AJAX :: Button Not Preserving ID After Partial Postback In Updatepanel?

Oct 8, 2010

I've created a dynamic button from another control outside of the update Panel. The button is given an ID and such. When the button is click, a postback occurs and I've re-created this button during Page_Init, Page_PreLoad, and Page_Onload and NONE of them is preserving the value.

The only way for me to find the control was to look at the Page.request.form's allkeys and compare the string with a any text string that contains: Button. Because I ID'd teh button as: ButtonRow_0Col0. But the actual ID is null. However, when traversing through page.request.form, the allkeys shows that ID with no problem.

So how come the actual ID is lost after a partial postback yet, the page.request.form's allkeys can pull out its allkey's value??

View 4 Replies


Similar Messages:

AJAX :: Textbox Not Writable After Partial Postback Of Updatepanel?

Mar 4, 2010

i got a strange problem. my project was ok before implimenting ajax. i have just implimented ajax in one page only with Tabcontainer and updatepanels only nothing else. almost all controls are devided into different Tabs with respective update panels.

mostly it is working ok. but the problem is :

1. in some controls i am not able to write anything even the control is "Enabled=True" and focus is on the same control after partial postback.

2. and as soon as i press Tab control goes to Address bar.

3. some time tab key is also not working.

here some code :

[Code]....

Here the Logic :

as soon as i type inception date; expirydate is automatically calculated and focus should come to sumassured. after this it should allowed to enter sumassured amount, which is not allowing to write.

As soon as i change tab and come back to original tab then i can write values normaly.

View 4 Replies

AJAX :: Call JavaScript Function After UpdatePanel Refresh (Partial PostBack) Is Completed

May 7, 2015

[URL] .... am using this functionality in my project and it is working very fine but i am facing very strange issue while using this.

The above functionality is not working when we place dropdownlist and textbox inside updatePanel and ModalPopupExtender

The .aspx page where i am using ModalpopupExtender and UpdatePanel for DropDownList and Textbox is below

<%-- *************************** MODAL POPUP EXTENDER ***************************************************** --%>
<asp:HiddenField ID="HiddenField3" runat="server" />
<asp:HiddenField ID="HiddenField4" runat="server" />
<cc1:ModalPopupExtender ID="ModalPopupExtender1" runat="server" PopupControlID="Div6" TargetControlID="HiddenField3"
BackgroundCssClass="modalBackground" CancelControlID="bclosemodalpopup" >
</cc1:ModalPopupExtender>

[Code] ....

The above code is not working with UpdatePanel but it is working if we remove DropdownList and Textbox from updatepanel.

The javascript code which i am using is below

<script type = "text/javascript">
var ddlText, ddlValue, ddl, lblMesg;
function CacheItems() {
ddlText = new Array();

[Code] .....

View 1 Replies

AJAX :: JQuery MultiSelect DropDownList With CheckBoxes Not Working After UpdatePanel Partial PostBack?

May 7, 2015

In my previous question mentioned below.

My previous question mentioned

[URL]

Now i am having two dropdown one is asp dropdownlist and 2ND is MultiSelect-DropDownList-with-CheckBoxes. 2nd dropdown is populating on selected value of first.On page load it works fine. Now, on change of value in dropdown, selected index change 2nd dropdown (MultiSelect-DropDownList-with-CheckBoxes) fills but i see a list box instead of dropdown.

View 1 Replies

AJAX :: Using Multiple TinyMCE Rich TextBox Editor Inside UpdatePanel Across Partial PostBack

May 7, 2015

I saw article [URL] .... that is working fine 

I have a page with multiple textbox multiline 

When I apply your code for three textbox then it show only one editor and remain same as simple textbox and if i click on button it flickering ...
 
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:TextBox ID="TextBox1" runat="server" TextMode="MultiLine"></asp:TextBox>
<asp:HiddenField ID="HiddenField1" runat="server" />

[Code] ....

