object synchronization method was called from an unsynchronized block of code.. Why this Error coming ....
I have an ObjectDataSource that I want to perform updates using a business entity i.e. Type="Object"). Since the values for the entity are within a user control, I have stored a reference to the control in Session and in the updating event, set the new instance to the value of the entity from the user contol property (which also pulls values from the form viaother properties of the control):
Protected Sub MasterDataSource_Updating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.ObjectDataSourceMethodEventArgs) Handles MasterDataSource.Updating Dim entity As New Login() Dim accountControl As AccountInfo = TryCast(Session("AccountCtrl"), AccountInfo) entity = accountControl.Entity e.InputParameters.Add("entity", entity) End Sub
My question is, how can I get the update method to pass this entity to the update method in my BLL class? It seems the Update method requires an ID or reference to the original object to use in determining whether any changes have taken place, but I don't really want to do this. In other words, I just want to use the Update event on my ObjectDataSource to pass my entity to the method ("Update") I set as a property and then let this business method handle the update of the data. Shown below, is the BLL update method I want to call:
Public Overloads Function Update(ByVal entity As Login) If entity Is Nothing Then Throw New ArgumentNullException("entity") End If MyBase.Update("UpdateLogin", entity.Username, entity.Password, entity.FirstName, entity.LastName, entity.Role, entity.Region, _ entity.Email, entity.Title, entity.TierID, entity.Street, entity.City, entity.State, entity.Zip, entity.Mobile, entity.Phone, entity.Fax) End Function
When I try to call this as it stands now, I get an error: ObjectDataSource 'MasterDataSource' could not find a non-generic method 'Update' that has parameters: ID, entity. Previously, I'd set up a long list of parameters of basic data types (string, int, boolean), but this is rather cumbersome and I was hoping to use an entity for this (FYI, I also got the same type of error when I tried this approach, but with the ID as the last parameter in the list). Perhaps what I'm doing here is atypical to how the ODS is normally used?? Has anyone done something like this successfully?
I couldn't come up with a good subject. I have a simple ASP.NET 3.5 form. If you follow the numbered comments, I explain how I am stepping through the code when I run the page in debug mode. Both of the below functions are methods declared in the code behind file of the page, both are in the same _Default class. The ManagersListBox is declared in the Default.aspx page. Why is it that in the context of the GetSubordinates, the ManagersListBox is null? It's as if it disappears for a moment and then reappears after returning from the GetSubordinates method. Obviously the solution is to parameterize GetSuborindates, but that is not my concern. I am trying to learn how ASP.NET works and I would really like to understand why I am seeing this behavior "disappearing object".
I have a table with columns songID, Album, Artist and title. I have created a method called Updatesong() in data access layer. The SQL qerry in UpdateSong() method is
UPDATE Music SET Title = @Title, Album = @Album, Artist = @Artist
WHERE (Title = @Title)
In a web page I have called the UpdateSong metod on a button click as
Whatever I'm changing in the textbox are getting updated except title column. I dont no whats wrong in that. If I change the SQL querry in tableadapter as
UPDATE Music SET Title = @Title, Album = @Album, Artist = @Artist
WHERE (SongID = @Original_SongID)
I get an error saying "No overload for method 'UpdateSong' takes '10' arguments".
In my project asp.net (c#), I am using threading to process some messages. I have a display page that contain a listbox with all the actions that are taken in processing the message. And a class where I am processing the message.
Default.aspx:
protected void Page_Load(object sender, EventArgs e) { //starts the thread and call the method from Process.cs }
[Code]....
But the listbox do not show nothing. Does anyone has any ideea where I'm wrong?
In my application, I have a list box(list of stores), Add and Remove buttons and another list box (selected stores).
I have Following requirements:
1. On click of Add button, copy selected items from the master stores list to the selected store list and clear the selection from master store list.
2. On Click of Remove button, remove the selected stores from the selected stores list.
I have added my master store list box and selected store list boxes to 2 different update panels and added triggers for each of the update panel. Things are working fine but one thing I have observed that it is taking unusually long to move selected stores from master list to selected list. I have around 5000 entries in the master list of stores.
If I remove the update panel for master store list, things are normal but I am not able to clear the selection. Am I doing something wrong? Is there a way to clear selection of listbox outside the update panel.
In ASP.NET I have a dropdown with some items in it, I have a button and a textbox. I am subscribed to the SelectedIndexChanged event of the dropdown where I pass the new selected index of the dropdown to a struct that converts it's index (via enum) to a string. That string is then gotten through a property in a class to put into the textbox.
[Code]....
Now the problem I have is that, when you click it (the button) the first time, the action get's updated with the current action selected in the listbox, but then when you click the button again WITHOUT changing anything in the listbox, the textbox shows the zero'th item in the textbox, (seems to reset), although it actually hasn't changed at all.
I'm guessing this might have something to do with the postback caused by the button click, which resets the state of the global or something, but I'm not sure. Why is it being reset while the dropdown box is still as I set it the first time?
