I have used ajaxtool kit's autocomplete on a page which gets data from a webservice. This autocomplete is slow, at the time I only have 10 to 20 records in table and it take about 3 to 5 seconds to search and show result in autocomplete. User have to wait about 4 second on average to see data.
View 1 Replies
I used the AjaxToolkit AutoComplete today. It works fine. But what I hate is that I have to use the "CompletionSetCount" at 5 or 6 only so it doesn't reach the following textbox on my form.
The problem is that the dropdownlist of the AutoComplexeExtender gets under my textboxes, so it hides some items of the list.
When I try to play with the z-order of the "CompletionListCssClass" or "CompletionListItemCssClass", then the list appearance is all messed up
I have used CKEditor in my ASP.NET pages. But after than, that pages are very slow. Is it possible that it is caused by CKEditor?
View 1 RepliesI have made an asp.net web application using VS 2008 to show crystal reports. I have used CrystalReportViewer control to show reports.
The table (sql server 2005 ) from which I have to fetch data has approximately 400000 records. I connect to it using OLEDB ( Microsoft OLEDB provider for sql server )
I have wrote the following code to achieve this :
[code]....
I have crystal report in asp.net 2.0 C# application..
It took me lot of time to show report at first time..
How to make fast to show report in some 10 sec or below..
I have three views inside a Multiview How to activate one by one view means I Just want to change the Active View Index of the Multiview using javascript in ClientSide How can i do this?
View 1 RepliesWhen I run my piece of SQL through SQL developer it takes less than half a second with an overall cost of 618 on the explain plan.
When I run the same SQL through .NET via the oracle.dataaccess.client connection it is impossibly slow taking over 5 minutes to run.
What could be causing this and what can I do?
I make a panel rund corner using Ajaxtoolkit roundcorner. It works fine Now I use CSS file with this panel but roun corner do not work. Is it possible make Ajaxtoolkit working with CSS?
View 12 RepliesHow do I make an autocomplete TextBox in C# that bind to a data source?
View 3 RepliesI have a user control which encapsulates a NumericUpDownExtender. This UserControl implements the interface ICallbackEventHandler, because I want that when a user changes the value of the textbox associated a custom event to be raised in the server. By the other hand each time an async postback is done I shoe a message of loading and disable the whole screen. This works perfect when something is changed in for example an UpdatePanel through this lines of code:
Sys.WebForms.PageRequestManager.getInstance().add_beginRequest(
function (sender, args) {
var modalPopupBehavior = $find('programmaticSavingLoadingModalPopupBehavior');
modalPopupBehavior.show();
}
);
The UserControl is placed inside a detailsview which is inside an UpdatePanel in an aspx. When the custom event is raised I want another textbox in the aspx to change its value. So far, When I click on the UpDownExtender, it goes correctly to the server and raises the custom event, and the new value of the textbox is assigned in the server. but it is not changed in the browser.