View 1 Replies

How To Know Which UpdatePanel Causes The Partial PostBack

Jan 31, 2011

In a page contains two UpdatePanels, How can I know which UpdatePanel causes the partial PostBack ?

I mean in the Page_Load event handler.

This is my code:

[Code]....

View 2 Replies

AJAX :: Button Forces Postback In Updatepanel Inside Popup?

Sep 19, 2010

I have an update panel which is inside a Modal Popup Extender. When I click the Refresh Report button it always calls a postback. I need to stop it from posting back.

View 2 Replies

Updatepanel - Maintain Panel Scroll Position On Partial Postback?

Mar 13, 2011

I have a gridview that putted in ASP.NET Panel. both of panel and Gridview are in an UpdatePanel. there is a column in gridview that Causes Partial PostBacks. i want to Maintain Panel Scroll position on those postbacks.

View 1 Replies

Javascript - Register Script After Partial Page Postback (UpdatePanel)

Aug 26, 2010

I have a simple form (textbox, submit button) which is wrapped in an update panel.

[Code]....

I type some text in the textbox, click submit, then the server creates a database record and returns an object, which has properties like ID, Name, URL, Blah, etc. These are the values that the script requires.

So if i were to call a web service from the client-code, in order to get the values that were just created, i would need to do some hacks (get last record modified that has the value of the textbox). Not ideal, and neither is two AJAX calls for one form post. (update panel postback, then web service call).

View 1 Replies

LinkButton Inside UpdatePanel Disappears After Partial Page Postback?

Mar 24, 2010

I have a linkbutton inside a updatepanel and when the update panel does a partial page rendering, the linkbutton disappears.

<asp:UpdatePanel ID="up" runat="server" ChildrenAsTriggers="true" UpdateMode="Conditional">
<ContentTemplate>
<asp:DropDownList ID="drp" runat="server" AutoPostBack="true" CausesValidation="true">
<asp:ListItem Text="" Value="" />
<asp:ListItem Text="a" Value="a" />
<asp:ListItem Text="b" Value="b" />
<asp:ListItem Text="c" Value="c" />
</asp:DropDownList>
<asp:LinkButton ID="link" Text="abc" runat="server" />
</ContentTemplate>

I think that is because the link button is rendered using a script and that script is not run after the post back.

View 1 Replies

Javascript - Selecting The Contents Of TextBox In An UpdatePanel After A Partial Page Postback

May 19, 2010

I am having problems selecting the text within a TextBox in an UpdatePanel in IE 8. Consider a very simple page that contains a single UpdatePanel. Within that UpdatePanel there are two Web controls:

A DropDownList with three statically-defined list items, whose AutoPostBack property is set to True, and
A TextBox Web control

The DropDownList has a server-side event handler for its SelectedIndexChanged event, and in that event handler there's two lines of code:

[Code].....

View 2 Replies

JQuery :: How To Save State Of A Toggle Button After Partial Postback

Oct 7, 2010

lets say you have the toggle buttons from this page: [URL]

and you put it in a UpdatePanel AJAX... so lets say on a partialpostback.. when you re-create teh controls on server-side, the state of whether or not those buttons were pushed is long-lost and gone.. so how then how do you remember those states?

Can I save each button state into viewstate or session state? regenerate each button then call the javascript function to change its color-state depending on the session state variable?

View 2 Replies

AJAX :: Using Updatepanel For Partial Page Rendering?

Jul 20, 2010

I am using a table and within the table i have gridview and textbox controls. On the rowcommand i am populating the data in text boxes. On top of the table i am using updatepanel for partial page rendering. When i select a row from gridview the text boxes are not populating, the table disappears.Below is the code

[Code]....

