can anyone show me how to use for loop to get item(0) and item(1) out from a dataset ?
im using a for each loop to get item(0) in my loop. how am i going to change to loop in order for me to get my item(0) and (1) out?
Code:
For Each r As Data.DataRow In temp_sec.Tables(0).Rows
d = r.Item(0)
db1 = d.Minute
'db = d.Second
x += db1
y = r.Item(1)
list.Add(x, y)
Next
I want to create dynamic datalist control with item template in a for loop.
Example: In my database, I have 20 Categories and 100 products. Each categories have some products. Now I want to show 20 categories all together in my page and it is not specific that categories will remain same. It can be increase or decrease. I am taking CategoryID with for loop and now I want to bind datalist according to the count of for loop.
I've done a lot of searching on this her on SO but I can't seem to find anyone who has done this. I'm sure it's a common problem but I can't figure out the right keywords to search for the solution so I'm sorry if this is a duplicate.I have a dataset where I've used the Generate Insert, Update, and Delete statements as well as the Refresh the Data Table options so that I can retrieve the last inserted ID when I'm using an ObjectDatasource.however, when I'm handling the ObjectDataSource-Inserted method, I'm getting a 1 as a return value, which I assume is the affected rows. I don't want that, I want the ID so that I can use it in my code.I looked at the generated code for the insert method and it is doing a SELECT after inserting, but it returns the whole row not the ID, so how can I get at this row to retrieve the value?
View 1 RepliesThis is the Grid am using ....
[Code]....
Every thing is working fine ....
Wat i did is in the first header of gridview dropdownlist i have binded the PO Item , so that user can select item n make invoice...
Here the problem is user will click addnewrow button to create new row second row , again user is able to select the same item what he selected in first row of gridview. here how to avoid duplication in the second row .
Say i have four PO item
Item1,Item2,Item3,item4
user may select Item1 in first row , after clicking addnewrow button user will get second row
here again user is able to select Item1 from dropdownlist ... how to avoid duplicate selection
coz the dropdownlist is binded from database using sqldatasource n filter based on user selected PO no.
Duplicate Item selection should be removed until all the four item is selected ...
I am using aspnet menu control and i want to hide the item initially on page load and show the item after an event is trigger say button lick event Can any one give me an example?
View 6 RepliesI have a list with 2 sorts of items. Items that have actual values (1,2,3,4 etc) and items that are like group headings so all their values are set to 0. If someone decides to select a group heading - which has a value of 0, is it possible to redirect them to my 'Select an item' item which has a value of ""?
If worse comes to worse, I can just reconstruct the entire list, although if possible I'd like to avoid it.
I have a project that queries a set of times from a database and uses these entries to populate a dropdownlist. Once the page is loaded, the user can select one of the items in the DropDownList. When the "Save" button is clicked, the Selected item value is returned to the [HttpPost] version of the controller action. This item is then stored into session. If the system returns to the page containing the dropdown, I want the saved Value to be selected in the DropDownList. What actually happens is that the DropDownList is always set to be the first item in the list.
Database Table: This data has been imported using Link to SQL
[code]....
I use a ItemDataBound for a repeater.But i use 2 kinds of linq querys to bind it.Some of them has a MerkID, and some doesnt have this item.So its easy i need to do this:
if(e.Item.DataItem.Contains("MerkID"))
{
//Code for linq query 1
} [code]...
So of course the if selection doesnt work, but how can i do that? I already tryed this:
DataRowView drv = (DataRowView)e.Item.DataItem; if (drv.Row.Table.Columns.Contains("MerkID"))
But that doenst work because he cant convert it to a datarowview because its a linq class.So what to do? Right now i use a try and catch, but there are better solutions i guess...
How can I get current viewed itemindex of a repeater item template, have tried a few stuffs i got from google search, but it seems not to work.Â
I have items like:
1 text link1
2 text link2
3 text link3
4 text link4
where 1, 2, 3, 4 are the itemindex, i want to be able to get 1 if text link1 is clicked, or 2 if text link two is clicked etc.
Here is my repeater html
Error 1 'System.Data.OleDb.OleDbDataReader' does not contain a definition for 'Item' and no extension method 'Item' accepting a first argument of type 'System.Data.OleDb.OleDbDataReader' could be found (are you missing a using directive or an assembly reference?)Â
public partial class Default2 : System.Web.UI.Page {
System.Data.OleDb.OleDbConnection Con = new System.Data.OleDb.OleDbConnection(System.Web.Configuration.WebConfigurationManager.
ConnectionStrings("MyConnectionString").ConnectionString);
protected void Page_Load(object sender, EventArgs e)
[Code] .....
