I have a links of pages that I want to show them in one page.So My question is how I can show more than one web page in one web page like to create webpage using IframBut I want that with ajax or javascript so the user didn'tfeel that.Solutions must be without using Ifram ;)
View 2 Repliesi am trying to load a dynamic iframe but it cannot visualize the page.
this is my html code:
[Code]....
and this is my codebehind:
[Code]....
i am using a content update panel on the page but the div of the iframe is out of the content panel.
I put an iframe in one page. above the ifame I put a menu. When user clicks on menu, appropriate pages are loaded in frame, it works.
But also I need by default one page to be loaded in iframe.
[Code]....
but when the page is loaded initially it can't find - src="~/HTMLpages/Information.htm".
[Code]....
I tried to remove src="" in definition and put it in Page_load
[Code]....
no effect.
I am using a third party gateway. The third party gateway does not support query-string , so i will need to post the form to pass the values to the given URL and another thing is that they don't expose the web-services so we need to use their page and that means we need to host it in an iframe in asp.net
so what i did is that i have hidden fields that will be used as parameters as depicted below
Code:
<input type="hidden" name="p1" value='4635' />
<input type="hidden" name="p2" value='Reference_test' />
<input type="hidden" name="p3" value='Purchase credits' />
[Code]..
Now the purpose of this , is to load the iframe after the page load event of the asp.net gets fired.
Now my problem here is that when the iframe loads , it does not pass the parameters to the url that is being set in the iframe.
I have attached the example, project. (2kb)
When you run the project you will notice when the iframe loads there is an Error
"NO VCS ID"
now this means that the parameters were not passed when the Iframe loads , i can understand because it seems like iframe does not do a full form post. so to demonstrate what i want, click the proceed button and you will notice it will give you a page with no errors and it will be a page where credit card details are required , i want to iframe to load that the first time.
I have the following setup:
-Default.aspx
-Page1.aspx
-Page2.aspx
Default.aspx contains an iFrame, called "frame1"
Upon the loading of Default.aspx, Page1.aspx gets loaded into the iFrame.
Page1 contains a button, (lets just say Button1).
If I click Button1 (so from the page loaded in the iFrame), I want Page2.aspx to be loaded in the place of Default.aspx.
So I would need to get the same effect as Response.Redirect("Page2.aspx")
But if I do this Page2 will be loaded inside the iFrame, I need it to load outside the iFrame (so Default.aspx gets replaced by Page2.aspx)...
Is possible to do that?
View 1 RepliesI have a data driven asp.net website with frames on the top, left, right and center screen. If a page generates an error on any of the frames, I want to redirect the whole site back to the Default.aspx. Currently, when a frame page errors in one of the frames, that frame gets the error pages. Site is URL.... Is this something that can be handled?
View 1 RepliesI hv Declared two Master page one Is Base and Derived.. Base Page Load is working but when i hv written load controls in Derived Page Load Using C# it's not working..
View 3 Replieshow Triggering an event in the Parent Page from within Page inside IFRAME?
how to access the Parent Page from within Page inside IFRAME?
when i try to create an Iframe using :
[code]....
the page is not showing in the main page just shows pdf reader loading then nothing happens. Even when i try to load another page which of type aspx same case its not being showed in the main page only windows authenticating box appears then page sleeps
however when i create the iframe using the page markup its being correct for both cases.
I have a Parent Page that includes an iframe containing html page with many field. The parent page contains the "Save" button. Now i want to get the values of iframe page while submitting the parent page. How can i access the iframe pages fields in parent page submit?
View 2 RepliesI have a webform named Default.aspx and in it an iFrame...
The iFrame will load one of a few different pages/forms/aspx... (for this example lets just say its test.aspx)
On test.aspx I have 2 buttons Button1 and Button2 If I have code in my test.aspx.vb for Button1 click of:
button2.text = "hello world"
it looks as if it reloads test.aspx inside the iFrame and sure enough Button2 states "hello world"
So now lets say on the Default.aspx I also have a button and its named Button5.
How would I go about updating the Button5.Text from with in the vb code of Button1 click/vb code located on Test.aspx
I have looked over some other post [URL] and the tell of using "PreviousPage" but that not seam to be what I need, I want to be able to state the page/form I want to effect a control on it...
I know how to do this in jut standard VB.net (not web) its like:
FromName.ControleName.Text = "Hello World" but then again in VB.net windows apps you dont have Iframse to deal with...
I have a default.aspx page with an iFrame that displays another "main.aspx" page.
The main.aspx page has some buttons and other controls .. and some events associated to page load and so on .. When i open main.aspx in a browser, evrthg works perfect .. but when i open up defaults.aspx , evrthg loads correctly, but if i click on any button inside "main.aspx" , nthg happens .. and none of the events is triggered ..
In order to use a third party API, I had to create a page that does not have form runat="server" in it. Because my app is using MasterPages and have a consistent look and feel throughout the application, though not too thrilled w/ the solution, I had to use iframe to embed this page into my app.It works fine but here's what I want to do. When the API call succeeds, I display a message and want to also place a hyperlink to send the user back to their home page. I think you see what I'm getting at by now. If I do this and the user clicks the link, it's all happening within the iframe.How do I send the user back to his home page and affect the whole page and not just the iframe page?
View 3 Repliesi open a iframe in a page, from that page opend in iframe, i want the page url.means one page mainpage.aspx have a iframe, that iframe open open a iframepage.aspx page.from the iframepage.aspx page's button click event i want to referesh the mainpage.aspx page.how can i do.
I have an aspx page (Unscheduled.aspx) that contains a IFrame (frmSpares). The IFrame contains a further aspx page (SparesConfirmation2.aspx) which has a Save Method in it's code behind module. This page is loaded into the IFram at run time as follows:-
Code:
Dim link As String
link = "SparesConfirmation2.aspx?JobID=" & JobID
Dim strscript As String = "<script language = javascript>"
strscript &= "LoadIFRAME( """ & link & """)"
strscript &= "</script>"
ClientScript.RegisterStartupScript(Me.GetType(), "clientscript", strscript)
Unscheduled.aspx has a save button on it. When the Save button is pressed I want to save the content of the main page and then call the save method on SparesConfirmation.aspx.This is VS2005 using VB.Net for the code behind.
As a thought, there's no good reason for the Save code to be in SparesConfirmation2 (apart from a general principle of High Coherence). I've also tried getting the data back into the main page and doing the saving there but I can't seem to access that either.
How can i refresh(Asych) the contents of my Datalist on the parent page from a data change in a page that is displayed in an iFrame on the parent page.
I have movie names with image in the data list that is on parent page.
there another page is openend in the parent pages in an iFrame control.
in that sub page i upload image and other data related to a new movie.
What i want is that when i submit that information in an iFrame page, the DataList should update(Asych) itself on the parent page showing new updated info.
the structure is like;
[code]...
I want to call a javascript method during page load. I am using application.master of the sharepoint server 2007 as the master page . In the content page i want to call a custom method named OnLoadFun() during loading the content page. I have written the function inside script tag in the PlaceHolderAdditionalPageHead id section of the content page.
[Code]....
How do i call the OnLoadFun method so the i is being called onload time. i tried putting window.onload=OnLoadFun surrounded by script tag within the PlaceHolderMain content section.
I have a web page which has about 11 gridviews.Hence the page takes bout 15 seconds to load.The grids are 1 below the other.They are populated at the page load.
I need a solution to reduce page load time. Is there a way,where the gridview loads only if user scrolls to it. I donot want the user to make selection for everytime he wishes to see a gridview. The page should show gridview if its data is bound to it, not waiting for entire page gridviews to get populated.
I have the selected DataKey in session from the ListView. I am able to set the selection back when I comeback to this aspx page containing listview. But when the selected item in the listview belongs to some other page (not the first listview page) then I need to also set the selected listview page to the one, where my item belongs. I use a listview and a datapager (with template paging) How can I find, in which page my item to be selected exists?
View 1 RepliesIn my web form, i have 2 drop downlist controls. eg. dropdown1 and dropdown2. I will change the dropdownlist1 item, consequently selectedindexchanged event fires and reloads the dropdownlist2 items. And i have another button also in order to get the result based on the dropdown1 and dropdown2. Lets say for example, i have a list of countries in dropdown1 and a list of states in dropdown2. I selected "India" in dropdown1 and correspondingly "Tamilnadu" in dropdown2. And then click a button which calls the dataset based on dropdown1 and dropdown2. The problem i face here is, whenever i click on the button to load the dataset, dropdown1 value remains the same as the dataset is not called again, whereas the dropdown2 value changes to the first one as it gets called automatically during postback. For your information, I have loaded both the lists in the page load using (!IsPostback) property.
My coding is as follows:
protected void Page_Load(object sender, EventArgs e)
{
try
{
if (Session["sesUserName"] == null)
{
Response.Redirect("sessionExpr.aspx", false);
}
else
{
lblStatus.Visible = false;
pnlEvaluate.Visible = false;
if (!IsPostBack)
{
fnLoadDropDown1();
fnLoadDropdown2();
}
}
}
catch (Exception ex)
{
throw ex;
}
}
public void fnLoadDropDown1()
{
dsLoadDD1 = objWebRef.fnLoadOnlineTest();
if (dsLoadDD1.Tables[0].Rows.Count > 0)
{
ddTestTitle.DataTextField = "vchTestTitle";
ddTestTitle.DataValueField = "intTestID";
ddTestTitle.DataSource = dsLoadDD1.Tables[0];
ddTestTitle.DataBind();
}
}
public void fnLoadDropDown2()
{
dsLoadDD2 = objWebRef.fnLoadOnlineTest();
if (dsLoadDD2.Tables[0].Rows.Count > 0)
{
ddUser.DataTextField = "vchUser";
ddUser.DataValueField = "intUserID";
ddUser.DataSource = dsLoadDD2.Tables[0];
ddUser.DataBind();
}
}
protected void ddTestTitle_SelectedIndexChanged(object sender, EventArgs e) ...................
I'm working on a wizard-like set of page, and I'm relying on cross page postbacks to navigate between them.
I need to be able to trigger the Load event on the previous page in order to save the form data for the page.
I've been told that for situations of this sort all I had to do is access the PreviousPage property in the destination page and this would trigger the load event of the previous page but for some reason this doesn't seem to be working.
Is there anything else I can do to explicitly trigger the load event on the previouspage if the PreviousPage property is not null?
On page load is there a way to enumerate all the nest user controls for that specific page load?
I'd like to be able to enumerate all the user controls that implement an interface, and call the interface method for the controls before asp.net passes control to thier page_load events.
The problem is from the master page level, any page in the app could be loading, and each of them could have any random user control, and I need the type reference to determine if they implement the interface, and to call the method.
Is there a way to jump over the last page of a listview whenever the pageloads
View 2 RepliesI'm trying to get a link to load a new page that passes a value to the new page. To my dismay I've found out (or im doing it wrong) that this doesn't work in the repeater.
[Code]....
How would i get something like that to work in my repeater so it can show a new News page with more information on it.