I am playing around with the membership database and have a question. Lets say I have a company called company ABC. There are 10 branches that belong to comapany ABC.
IS there anyway to create a relationship within the database using company ABC as the parent and having the 10 branches as childs?
The error message below i get when I"m trying to create a new user in a project management system we use for a client. I type in all the corresponding information then when I click create it throws this error.
invocation. at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at System.Web.Administration.WebAdminMembershipProvider.CallWebAdminMembershipProviderHelperMethodOutParams(String methodName, Object[] parameters, Type[] paramTypes) at System.Web.Administration.WebAdminMembershipProvider.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, Object providerUserKey, MembershipCreateStatus& status) at System.Web.UI.WebControls.CreateUserWizard.AttemptCreateUser() at System.Web.UI.WebControls.CreateUserWizard.OnNextButtonClick(WizardNavigationEventArgs e) at System.Web.UI.WebControls.Wizard.OnBubbleEvent(Object source, EventArgs e) at System.Web.UI.WebControls.CreateUserWizard.OnBubbleEvent(Object source, EventArgs e) at System.Web.UI.WebControls.Wizard.WizardChildTable.OnBubbleEvent(Object source, EventArgs args) at System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) at System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Its very easy to add users to roles by using the in built controls. but how can add users through customized login controls?. i have tried using
//MembershipUser m = Membership.CreateUser(name, pass, null);
Is it possible to more fields in User table If yes, how to do that? share sample code. Do we we need to change any membership stored procedures?
View 3 RepliesI have a problem with my membership management. I moved the aspnet membership database to my MSSQL server and I would like to create an add user form not using the CreateUserWizard (I would like to add more information then in the simple CUW). I've created the form and I would like to use the Membership.CreateUser method to add the user. After running the script (VB) the user is available in the aspnet_Users table, also in the aspnet_UserInRoles table but not in the aspnet_Membership table. I'm sure that something is wrong with the configuration, I just can't find what.
[Code]....
I have an ASP.NET project. Naturally, through different releases and development branches, the db schema changes.
What are some ways to cleanly handle the schema changes in a friendly way so that I can easily switch between development branches?
I use SQL Server 2005, but general techniques probably work.
In order to better learn various techniques in ASP.NET development, I've written an ASP.NET app at home, which I use for learning. (It's a simple application we use to track our video library.) When I first started it, I didn't bother with adding membership to it. However, I've recently thought it might be nice to add the ability to allow family members to vote on various movies, etc. In order to track their preferences, I'd need table in the database, etc. (I won't bother going into the details.) So I was thinking that it might be good to add ASP.NET membership to this app, but I've never done that before. Normally, I've only added membership to an ASP.NET app when I was first getting it started; not on an established app. Can I add ASP.NET membership to an older app?
And if the answer to that question is yes, then I would like to use simple Windows authentication. This is a simple peer-to-peer network I've got, everyone has an account (profile) on the box that hosts the ASP.NET app, so I would just use that. Right now this app is an ASP.NET 3.5 app, but I could move it up to ASP.NET 4.0.
My application uses .net membership, I added some new properties but on calling Profile.save() it still save the old values, What i am doing wrong?
[Code]....
[Code]....
I am trying to use the ASP Membership database, and I am having trouble getting the provider connected. I added the following to my Web.Config.
Code:
<membership defaultProvider="SqlMembershipProvider">
<providers>
<clear />
<add
name="SqlMembershipProvider"
type="System.Web.Security.SqlMembershipProvider"
connectionStringName="NewsletterSQLConnectionString"
/>
</providers>
</membership>
The connectionstring exists, and I am able to use it on the page to load and access a GridView control. In the Website Administration Tool, under Provider, and selecting 'Select a single provider for all site management data', I don't see any providers, indicating that this new provider is not loaded. If I remove the Clear, I do see the AspNetSqlProvider, however when I test it I get the error that it can not connect to the database.
I have DB (my.mdf ) with already created membership (aspnet_db tables). There are defined roles and users.
I would like to integrate it in my project.
I dropped *.mdf into App_Data folder. When I open app.net configuration (under menu Project) I can't see neither User nor Roles.
What step am I missing?
I have the default membership table that was added automatically, then just used server explorer to add more columns, like FirstName, LastName, etc. In my code I can access all the default columns, but not the ones I created. Any thing special I need to do?
Here is how I access the table. using user. gives me all columns, but the one I created.
string userName = User.Identity.Name;
MembershipUser user = (MembershipUser)System.Web.Security.Membership.GetUser(userName).ProviderUserKey;
I'm currently writing a website in VWD2010 Express, which requires me to write a custom membership provider.
I've followed the tutorial here [URL] , which seems relatively straight forward.
I am, however, struggling at the stage where the custom membership provider is included in a site. Now obviously the tutorial writer is using a different version of VS to me, so I've had to adapt it somewhat. Instead of building the class as a dll, and referencing that in a new site, I've started a new site from scratch and added the custom membership provider to the Add_Code file (HDIMembershipProvider.vb). It is now required that I add details of the provider to the web.config file, which seems to be where I am encountering problems.