I suspect that the problem is the callback, since I have the same architecture for a UserControl with an AutoCompleteExtender which implement IPostbackEventHandler and it works. Any clues how can I solve this here to make the UpDownNumericExtender user control to work like the AutComplete one? This is the code of the user control and the parent:
using System;
using System.Web.UI;
using System.ComponentModel;
using System.Text;
namespace Corp.UserControls
{
[Themeable(true)]
public partial class CustomNumericUpDown : CorpNumericUpDown, ICallbackEventHandler
{
protected void Page_PreRender(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
currentInstanceNumber = CorpAjaxControlToolkitUserControl.getNextInstanceNumber();
}
registerControl(this.HFNumericUpDown.ClientID, currentInstanceNumber);
string strCallServer = "NumericUpDownCallServer" + currentInstanceNumber.ToString();
// If this function is not written the callback to get the disponibilidadCliente doesn't work
if (!Page.ClientScript.IsClientScriptBlockRegistered("ReceiveServerDataNumericUpDown"))
{
StringBuilder str = new StringBuilder();
str.Append("function ReceiveServerDataNumericUpDown(arg, context) {}").AppendLine();
Page.ClientScript.RegisterClientScriptBlock(typeof(CorpNumericUpDown),
"ReceiveServerDataNumericUpDown", str.ToString(), true);
}
nudeNumericUpDownExtender.BehaviorID = "NumericUpDownEx" + currentInstanceNumber.ToString();
ClientScriptManager cm = Page.ClientScript;
String cbReference = cm.GetCallbackEventReference(this, "arg", "ReceiveServerDataNumericUpDown", "");
String callbackScript = "function " + strCallServer + "(arg, context)" + Environment.NewLine + "{" + Environment.NewLine + cbReference + ";" + Environment.NewLine + "}" + Environment.NewLine;
cm.RegisterClientScriptBlock(typeof(CustomNumericUpDown), strCallServer, callbackScript, true);
base.Page_PreRender(sender,e);
}
[System.ComponentModel.Browsable(true)]
[System.ComponentModel.Bindable(true)]
public Int64 Value
{
get { return (string.IsNullOrEmpty(HFNumericUpDown.Value) ? Int64.Parse("1") : Int64.Parse(HFNumericUpDown.Value)); }
set
{
HFNumericUpDown.Value = value.ToString();
//txtAutoCompleteCliente_AutoCompleteExtender.ContextKey = value.ToString();
// TODO: Change the text of the textbox
}
}
[System.ComponentModel.Browsable(true)]
[System.ComponentModel.Bindable(true)]
[Description("The text of the numeric up down")]
public string Text
{
get { return txtNumericUpDown.Text; }
set { txtNumericUpDown.Text = value; }
}
public delegate void NumericUpDownChangedHandler(object sender, NumericUpDownChangedArgs e);
public event NumericUpDownChangedHandler numericUpDownEvent;
[System.ComponentModel.Browsable(true)]
[System.ComponentModel.Bindable(true)]
[System.ComponentModel.Description("Raised after the number has been increased or decreased")]
protected virtual void OnNumericUpDownEvent(object sender, NumericUpDownChangedArgs e)
{
if (numericUpDownEvent != null) //check to see if anyone has attached to the event
numericUpDownEvent(this, e);
}
#region ICallbackEventHandler Members
public string GetCallbackResult()
{
return "";//throw new NotImplementedException();
}
public void RaiseCallbackEvent(string eventArgument)
{
NumericUpDownChangedArgs nudca = new NumericUpDownChangedArgs(long.Parse(eventArgument));
OnNumericUpDownEvent(this, nudca);
}
#endregion
}
/// <summary>
/// Class that adds the prestamoList to the event
/// </summary>
public class NumericUpDownChangedArgs : System.EventArgs
{
/// <summary>
/// The current selected value.
/// </summary>
public long Value { get; private set; }
public NumericUpDownChangedArgs(long value)
{
Value = value;
}
}
}
using System;
using System.Collections.Generic;
using System.Text;
namespace Corp
{
/// <summary>
/// Summary description for CorpAjaxControlToolkitUserControl
/// </summary>
public class CorpNumericUpDown : CorpAjaxControlToolkitUserControl
{
private Int16 _currentInstanceNumber; // This variable hold the instanceNumber assignated at first place.
