Page Causes Validation Errors When Navigating To Another Page - Tab?

Mar 31, 2011

I have a couple of pages with standard validation controls such as RequiredFieldValidator etc inside my RadAjaxPanel.As soon as I navigate to another tab in my RadTabStrip the page seems to force validation errors and pretty much "locks" the page even though non of the fields was selected to enter data.Only once all the required fields was entered the page seems to release the "lock" and only then am I able to navigate to another tab / page without even submitting the page.

what might be causing the "lock" and forced validation errors on the page?

View 1 Replies

Similar Messages:

Mvc 2 Validation Always Shows Errors On Initial Page Load

May 14, 2010

I've searched around a lot, and honed this problem down to this case: I'm using the PRG pattern, pragmatically I'm using the same DTO for my post/get actions. It looks like when I have the dto with the data annotation attributes in the get action parameter list, the validation is always displaying errors, every time on initial page load. In some cases this could be desired behavior if you put asterisks in the error message, but how do I get rid of it?

View 1 Replies

Web Forms :: Scroll Page To The Position Where Validation Errors Occur?

Jul 29, 2010

I have serveral long ASP.Net pages, I use RequiredFieldValidator, RegularExpressionValidator and ValidatorCalloutExtender for validations, Submit buttons are typically at the bottom of the pages. The problem I have: if the errors happen at the top portion of the page when Submit buttons are clicked, the forms do not scroll to the top automatically, the users have to scroll up to see the ValidatorCalloutExtender.

View 2 Replies

VS 2010 - Prompt User Before Navigating Away From A Page And Perhaps Stay On Page

May 15, 2012

I need to check information the user has entered on a page against what I have in my database to see if he is entering duplicate data. It is up to him if he wants to proceed or not. I just need to alert him.

The problem is I don't own the button that he clicks so I can't hook up a javascript confirm to the button click. I am running within vendor code. I have an "override PageLoad()" procedure where I can test what page they're currently on. If they are on page "EditForm.aspx" and would normally navigate to "UserFinish.aspx" without any custom code of mine "interfering", I want to test what they've entered on EditForm.aspx and present them with a popup if they've entered duplicate info, and if they click OK button then proceed to UserFinish but if they click Cancel then stay on EditForm.

View 6 Replies

Security :: Navigating To Different Page

Jul 18, 2010

In the web.config i am using as below. When the Login credentials are correct it should take to Products.aspx.Even when the credentials are correct this is displaying Login.aspx. Checked "Integrated Windows Authentication".
Using IIS 5.1.


View 5 Replies

Web Forms :: How To Detect Someone Navigating Away From A Page

Jan 8, 2010

How do I have a pop-up message come up that says "Are you sure you want to navigate way from this page? (OK) (Cancel)" when someone either clicks the back button or the close button?

View 2 Replies

Maintaining GridView Current Page Index After Navigating Away From Gridview Page?

Feb 14, 2011

I have a GridView on ASP.NET web form which I have bound to a data source and set it to have 10 records per page.

I also have a hyper link column on the GridView, such that a user can navigate to another page (details page) from the list. On the details page, they have "Back" button to return to the GridView page

I am looking for sample code snippet on the Server Side on how to specify the page index to set the GridView after data binding.

View 2 Replies

How To Stop User From Navigating To The Previous Page

Apr 26, 2010

I am developing a simple email portal as my college assignment and I refer gmail for various features.Now when we sign into a gmail account and then if we hit the back button of the browser we somehow still remain on the inbox page.In my case after login if I press back button I comeback to the login page.

View 2 Replies

Delete Javascript Cookie While Navigating Away From Page

Mar 18, 2010

If I create a cookie in Javascript document.cookie = 'unseen' how do I delete it when I navigate away from this page? This is the only cookie I am creating on the page.

View 3 Replies

Access :: Navigating Database Records To The Next Page In Web Form?

Dec 28, 2010

I am new to ASP.NET. I have encountered a problem in navigating the database records that is displayed in the web form , the Next and Previous buttons. I have 4 imageboxes and 2 textboxes under each image box for displaying database records.

I am currently using an Access database with a table "Images" and there are 4 columns in it. "ImageID", "ImageDescription","ImageofPicture","Description".

My Code is below:


View 2 Replies

Web Forms :: Prevent URL Change In Browser When Navigating From One Page To Another?