The tutorial requires me to add:
[Code]....
within the System.Web part of the web.config file. However, upon running the site I get the error:
Could not load type 'HDI.AspNet.Membership.HDIMembershipProvider'.
I realise that how you reference the class must have changed since the tutorial was written, but I can't for the life of me find the format I should be using, and trial&error has turned up nothing so far.
I have followed scott's gu tutorial here I uploaded the whole database to my site. Before doing what Scott's says I had one username stored in the membership. How can I create an additional user now that the table is in the web host? I can see that there's aspnet_Membership, aspnet_Applications, etc..etc
View 2 RepliesI'm not familliar with the membership provider class. On my create user page I have the following code
[Code]....
If I want to add some fieds like phone number and address, how can I do it? And what happen to the following function if those fields are added.
[Code]....
I am running windows 7 and NET Framework 4.
Problem is I dont know how to locate the asp.reg.sql tool that will do this using windows 7.
how to do this?
There are lots of posts about this issue but I can't work out the answers as most of them are for C# or similar. I'm trying to automatically insert the UserId generated by Membership into a custom table. I have membership working correctly, as well as the custom table (I'm able to insert other things from the registration form). But I can't get it to extract the generated UserId and insert it into the custom table. Here's my code:
[Code]....
As you can see I've experimented with the parameters for inserting the record, but that doesn't work (I get an error about ProviderKey not being a part of system.web.security.membershipuser).
I would like to know simple thing, If i'm adding additional information to UserProfile such as: Country, PhoneNumber etc'.. So, I added a Table In my DB (which also Got all Membership Provider tables...)
UserProfile, and added Stored Procedures for it for Insert / Update... I would like to know, If I need to create in Business Object a Class for Profile Only? (Cause the User is managed Already by the Membership Provider) And Create for it Also in Business Logic -> ProfileManager with Methods that will use the Stored Procedures to Update and Insert Details? Do I need to do it like this? Or there is another way? What's the right way doing it?
I am createing user dynamially with the below code; string MyPassword = Membership.GeneratePassword(8,0).ToString(); Membership.CreateUser(TextBox7.Text, MyPassword, TextBox8.Text); but before I start creating, I would like to check if the user name is used before or not.
View 2 RepliesThe following code is used to add the asp membership tables to an already existing database instead of creating a seperate database for membership and having two databases in the application.
aspnet_regsql.exe -S .SQLEXPRESS -U username -P password -d databsename -A all
It works fine by adding the membership tables to the existing database that is located in the c drive, program files sqlserver folder.
But my database however is not in the c drive but located in my asp website app_data folder, so the above code does not give any error and the tables are not added after I run it. how can I now add the membership tables using the above code when my database is located in the website app_data folder,
I am wondering what's the easiest way to go about doing this. I am using the user signup form control that comes with .net and they can create user through the application and once they do users see the "members area" of my site.
However, they are only trial members. using my paypal form, once they pay for service, they become a paid member.. so I want to keep track of this in the membership table by having a column in that table: bit registeredUser. Do I have to create my own overriden membership class for this, at first I thought there was already a column like this called isApproved, but seems thats for something else because if its set to false user cannot even login.
I have a custom membership user class and custom MembershipProvider working against database. Due to security reasons the user passwords are stored in the database as hashed values. So my procedure
public override bool ValidateUser(string username, string password) is
{
//select hashed password from db
return (EncodePassword(password) == dbpassword)
}
[code]....
I m using ajax accordion control to display the information of my company branches. Now it always displays one pane at a time. But i want that it should not display any pane at a time. Only a single pane should be displayed when user click on header of that pane.
View 2 RepliesInto below code which is working fine, but the last section which started from using (SqlCommand SendMailcmd ... update it as i want when the user click on the button the code take the AdsID and (QAdsEmail "the user email") and send an e-mail to user depending on QAdsEmail and inside the email create a link to URL... so the user when he receive the mail he can click on it and move to the page to edit his Ad info ...
The table where below info will store in is called "ads" and the column that's need for sending email with ad info/the E-mail part of the code below i just copy it from another part of my application ...
protected void adNewQdadsbtn_Click(object sender, EventArgs e)
{
string FileExtentio = System.IO.Path.GetExtension(RegInteFileUploadImg1.FileName);
string FileExtentio2 = System.IO.Path.GetExtension(RegInteFileUploadImg2.FileName);
string FileExtentio3 = System.IO.Path.GetExtension(RegInteFileUploadImg3.FileName);
string FileExtentio4 = System.IO.Path.GetExtension(RegInteFileUploadImg4.FileName);
string FileExtentio5 = System.IO.Path.GetExtension(RegInteFileUploadImg5.FileName);
[code]...
I'm using Forms authentication and I would like to make use of roles, can I somehow set the role of the user without Membership ?
View 4 Replieshow to perform log out task in web page in different forms
View 1 Replies