ADO.NET :: Open SQL Server Connection Troubleshooting?

Sep 2, 2010

This is regarding ASP.Net (VB) 2.0 and SQL Server 2008. My project's (there is only one in my solution) has a "Start Action" set to a "Specific Page" (..FormsfrmMain.aspx). Occasionally (though not always) a large number of connections (30+) will be opened prior to the frmMain.PreInit event. These connections stay open for quite some time. I am closing all of my connections with extreme prejudice. In my "finally" clause of my try...catch I have myconnection.close. Immediately after the "End Try" I have myconnection.dispose (redundant, I know). I have accounted for all connections. I placed a breakpoint on frmMain.PreInit and then (sometimes) a large number of connections (used SSMS to run sp_who and sp_who2) will have just opened.What would open a large number of connections prior to the starting page's preinit event? I am closing (and then disposing) all of my connections. I thought that I must be missing a myconnection.close in the "finally" clause, but I have looked repeatedly and cannot find anywhere that a connection is open and then not closed. Also, I do not believe that I have even opened a connection prior to the frmMain's preinit event.

View 3 Replies


Similar Messages:

Visual Studio :: Error Unable To Add Data Connection. ExecuteScalar Requires An Open And Available Connection. The Connection's Current State Is Closed?

Sep 13, 2010

I'm using Visual Studio 2008, and my database is SQL Server 2000.

I want to add a connection to the Server Explorer in VS. The Data source is Microsoft SQL Server (SqlClient). After entering in all my information and I click Test Connection, it is successful.

But when I click OK, I get the error:

Unable to add data connection. ExecuteScalar requires an open and available connection. The connection's current state is closed.

View 3 Replies

Could Not Open A Connection To SQL Server?

Aug 31, 2010

I have problems connecting to my database server. The database server is not local, I am connected via its IP address. It works fine in my development machine. After publishing the website to my server, it can not connect to my database server. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)Why can't my publish server connect to the database server, whereas it works fine through the development machine?

View 5 Replies

SQL Server :: Connection Is Currently Open For Database?

Oct 20, 2010

I devlopyed on asp.net application in IIS, i need to know how many current database connection is open for the database..

so how can i check how many connection are currently using for this database... if we dont want some connection how can we kill the connection

View 2 Replies

SQL Server :: Error: 40 - Could Not Open A Connection To SQL Server?

Feb 18, 2011

I am facing a strange problem .can't figure this out.my web site's all pages are running fine except home page.i got this error

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,error: 40 - Could not open a connection to SQL Server)

View 5 Replies

DataSource Controls :: Error 40 - Could Not Open A Connection To SQL Server

Jan 8, 2010

I have an application with a few dbml files to connect to several sql servers in order to import data from one to another using Linq to SQL.

There are 2 connection strings with integrated security and in one I provide user ID and password.

It all works great in the development workstation. I've then wrapped the dll project and deployed the asp.net application to a test server. Then, when I tried to run the application to import the data, I got a connection exception:

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

I figured out after some debugging the problem is with the DataContext whose connection string is the one I provide user ID and password. Now, the funny part is that the same connection string works if I create a udl file and test it. And again the same connection string works with my development workstation.

View 4 Replies

SQL Server :: Implications Of Not Closing An Open Connection Declared Locally?

Oct 5, 2010

I was wondering about something. I'm supporting a .NET C# application which has a number of database connections declared locally as IDbConnection with MS SQL Server and NHibernate. These connections are declared locally and not explicitly closed after a specific operation is performed. Are these connections automatically closed after the local method is executed, or could these connections be floating around somewhere? We're having semaphore max out problems, and I'm trying to see if this may be the culprit. I'm doubtful, as I believe these connections would automatically close, but thought I'd throw out hte possibility.

View 1 Replies

Forms Data Controls :: SQL Error While Establishing Connection: 40 - Could Not Open A Connection

Jun 5, 2010

I previously used a datasource and a connection string to connect to my database on sql server and all orked fine. The connection string was saved in my web.config file and is: ....

View 1 Replies

DataSource Controls :: Where To Catch "Could Not Open A Connection To SQL Server" Error?

Mar 25, 2011

I have developed Dynamic Data application for DB administration. I'd like to show thrown exception message (when connection to db is closed) in UI friendly manner. I cant figure out where to catch this exception.

Tried EntityDataSource events in List PageTemplate - no success.

View 1 Replies

ADO.NET :: Connection Error "ExecuteNonQuery Requires An Open And Available Connection" After Deploying To IIS

Feb 17, 2011

I deployed my MVC app to IIS 7.0 and I keep getting the following error; ExecuteNonQuery requires an open and available Connection. The connection's current state is closed I dont get this with the app locally on my machine. Where could this error be occurring??

View 2 Replies

SQL Server :: Connection To Sql Server / Error "A Network-related Or Instance-specific Error Occurred While Establishing A Connection To SQL Server

Nov 23, 2010

I just installed sql server 2008 R2 on my computer. I am trying to connect to sql server throught my C# code and everytime I run the C# program,

I get this error "A network-related or instance-specific error occurred while establishing a connection to SQL Server.

The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) "

The connection string that I used in my web.config file is

[Code]....

I am not sure what am I doing wrong, but I followed this article below step by step and still I am getting the same error

http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/

My instance name is MSSQLSERVER and the server that I am using is on my local machine and it has my computer name in it.

View 10 Replies

SQL Reporting :: Troubleshooting No-data In Report?

Jun 11, 2010

Got an rdlc report that I'm running in sharepoint 2007. Works fine on the test server, shows no data on the prod server. Don't get any error message, just don't get any data. There is data in the database, and other pages in the app correctly access the database.

App is running from the in folder under the sharepoint site. I noticed a "failed to load app dll" message in event viewer, so i'm guessing there's some permissions issue possibly going on. App dll loads fine for when I hit other pages, however, i'm guessing since Report Viewer is running from the gac there may be a problem calling the partially trusted in dll?? I'm just guessing here. Like i said this app is working correctly on the test server, which has the same configuration - same os, same app, same web.config settings. Apparently something is different though.

View 1 Replies

Forms Data Controls :: RowCommand Event Troubleshooting?

Jul 12, 2010

I have a gridview with a button column that triggers the following code:

[Code]....

My gridview has multiple rows and multiple columns, yet I do not get a return on my Response.Write.Is there any obvious problem with my code here?

View 4 Replies

DataSource Controls :: Troubleshooting / On Submission None Of Data Gets Entered Into Database?

Jul 23, 2010

I'm a rookie at all this and need some insight from veterans.

I'm working on a web form that submits data to a database. I'm using C# as my code behind language and am using LINQ to SQL with a LINQ data source. I'm working in the code-behind page to format/concatenate the user's data before going into the database.

Everything looks like it's formatted and aligned correctly. I am not receiving any errors or warnings, but on submission none of my data gets entered into the database.

My question is... how should I troubleshoot or go about finding out what's keeping my data from being entered into the db.

View 5 Replies

ADO.NET :: Open And Close Connection?

Mar 23, 2011

When should i open and close the database connection.and which are best data classes (for e.g dataset, datatable etc) should i use when connection is open or close.

View 3 Replies

Visual Studio :: Error Adding Connection In Server Explorer - Unable To Add Data Connection. ExecuteScalar Require

Sep 30, 2010

I have VS 2010 professional. I am trying to open "ASP.Net Configuration" through Project -> ASP.Net Configuration.

It pops up the Notification about the ASP.Net Development Server localhost but doesn't open ASP.Net Configuration in the default browser.I clicked on the Root Url (by double clicking on the 'development server' at the right bottom from Notification Manager).

It throws following error

"An error was encountered. Please return to the previous page and try again."

Clicking on "How do i use this tool".It opened page with error.

Tool Has Timed Out

View 2 Replies

Php - Keep Sql Connection Open For Iterating Many Requests?