I bind dropdownlist in my page
protected void Page_Load(object sender, EventArgs e) {
BindDropDownList(DDL1, "city1", "name", "ID");
DDL1.Items.Insert(0, new ListItem("select city", "0"));
}
And SP
LTER procedure [dbo].[city1]
as
begin
select id,Name
from city
end
And design code
 <asp:DropDownList ID="DDL2" runat="server" CssClass="daddsd">
</asp:DropDownList>
And here is imagebutton code that when click on it update data into table
protected void ImageButton_Click1(object sender, ImageClickEventArgs e) {
string data = Server.UrlDecode(Request.QueryString["BehCode2"]);
SqlCommand _cmd = new SqlCommand("insertinfo", _cn);
_cmd.CommandType = CommandType.StoredProcedure;
_cn.Open();
[Code] ....
Here when i click on button it insert all data into table but it didn't insert my selected item from dropdownlist it insert select city that i define in page_load
 DDL1.Items.Insert(0, new ListItem("select city", "0"));
And when i delete this code from page load it insert in table first row of my table it didn't insert my selected item from dropdown list.
I have a repeater control:
<asp:Repeater ID="rep" DataSourceID="XMLDSCompare" runat="server">
<ItemTemplate>
<h4><%# XPath("title")%></h4>
</ItemTemplate>
</asp:Repeater>
Now if its the first item in the total resultset, I want to add <div> to ItemTemplate control, if its the 2nd item, I want to add </div>
So output would be (not including table tags generated by repeater control):
<div>
title 1
title 2
</div>
<div>
title 3
title 4
</div>
<div>
title 5
title 6
</div>
How would I do this in the ItemDataBound event of repeater control?
I am trying to get a drop down and a form view to work together. I've never used form views before. I also am using the entity framework to do everything. This is also my first time with it.
I want to be able to have a drop down, that is populate from the same data source as the form view. So far that works fine.
I then want to be able to change the drop down item, and it change the form view item that is displayed. I cannot figure out how to make this work.
i use a dropdownlist in a page, with its items taken from a mysql database
i also use autopostback property...my problem here is that, every time i selecct an item, the first item in the list gets seelected
[Code]....
here the method OnItemDataBound , look at how it work
[Code]....
problem is the e.Item always get one and only one last item . turn out my listview display many rows but with a consistent content of the last user (in the database record) . How can i resolve this ?? any creative method are accepted , i'm just want to finish this project
I have 2 dropdownlist in my page
1-ddlzone1
2-ddlstore1
What I need is if I select default item i.e. 0 in Zone dropdown I need to show all items in store dropdown. Below is my stored procedure to get the stores
ALTER procedure [dbo].[selectcenter]
@RegionID varchar(5)
as
begin
select ID,Centername
from Shoppingcenter
where RegionID=@RegionID
group by ID,Centername
end
I have a listview set up in "flow" mode where the existing records are all on an extended page so you can scroll down to any record.
The InsertItem Template is in the first position, making it easy to insert a new record.
And one can scroll down the page to any record, click the edit button and update that record -- nice having everything on one scrollable page.
I am running into a problem with validations. I have validation controls restricting inputs for all the textboxes on the Insert Item template. They work fine. And on Item Inserted I am running a page validation:
Page.Validate()
If Not Page.IsValid Then
e.Cancel = True
End If
which works fine also.
The problem occurs when I scroll down to an existing record, and go to edit it. I have all the same validation constraints on the textboxes for the EditItemTemplate as I have on the InsertItemTemplate. But I cannot successfully do a page validation on updating the record. The code I am using on update is:
Protected Sub LVRentals_ItemUpdating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.ListViewUpdateEventArgs) Handles LVRentals.ItemUpdating
Page.Validate()
If Not Page.IsValid Then
e.Cancel = True
End If
End Sub
This results in a Cancel even if there are no validation errors on the InsertItemTemplate because the Page.Validate() seems to be causing the InsertItemTemplate to think its fields should be filled out also.
Here is the code for a typical entry of the InsertItem Template:
[code]....
All the controls in the Edit Item template are part of ValidationGroup "edit1" and those of the InsertItem Template are part of ValidationGroup "edit2"
How can I get around receiving validation errors on the InsertItem Template when I am trying to validate just the EditItemTemplate when both are present on the page?
I have a site where users can save images together with a couple of info fields about the image. The images are stored as binary data in the same table as the rest of the image info. So far pretty standard.
Now, the users should be able to upload a document, describing the image in more detail, along with the rest of the image and its' info. Size ~2MB per document.
My question is: Should I store this document (binary data) in the same table as the rest of the images or should I create a new table holding only the documents. There would of course be an id reference in the image table to the document in the document table.
I have a search function joining a couple of tables, including the image table, when searching for images. I need to know if there's a difference in efficiency between these two solutions. I always fetch the document data separately but if I don't win anything in having the documents in a separate table I'll just put it with the rest of the image info.
I'm asking this since I don't really know how SQL Server handle tables when joing and searching in them.
I have about 10´000 users with a maximum of 10 images per user. (ASP.NET - SQL Server) (I'm not asking if I should store documents in the database, but how ;)
Edit
Example 1:
columns in imageTable - id, title, dateAdded, image (binary data), document (binary data)
Searching for items from a specific user I would join the userTable and the imageTable and select title where image id equals user id.
So, will there be any difference in the performance if the document is in the imageTable or in an own table?
I'm trying to built in my web site the possibility to loud equal fields in the "select" page(when the user select item , I would like items that are related data in the "name column"ill be fire hopefully I'm clear That I have tried doing was in my repository I have written:
[Code]...
I am developing an application of library management system in asp.net. I want to implement item recomender system. when user search any bsook like c# ,the system also show related other books of c# in the botom of page.
View 1 RepliesI have an asp.net menu in which i have to let some nodes visible or invisible base on some logic.I know i can find value by item but i wnated to FindItemByValue of my asp.net menu.Could it be possible?
View 3 RepliesAs it stands right now, I have a literal control on my page. In my code-behind, I'm using StringBuilder to generate some JavaScript. Also on that page I have a item collection. What I want to do is for each item in my item collection, generate my literal which will in essence generate my JavaScript. Here is an example of my code-behind now. I'm ok with doing something different, but I just need to generate said JavaScript for every item in the collection and I'm not sure how to do it.
System.Text.StringBuilder sb = new System.Text.StringBuilder();
sb.Append("<script type='text/javascript'>");
sb.Append("mboxCreate("product_productpage_rec",");
sb.Append(""entity.id=" + _prodID + "",");
sb.Append(""entity.categoryId=" + _categoryID + "",");
sb.Append(""entity.name=" + _prod.Title + "",");
sb.Append(""entity.pageURL=" + Request.Url.ToString() + "",");
//The following value has been taken from the productImageControl code behind.
//Might have to refactor in future as a property of the image control.
string filename = AppSettingsManager.Current.ProductImagePathLarge + _prod.ActiveProductItemCollection[0].Sku + AppSettingsManager.Current.ProductImageExtension;
sb.Append(""entity.thumbnailURL=" + filename + "",");
sb.Append(""entity.inventory=" + _prod.ActiveProductItemCollection.Count + "",");
sb.Append(""entity.value=" + _prod.ActiveProductItemCollection[0].ActualPrice + "",");
sb.Append(""entity.ProductItemID=" + prodItem.Id + "",");
sb.Append(""entity.addToCartImg=~/Images/Buttons/btn_AddToCartFlat.gif");<");
//The last line has to be /script. < inserted on prev line. do not change it or bad things will happen.
sb.Append("/script>");
//add script to page
this.LiteralMBoxScript.Text = sb.ToString();
I have a drop down list control populated with items and some code to take the currently selected item value. The problem is I only get the value of the first item in the list regardless of what item is actually selected. Here is my code to populate the drop down:
protected void displayCreateCategories()
{
StoreDataContext db = new StoreDataContext();
var a = from c in db.Categories
orderby c.Name
select new{catName= c.Name,
catId=c.CategoryID};
ddlCategory.DataSource = a;
ddlCategory.DataTextField = "catName";
ddlCategory.DataValueField = "catId";
ddlCategory.DataBind();
}
To get the value of the currently selected item which in my case is always of type integer I do label1.text=Convert.toInt32(ddlCategory.SelectedValue); I get the selected value, but it is always for the 1st item in the list. I'm pulling my hair out over this.
I need to add an item in a dropdownlist and also modify the value of that item, but im getting an error : "Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index"here's my Page load
Dim rt as new OleDbCommand("Select * from Question ", con)
dim rd as OleDbDataReader
rd = rt.ExecuteReader
Dim a as new OleDbCommand("Select Count (*) as C from Question" , con)
[code]...
I am using list view to display the the data but i am getting an error like An item placeholder must be specified on ListView 'ListView1'. Specify an item placeholder by setting a control's ID property to "itemPlaceholder". The item placeholder control must also specify runat="server.Even i have specified the itemplaceholder id but no use still same error.
[Code]....