Nov 13, 2013

i want to redirect from one web page to another web page in same server with some query string values, but i don't want to change my URL string  and i don't want to display any query string parameters in URL.

View 1 Replies

Web Forms :: Master Page Validation Effects Content Page Validation?

Jul 8, 2010

I have a search control in my master page with the following validation on the search btn's OnClientClick:


Then in the content page I have various controls with validation and a validation summary. I have few custom validators on the content page like below:


which uses the clientvalidationsfunctions which set the validity of the page.Now when I leave the search box in the header blank and I click the submit btn in the content page it posts me back to same (source) page and while debugging I find that the Page.IsValid is false. But if I write something in the search textbox in the master page and the fill the required fields in the content page and click the submit btn in content page it works fine. Why is that so? My validation groups are different on master page and content page.

View 3 Replies

"Sys" Is Undefined Javascript Error When Run Page By Navigating To URL On Server

Mar 15, 2011

using 2005 I am getting a funny javascript error but not when in debug mode, in debug mode when I'm running the application all is well but when I run the page by navigating to the URL on the server I am getting the javascript error:


'Sys' is undefined

Sys.WebForms.PageRequestManager._initialize('ctl00$middleContent$scrptMan', document.getElementById('aspnetForm'));
Sys.WebForms.PageRequestManager.getInstance()._updateControls([], [], [], 90);

scrptMan is the name of the scriptManager on the page that I declare on the contentPage. Very strange this is only happening when I access this site outside of the Dev environment. Has anyone seen this before?

View 2 Replies

Navigating From One Website Page To An Other Website Page

Apr 4, 2011

i want to carry a message from application to another social networking website through href html element and i need to display that message when i loggs into that website(into To textBox).

View 2 Replies

Getting Mixed Results With Page Validation And Modal Popup Usage On A Page?

Mar 9, 2010

I have a page that works great until now that they wanted to add a ModalPopup based on a field value. Before the addition of this modal popup, i had a button event that would do the inserting of the data, it caused the page to validate and as long as the page passed then it would insert and move on to the next page. Now i have a ModalPopup displaying IF a certain field is empty. If they answer Yes to the modalpopup question, it takes them back to the page and sets the focus on that field. Works fine, but if they select No then i need the page to validate and insert the record and move on.I have a customvalidator for the field i need to check. I then have my insert on the main button that causes the validation. The "Yes" and "No" buttons within the modalpopup have the following setup.

My Main submit button has the following:

If i select NO it just goes back to the page and doesnt move forward. If i select YES and enter something the page pops up the modal again and again because i've clicked in the field and keeps asking even though there is now a value in the field. But since there is a value, i can continue on to the next page.

View 4 Replies

Web Forms :: Content Page Validation Doesn't Work Under Master Page?

Dec 17, 2010

I have very simple validation on the aspx page (highlighting not valid textbox), and it works perfectly. But when I try to work with this page using MasterPage, I've got an error - "Object reference not set to an instance of an object." (with reference to the line "aControl.BackColor=Drawing.Color.White" - underlined).

Here is the code of the content page.

<%@ Page Title="" Language="VB" MasterPageFile="~/MasterPage.master" CodeFile="testValid.aspx.vb" Inherits="testValid" %>


View 4 Replies

VS 2008 Done But With Some Errors On Page?

Aug 23, 2010

Last night i have ran my application which was workin 100%, but in the morning when i run it, it shows the error message in IE Status Bar Done but with some errors on Page due to this, my Menu and TreeView is not appearing well.

View 10 Replies

Get Errors In App_Web_olwtcupi.4.cs Page?

Nov 10, 2010

I have an error I haven't seen before. One minuter the debugging works fine, the next a App_Web_olwtcupi.4.cs opens in Visual Web Developer (2008) with the following code marked:


I don't know what I did, I've only written code in my aspx and aspx.cs files and I've never seen this before. This is not the first time I use Visual Web Developer, or c# and I'm truly puzzled..

View 3 Replies

Redirecting To Custom Errors Page?

Mar 18, 2011

if I am redirecting to an error page from global.asax file, can I get hold of the page in which the error had originally occurred?

View 3 Replies

Capture Errors On A Per-page Level?

Aug 9, 2010

I want to capture errors on a per-page level. I've added the following code to my code behind page:

public void Page_Error(object sender, EventArgs e)
Response.Write("Unhandled error on the page.");

I have also ensures that AutoEventWireup="true".

I have some gridviews on this webpage that use a SQLDataSource. I'm hoping to use this error message (which will be better when I get it working, response.write is mostly just to test) to cover up those errors with something more user friendly. Yet when I have an error ("Cannot open database" for instance), Page_Error never fires and I get the ugly yellow screen of death instead.

View 6 Replies

Custom Errors Not Working / 404 Page Not Found - How To Fix It

Mar 16, 2010

I'm trying to set up custom errors for in webconfig/global.asax on Server 2003, IIS 6. Got it working find for .aspx pages but not for any htm or html pages. So I found the article describing how to open IIS manager, click configuration, copy path for .aspx extension and add one for .htm Did that.

Restarted website: Now I get the blank white page explaining there's a problem but not the 404 page not found

Restarted web services: same thing

View 5 Replies

Web Forms :: Sorting And Understanding Web Page Errors?

Sep 14, 2010

your posts and answers are very informative and helpful in my own devolopment and understanding the nature of the beast. Im running vs2010 on a 64bit windows 7 devolopment machine. For days I have been trying to get a Microsoft Reportview to render in a popup. ( i have done this in vs2008 ). I have tried applying the same code from vs2008 to Vs2010, but am comming up with page erros. When loading the default.aspx ( testpage ) I get 'Done but with errors'. If I click on button 1 which shows the popup, I get the report viewer, but it just sits there 'loading'. From advice givenm on this forum, I have used the IE view source code to try and loacate the problem... but to be honest, I dont understand why the page complies ok, but i get errors when it is run, or indeed how to rectify the problem. I have highlighted the two errors.Ie view source code:




View 1 Replies

How To Use Custom Errors Page In Windows Authentication

Mar 18, 2011

I am using 3.5 web.config to limit access and it works great.

<authentication mode="Windows">
<allow users="Bill, John"/>
<deny users="*"/>

Unauthorized (but authenticated) users will be blocked by a system error message saying that:

Server Error in '/' Application Access is denied.

Description: An error occurred while Error message 401.2: Unauthorized: Logon failed due to server configuration.

In order to make the message more friendly, I uncomment the customErrors flag and create a GenericErrorPage.htm in the root path of my project.

<customErrors mode="On" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />

However, it just doesn't work. I still get the system error message rather than my custom error page.

View 1 Replies

C# - Handle All Errors/messages In One Place On Page?

May 7, 2010

On my site I put things in Web user controls. For example, I will have a NewsItem Control, an Article Control, a ContactForm control.These will appear in various places on my site.

What I'm looking for is a way for these controls to pass messages up to the Page that they exist on.

I don't want to tightly couple them, so I think I will have to do this with Events/Delegates. I'm a little unclear as to how I would implement this, though.

A couple of examples:

1: A contact form is submitted. After it's submitted, instead of replacing itself with a "Your mail has been sent" which limits the placement of that message, I'd like to just notify the page that the control is on with a Status message and perhaps a suggested behaviour. So, a message would include the text to render as well as an enum like DisplayAs.Popup or DisplayAs.Success

2: An Article Control queries the database for an Article object. Database returns an Exception. Custom Exception is passed to the page along with the DisplayAs.Error enum. The page handles this error and displays it wherever the errors go.

I'm trying to accomplish something similar to the ValidationSummary Control, except that I want the page to be able to display the messages as the enum feels fit.

Again, I don't want to tightly bind or rely a control existing on the Page. I want the controls to raise these events, but the page can ignore them if it wants.I'd love a code sample just to get me started.

I know this is a more involved question, so I'll wait longer before voting/choosing the answers.

View 3 Replies

404 Errors Being Thrown But User Not Being Sent To The PageNotfound Page?

Jan 5, 2011

So I had to change all the links on a certain site, so I put in a PageNotFound page.

I setup web.config to redirect 404 errors to this PageNotFound page.

After going live, the PageNotFound page was the most visited page, something like 5000+.

I later determined that this was the issue: Why is @font-face throwing a 404 error on woff files?

Basically font-face was throwing 4 404 errors on every page.

My question is this, would the PageNotFound page be hit that way? Because I was never redirected to the 404 page, but it was registering as the highest hit page until I fixed the font-face issue.

View 2 Replies

Copyrights 2005-15, All rights reserved