View 3 Replies

AJAX :: How To Trigger Updatepanel Postback From Another Updatepanel

Mar 4, 2011

I have a web user control with one updatepanel (pnlUpdate_2), some controls and one apply button. I display the web user control as a modalpopup in my default page. In my default page i have an updatepanel (pnlUpdate_1) with a gridview and I modify that gridview with the apply button of the web user control. The web user control is for made a custom search of the gridview data. I have a problem with both updatepanels. If I set the updatemode as always in one of them (pnlUpdate_1) and the other as conditional (pnlUpdate_2), the pnlUpdate_1 make a postback in the pnlUpdate_2; I'm not an expert on this but I think that's why the pnlUpdate_2 disappear and reappear after postback of some controls in that updatepanel (not the apply button, it close the modal after postback). I try all the combinations and the problem persists. So I put both updatepanels as conditional and in some way it works; now the problem is that when I click the apply button in pnlUpdate_2 to modify the gridview in pnlUpdate_1 the pnlUpdate_1 not made the postback I get the pnlUpdate_2 postback when I use some control inside the pnlUpdate_1.

How can I postback the pnlUpdate1 from pnlUpdate_2 with the apply button?

View 3 Replies

Data Controls :: Need Partial Page Postback When Add Button Is Inside Gridview Is Clicked

Jun 2, 2012

i have a gridview with itemtemplate, edittemplate and footer template placed in update panel..i have placed Add button to insert new record in the footer template.i want  partial page postback when  Add button is insside gridview is clicked.

<asp:UpdatePanel ID="UpdatePanel1" runat="server">
    <ContentTemplate>
<asp:GridView ID="grdMatReq" runat="server" AutoGenerateColumns="False" 
        ShowFooter="True" Font-Size="Small"
        AllowPaging ="True" onrowediting="EditMatReq" 

[code]....

View 1 Replies

AJAX :: Partial Postback And Update Panel?

Dec 4, 2010

i have one label out of update panel and one button inside update panel. in button click event i update the label text. when i run the code and click on button then partial postback occur and button click event fire but label value is not change. if i put the label too in the update panel then label value change at the time of button click. i do not understand why label value is not getting updated. suppose if i want that label should stay out of update panel and label value should change at the time of partial postback then how to write the code. i dont want put the label in any update panel.

View 5 Replies

AJAX :: Partial Page PostBack Not Firing?

Mar 14, 2011

I have a few Link Buttons on my AJAX enabled page, all basically the same:

[Code]....

Here's the OnClick method they're attached to:

[Code]....

I ensure these LinkButtons trigger Async in my Page_Load method:

[Code]....

Then on the page there are three UpdatePanels (as called in the btnCampus_Click method). All are similar to this (only the ContentTemplate changes):

[Code]....

why the UpdatePanel's aren't triggered when clicked. I've been using UpdatePanels for a long time, but I can't seem to figure this one out.

View 3 Replies

AJAX :: Partial Postback Not Clearing Control's?

Feb 20, 2011

After Partial Postback i am trying to clearing my textbox'e with value's but it's not clearing ??

if i don't want give another button for resetting the value

my code

[Code]....

My Mrkup-


[Code]....

View 2 Replies

AJAX :: Implementing IHttpAsyncHandler With Partial Postback?

Jan 20, 2011

I have a web app which implements IHttpAsyncHandler for handling web service calls asynchronously, done according to this web page:

[URL]

Now, my page is rather complex with many update panels, so when I initiate the AsyncHandler with BeginProcessRequest, the page does a partial postback, then when EndProcessRequest is called, another partial postback, everything is fine so far...

But when I navigate around my page and causes a partial postback between BeginProcessRequest and EndProcessRequest, nothing gets updated when EndProcessRequest is called...

In debug, EndProcessRequest IS CALLED in the server codebehind, but nothing updates clientside... I'm not even sure if it even caused a partial postback...

I'm a pretty big noob when it comes to this Async stuff, and I just followed the site above, so I'm guessing it maybe something behind the principle of how IHttpAsyncHandler works.

View 3 Replies

Determining Which Button Caused The Postback In An UpdatePanel?

Oct 18, 2010

In Page_Load, Request["__EVENTTARGET"] is an empty string.IS there some way I can find out which button triggered the postback before hitting the buttons event handler

View 2 Replies

Forms Data Controls :: Preserving Selected Row On Gridview And Datalist On Postback?

Jan 12, 2010

I have a GridView and a DataList on the same page in a father/son relationship.I am trying to have the selected row on the GridView be in 'focus' on postback so if a person toward the bottom of the list is selected then the scroll position is maintained.I am trying to do the same with a DataList too.Heres my javascript.

[Code]....

and I have this around the GridView :

[Code]....

and this around the DataList:

[Code]....

The funny thing about this code is when I comment out the DataList portion, the GridView scroll postition works, when I comment out the GridView javascript portion the DataList scroll postion works.Is there a special way to make sure both of these can work or is it a javascript issue?

View 5 Replies

AJAX Partial Postback / Dynamic JavaScript Values?

Jan 20, 2011

I am working with a user control which is inside an UpdatePanel. The user control uses swfobject to add a flash object to a div in the user control. Part of the functionality of the user control is it allows the user to change 'channel'. The channel is set and handled in the code behind hence the call in the JavaScript below to <%=channel%>.

The problem I have is that when the new channel is saved, the JavaScript code below is still pointing to the old channel. The only way I can fix this is to refresh the page via the code behind, but I'm thinking there must be a better way to do this..

[Code]....

View 2 Replies

Ajax - Wiring Up JavaScript Handlers After A Partial Postback?

Jun 1, 2010

I am trying to use LinkButtons with the DefaultButton property of the ASP.NET Panel in an UpdatePanel. I have read and used the various other answers that are around describing the wiring up of the click event so that a full postback is not done instead of a partial postback. When the page loads, I wire up the .click function of the LinkButton so that the DefaultButton property of the ASP.NET panel will work.

This all works fine, until you bring an UpdatePanel into the mix. With an UpdatePanel, if there is a partial postback, the script to wire up the .click function is not called in the partial postback, and hitting enter reverts to causing a full submit of the form rather than triggering the LinkButton.

How can I cause javascript to be executed after a partial postback to re-wire up the .click function of the LinkButton? I have produced a sample page which shows the problem. There are two alerts showing 1) When the code to hook up the .click function is being called, and 2) When the .click function has been called (this only happens when you hit enter in the textbox after the event has been wired up). To test this code, type something in the textbox and hit Enter. The text will be copied to the label control, but "Wiring up Event Click" alert will not be shown. Add another letter, hit enter again, and you'll get a full postback without the text being copied to the label control (as the LinkButton wasn't called). Because that was a full postback, the Wiring Up Event Click event will be called again, and the form will work properly the next time again.

This is being done with ASP.NET 3.5.

Test Case Code:

[Code].....

View 1 Replies

AJAX :: Hammering Partial Postback With A Slider And Javascript?

Nov 2, 2010

I have a JavaScript slider which calls the follow functions:

var prm = Sys.WebForms.PageRequestManager.getInstance();
prm._doPostBack('ZoomButton1','');

The ZoomButton1 is tied to an UpdatePanel and does a partial postback. In this case, when the Slider is constantly be dragged left and right, the value is changing/updating and JavaScript is hammering the postback extremely fast. It is so fast, the server sometimes but not always reports a pagerequest manager error, I believe.

I know that I can set it to just update my data (updatepanel) on a button_release or a mouse-up.. but occasionally, I still encounter the pagerequest manager error.

View 3 Replies

AJAX :: PasswordStrength Does Not Work After Partial Postback In Safari?

Feb 9, 2010

I have a Panel, which contains some form elements and is Visible=False on page load. When a button is pressed the Panel is made visible (the button and the panel are inside the same UpdatePanel). I have a PasswordStrength control within this Panel and on Safari it does not work once the Panel is made Visible=True. All other browsers work perfectly.

I've tried adding the PasswordStrength control at runtime but the same thing happens...

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved