I am using an updatepanel and a grid is placed within the same.Now,I have a checkbox corresponding to each row of the grid.If I check it,say corresponding to one row and click a button(placed outside the panel), a popup will be opened which is a separate aspx page having its own functionality.
The requirement is like I need only the panel to refresh not the whole page.
I have a web application that shows a page containing between 6 and 20 UpdatePanels, contained with Custom Web (.ascx) Controls.
You can see an example of such a page here: [URL]
The problem I'm getting is that when the user FIRST clicks any of the radio-buttons on any of the controls in the page, ALL the radio buttons that have an active selection ALSO fire an rb_CheckChanged event (see application log below). On subsequent radio-button clicks, only that RB fires the event (as expected).
This behaviour is having a dramatic impact on performance. The page loads quickly, and a "normal" RB click provides an AJAX update correctly within 1 second. The problematic first RB click, however, takes up to SIX seconds to process, which is unacceptable from a user experience standpoint.
Developed in VS.NET 2008, ASP.NET 3.5. Also I converted the "Web Site" solution to a "Web Application" (pre-compiled) and got the same performance (still too slow). Release builds run only marginally faster than debug builds.
Why would a single RB selection change cause all RB's that have a "selection" set on them to also fire? (The "selection" is determined through database settings every time the control is populated, which is called from within the parent page control's Page_Load function. This selection is determined also at first page load, since all the controls get populated then, so why would the clicking of an RB cause them all to fire an event, and only once? That's what I don't get...)
This upload is working. But why the page is getting refreshed? this is not partial post back and instead it 's full post back. i have read the articles for the fileuplaod with issue inside the update panel. is there any way to achieve this asynchronous upload on button click?
I don't want to use the Ajaxtoolkit Asyncupload because that will upload (Ref : [URL] ....] the moment when we seelct the file itself which i don't want to do that. i need to do on the button click event.
I have two controls, each placed in their own <div> and <UpdatePanel> on my form. I am having trouble getting the partial page postback to fire after the file upload has completed. I have not used the __doPostBack approach before so I'm not sure if I am heading in the right direction.
I'm having trouble with IE8. The page works fine in Safari and Firefox, but in IE8, I can't get the Submit button to trigger postback - Async or Full. I tried registering the Submit button for Full Postback:
i have one label out of update panel and one button inside update panel. in button click event i update the label text. when i run the code and click on button then partial postback occur and button click event fire but label value is not change. if i put the label too in the update panel then label value change at the time of button click. i do not understand why label value is not getting updated. suppose if i want that label should stay out of update panel and label value should change at the time of partial postback then how to write the code. i dont want put the label in any update panel.
I have a web app which implements IHttpAsyncHandler for handling web service calls asynchronously, done according to this web page:
Now, my page is rather complex with many update panels, so when I initiate the AsyncHandler with BeginProcessRequest, the page does a partial postback, then when EndProcessRequest is called, another partial postback, everything is fine so far...
But when I navigate around my page and causes a partial postback between BeginProcessRequest and EndProcessRequest, nothing gets updated when EndProcessRequest is called...
In debug, EndProcessRequest IS CALLED in the server codebehind, but nothing updates clientside... I'm not even sure if it even caused a partial postback...
I'm a pretty big noob when it comes to this Async stuff, and I just followed the site above, so I'm guessing it maybe something behind the principle of how IHttpAsyncHandler works.
I am trying to use LinkButtons with the DefaultButton property of the ASP.NET Panel in an UpdatePanel. I have read and used the various other answers that are around describing the wiring up of the click event so that a full postback is not done instead of a partial postback. When the page loads, I wire up the .click function of the LinkButton so that the DefaultButton property of the ASP.NET panel will work.
This all works fine, until you bring an UpdatePanel into the mix. With an UpdatePanel, if there is a partial postback, the script to wire up the .click function is not called in the partial postback, and hitting enter reverts to causing a full submit of the form rather than triggering the LinkButton.
var prm = Sys.WebForms.PageRequestManager.getInstance(); prm._doPostBack('ZoomButton1','');
I know that I can set it to just update my data (updatepanel) on a button_release or a mouse-up.. but occasionally, I still encounter the pagerequest manager error.
i got a strange problem. my project was ok before implimenting ajax. i have just implimented ajax in one page only with Tabcontainer and updatepanels only nothing else. almost all controls are devided into different Tabs with respective update panels.
mostly it is working ok. but the problem is :
1. in some controls i am not able to write anything even the control is "Enabled=True" and focus is on the same control after partial postback.
2. and as soon as i press Tab control goes to Address bar.
3. some time tab key is also not working.
here some code :
Here the Logic :
as soon as i type inception date; expirydate is automatically calculated and focus should come to sumassured. after this it should allowed to enter sumassured amount, which is not allowing to write.
As soon as i change tab and come back to original tab then i can write values normaly.
I've created a dynamic button from another control outside of the update Panel. The button is given an ID and such. When the button is click, a postback occurs and I've re-created this button during Page_Init, Page_PreLoad, and Page_Onload and NONE of them is preserving the value.
The only way for me to find the control was to look at the Page.request.form's allkeys and compare the string with a any text string that contains: Button. Because I ID'd teh button as: ButtonRow_0Col0. But the actual ID is null. However, when traversing through page.request.form, the allkeys shows that ID with no problem.
So how come the actual ID is lost after a partial postback yet, the page.request.form's allkeys can pull out its allkey's value??
I have a Panel, which contains some form elements and is Visible=False on page load. When a button is pressed the Panel is made visible (the button and the panel are inside the same UpdatePanel). I have a PasswordStrength control within this Panel and on Safari it does not work once the Panel is made Visible=True. All other browsers work perfectly.
I've tried adding the PasswordStrength control at runtime but the same thing happens...
I'm inplementing the Cascadingdropdown control from the toolkit. That's all working fine. The user makes their selection from the dropdown and submits the page to return search results to a listview control.
However, I've noticed that all the dropdowns re-populate themselves when the page is posted back. There is no need to reload the controls on a postback, how can I stop that please as it's very annoying?
So I have two UpdatePanels. I am dynamically creating server-side buttons in UpdatePanel2. When the buttons come out, they are not hooked to the asynchronoustriggers of updatePanel1.
So how can I dynamically add these triggers of these newly dynamically created buttons so that clicking these buttons will only cause a partial postback to UpdatePanel1 ? Right now, when I click these buttons, it causes a partial-postback refresh to UpdatePanel2 (the panel itself that which the controls reside in)
I have used jQuery to invoke an AJAX webmethod in c#. This webmethod runs a query and stores the resulting information in a session variable. I have a gridview that has an objectdatasource that uses the session variable with the selectmethod to then populate the gridview with data from a query. I need the final piece to get the gridview to databind() again with the new value.
I have a simple form (textbox, submit button) which is wrapped in an update panel.
I type some text in the textbox, click submit, then the server creates a database record and returns an object, which has properties like ID, Name, URL, Blah, etc. These are the values that the script requires.
So if i were to call a web service from the client-code, in order to get the values that were just created, i would need to do some hacks (get last record modified that has the value of the textbox). Not ideal, and neither is two AJAX calls for one form post. (update panel postback, then web service call).
I have a GridView control inside one Update Panel and a detail section inside another Update Panel. Initially, the detail section is hidden and when a GridView row is selected, the Detail panel becomes visible. Everything works fine except that if the GridView contains more rows and covers most of the user's screen, screen doesn't shits to the start of Detail section.I can use anchor but was just wondering if there is any other way of achieving this. Also the Detail section has multiple nested Update Panels and if I use anchor, then any of the child Update Panel's update will move the screen to the beginning of the detail Section.
Now i am having two dropdown one is asp dropdownlist and 2ND is MultiSelect-DropDownList-with-CheckBoxes. 2nd dropdown is populating on selected value of first.On page load it works fine. Now, on change of value in dropdown, selected index change 2nd dropdown (MultiSelect-DropDownList-with-CheckBoxes) fills but i see a list box instead of dropdown.
i have a gridview with itemtemplate, edittemplate and footer template placed in update panel..i have placed Add button to insert new record in the footer template.i want partial page postback when Add button is insside gridview is clicked.