public short currentInstanceNumber
get { return _currentInstanceNumber; }
set { _currentInstanceNumber = value; }
}
protected void Page_PreRender(object sender, EventArgs e)
{
const string strOnChange = "OnChange";
const string strCallServer = "NumericUpDownCallServer";
StringBuilder str = new StringBuilder();
foreach (KeyValuePair<String, Int16> control in controlsToRegister)
{
str.Append("function ").Append(strOnChange + control.Value).Append("(sender, eventArgs) ").AppendLine();
Append("{").AppendLine();
str.Append(" if (sender) {").AppendLine();
str.Append(" var hfield = document.getElementById('").Append(control.Key).Append("');").AppendLine();
str.Append(" if (hfield.value != eventArgs) {").AppendLine();
str.Append(" hfield.value = eventArgs;").AppendLine();
str.Append(" ").Append(strCallServer + control.Value).Append("(eventArgs, eventArgs);").AppendLine();
str.Append(" }").AppendLine();
str.Append(" }").AppendLine();
str.Append("}").AppendLine();
Page.ClientScript.RegisterClientScriptBlock(typeof(CorpNumericUpDown), Guid.NewGuid().ToString(), str.ToString(), true);
}
str = new StringBuilder();
foreach (KeyValuePair<String, Int16> control in controlsToRegister)
{
str.Append(" funcsPageLoad[funcsPageLoad.length] = function() { $find('NumericUpDownEx" + control.Value + "').add_currentChanged(").Append(strOnChange + control.Value).Append(");};").AppendLine();
str.Append(" funcsPageUnLoad[funcsPageUnLoad.length] = function() { $find('NumericUpDownEx" + control.Value + "').remove_currentChanged(").Append(strOnChange + control.Value).Append(");};").AppendLine();
}
Page.ClientScript.RegisterClientScriptBlock(typeof(CorpNumericUpDown), Guid.NewGuid().ToString(), str.ToString(), true);
}
}
}
and to create the loading view I use this: //The beginRequest event is raised before the processing of an asynchronous postback starts and the postback is sent to the server. You can use this event to call custom script to set a request header or to start an animation that notifies the user that the postback is being processed.
Sys.WebForms.PageRequestManager.getInstance().add_beginRequest(
function (sender, args) {
var modalPopupBehavior = $find('programmaticSavingLoadingModalPopupBehavior');
modalPopupBehavior.show();
}
);
//The endRequest event is raised after an asynchronous postback is finished and control has been returned to the browser. You can use this event to provide a notification to users or to log errors.
Sys.WebForms.PageRequestManager.getInstance().add_endRequest(
function (sender, arg) {
var modalPopupBehavior = $find('programmaticSavingLoadingModalPopupBehavior');
modalPopupBehavior.hide();
}
);
I'm creating just simple autocomplete sample.
taking one textbox adding autocomplete extender as
<asp:ScriptManager ID="ScriptManager2" runat="server">
<Services>
<asp:ServiceReference Path="WebService.asmx" />
</Services>
</asp:ScriptManager>
<asp:TextBox ID="TextBox1" runat="server" EnableTheming="True" ></asp:TextBox>
<cc1:AutoCompleteExtender ID="AutoCompleteExtender1" runat="server" MinimumPrefixLength="1" ServiceMethod="GetCountryInfo" ServicePath="WebService.asmx" TargetControlID="TextBox1">
</cc1:AutoCompleteExtender>
<asp:Button ID="Button1" runat="server" Text="Button" onclick="Button1_Click" />
Also creating web services as "WebService.asmx" & code inside this file is that
<%@ WebService Language="C#" CodeBehind="~/App_Code/WebService.cs" %>
------
then in Webservice.cs file i write code as
public class WebService : System.Web.Services.WebService {
MySql.Data.MySqlClient.MySqlCommand cmd = new MySqlCommand();
MySql.Data.MySqlClient.MySqlConnection con = new MySqlConnection();
//MySqlDataAdapter da = new MySqlDataAdapter();
MySqlDataReader dr;
public WebService () {
//Uncomment the following line if using designed components
//InitializeComponent();
}
[WebMethod]
public string[] GetCountryInfo(string prefixText)
{
int count = 10;
string sql = "Select * from tbl_patientmaster Where P_NAME like '" + @prefixText + "%'";
con.ConnectionString = System.Configuration.ConfigurationManager.AppSettings["HMSDBConnectionString"].ToString();
con.Open();
MySql.Data.MySqlClient.MySqlDataAdapter da = new MySql.Data.MySqlClient.MySqlDataAdapter(sql, con);
da.SelectCommand.Parameters.Add("@prefixText", MySql.Data.MySqlClient.MySqlDbType.VarChar, 50).Value = prefixText + "%";
System.Data.DataTable dt = new System.Data.DataTable();
da.Fill(dt);
string[] items = new string[dt.Rows.Count];
int i = 0;
foreach (System.Data.DataRow dr in dt.Rows)
{
items.SetValue(dr["P_NAME"].ToString(), i);
i++;
}
return items;
}
this code is not working
I'm using jQuery AutoComplete Plugin in ASP.Net as outlined in the article below, so that as a user types in a .Net textbox they get a list of options to choose them. This works fine, but what I need to do now is call a server side function when the user has finished typing or has choosen a value, rather than the user having to submit the value by pressing a button.
View 2 RepliesI am using Ajaxtoolkit 3.5.I am using an autocomplete textbox extender.My problem is I have populated Country in the autocomplete textbox.I have to populate city in another dr
View 1 RepliesIs it possible to do data caching in client-side in asp.net and c#.net iam planning to cache a dataset.
if so provide a sample?
I am using ASP.NET 3.5.
When the user click on say btnSubmit I want to first execute some JavaScript code and then execute some C#/VB.NET code.
Is this possible? If so how would one do it?
HttpResponse.End() seems to throw an exception according to msdn.Right now i have the choice of returning a value to say end thread(it only goes 2 functions deep) or i can call end().
I know that throwing exceptions is significantly slower (read the comment for a C#/.NET test) so if i want a fast webapp should i consider not calling it when it is trivially easy to not call it?
-edit- I do have a function call in certain functions and in the constructor in classes to ensure the user is logged in.So i call HttpResponse.End() in enough places although hopefully in regular site usage it doesn't occur too often.
Anyway, if for example I have a textbox that I want to enable when the user check the desired checkbox/radiobutton, I like the textbox to be default enabled=false. What's the good approach between these two?
a.) client side
[Code]....
I need to know on the serverside, if a RadioButton has been disabled (by javascript) on the clientside.
The (serverside) Enabled property is not the same as the (clientside) disabled property. Using MyRadioButton.Attributes("disabled") doesn't do the trick either.
I'm curious, anyone know the mechanism a checkbox control uses to remember that its checked or not checked after a postback?If I add them manually to a page via html as in <input type="checkbox"/> I have to use javascript and hiddenfields to keep things checked after a postback and I would have to have an onclick="dosomething()" inside the tags.Viewing the html source code for a page with a .NET checkbox control, there is nothing like that there.
I was writing a custom control and rendered my own checkboxes when I came across this problem. After the postback, the control would reload the checkboxes from viewstate and forget the user had clicked anything. As I couldn't use hiddenfields to track the changes (they got reset from viewstate too), I ended up using .NET checkboxes as childcontrols instead but this experience got me thinking.
How can I get ClientSide(JavaScript) Value for My ASP.net Custom Control?
for example I want to get a value like this:
var selectedItemID = getElementById("<%=MyControl1.ClientId%>").value;
How can i set a specific Value in my control scripts to get it from ".value" property like above?
Additional Note:
i want ".value" property(javascript) to get the dropDown control(one of my controls in my custom control) selected Value.
There's so much hype about ASP.NET MVC these days, but the truth is that ASP.NET webforms is not going anywhere for some time. Is there any way for current developers to optimize ASP.NET webforms to perform as fast as ASP.NET MVC?
I have noticed a significant difference in speed between ASP.NET MVC and ASP.NET webforms. MVC is a lot snappier and loads pages faster than webforms. Can I achieve the same with ASP.NET webforms by optimizing it? If yes, what would you recommend?
We are playing video(avi) in our web site .Its taking time to play the file .Nothing is showing for 2 mins.Is there any way to streaming the file.for playing video file code is from this linkhttp://www.daniweb.com/code/snippet216568.html
View 3 Repliesi want to show the Require filed validators first.then i want to validate the page controls. how to achieve this.
i wrote onclientclick event like this.
but i want to show required filed validators first .
I know the built-in ASP.Net validators come with a client-side framework, however I've been unable to find anything that lets me check a single validator for it's Valid state.
The validator in question is a RegularExpressionValidator, which I use to determine whether an e-mail address is valid or not.
Here's some brief code:
[code]....
Can any one provide me an idea about any ajax control which has following capabilities:
User should able to type to get auto-suggestions Dropdown should only display the values starting with the keyed-in characters. Most importantly there should be only one postback to fetch all the data to client side on the first key-in and then should filter the list values based on rest of the keys.