Jan 26, 2011

this is general to any operation calling an SQL server, or anything requiring an open connection at that.Say I have anywhere from 20 to 1000 Select calls to make for each item in data being looped. For each step, I'll select from sql, store data locally in a struct, then proceed. This is not a very expensive call, so should I keep the connection open for the entire loop? Or should I open and close every step? How expensive in run time is opening a connection? I would think it'd be better to keep the connection open, but would like to get the correct response for this.

View 4 Replies

Open A Connection Object In A Windows Service?

Nov 5, 2010

Using vb.net 2005

I am trying to open a connection object in a windows service but getting an error, what do i need to do:

what I have now:

[Code]....

on the Open line i'm getting a squiggly error saying "declaration expected" for the MyCon.Open.

do I need to import something?

View 6 Replies

Informix Odbc Connection Slow To Open

Apr 28, 2010

I have an application that takes a long time to open odbc connections (like 20 sec) also takes forever using arcmap and arcsde but when I try the connection on the odbc data source administrator, it tests it really fast. Does anyone have any idea of what my be causing this? btw the application works fine in another computer with another database

View 2 Replies

ADO.NET :: Unable To Open Connection In C# Using Ms Access As Database

Jan 3, 2011

[Code]....

and i am receiving error as

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Description:An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

View 9 Replies

State Management :: Keep Socket Connection Open?

May 26, 2010

I wrote a small socket client application talking to my asp.net server application.

On the asp.net side, I created a IHttpHandler. I want to send data back and forth on one HTTP request.

I tried the following code which run an infinite loop inside function ProcessRequest(). The client side opens a socket connection and send HTTP POST request.

I am not sure how asp.net work. In HTTP POST I have to specify Content-Length, I tried a small value, like 20, then asp.net handler can only get 20 bytes in the inputstream. I tried to use 4096000 bytes(close to the maximum IIS allowed), then the inputstream cannot get anything, it seems IIS is waiting for all data(4096000) to come from client side before it gives the handler a chance to read from the socket.

public class DeviceDataHandler : IHttpHandler
{
public void ProcessRequest(HttpContext context)
{
try
{
Stream inputstream = context.Request.InputStream;
Stream outputstream = context.Response.OutputStream;
/loop forever until exception is thrown
while (true)
{
ProcessData(inputstream, outputstream);
}
}
catch (Exception ex)
{
ZenLog.logError("DeviceConnector exception: " + ex.Message);
}
}
public bool IsReusable
{
get
{
return true;
}
}
}

View 1 Replies

Web Forms :: Data Connection Can't Open In Windows

Apr 2, 2010

I have used vs 2008 to develop an asp.net application.

This application can run in windows xp, windows vista, but can't run under windows 7.

When the application want to new an database connection, it retun null.

I am using sqlserver 2005 express sp3 as my database.

The connection is :

Data Source=./SQLEXPRESS;Initial Catalog=mydb;Integrated Security=True

How can I do?

View 6 Replies

DataSource Controls :: Open / Close Connection To DB?

May 4, 2010

When I'm using this to open Connection to DB,

Do I need to Close it at the end?

Or by using it, it close by itself?

using (SqlConnection cnn = new SqlConnection(connectionInfo))

View 2 Replies

Many Users Can Open A Connection To Microsoft Access?

Mar 20, 2011

how many users can open a connection to Microsoft Access database simultaneously ?I am using asp.net 4.0 to write my application.

<add name="E_ShopAccessConnectionString" connectionString="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=|DataDirectory|
eport.mdb;Persist Security Info=True" providerName="System.Data.OleDb"/>

View 4 Replies

Data Controls :: What Is The Use Of Connection Open Method

Jul 5, 2013

we usually open a connection by con.open() and close the connection by con.close().when we create a method like,

public void conopen()
{
if(connectionstate.open)
con.open();
con.close();
}

what is basically the use of this method..??...why we create this method when we have co.open() and con.close();

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved