Configuration :: How To Deploy An Application Containing A Website And Console Application On IIS

Jul 20, 2010

I have an application which has a website and a project. The project contains an executable file which I'm trying to run as a process from the website's Global.asax file's application_start(). When I run this application from localhost, everything runs smoothly but when I deploy the application on IIS, application_start's code is executed and I can see the process name in the taskmanager but I cannot see the window which the console application normally starts in (when i run the application on localhost) and neither is the code executed.

Here's what I'm doing:

-- copied website and project in wwwroot
-- made a virtual directory of the website
-- when i run the website, I see the process in taskmanager but the code is not executed.

I am new to deployment and IIS, and would really appreciate I someone could tell me what i'm missing

View 2 Replies

Similar Messages:

Web Config - Share Configuration Between Console Application And Web Application

Jul 26, 2010

I have a web.config file defined in my web application. I have many different settings configured there. I have another project, this time a console application. I'd like to read several configurations from my web.config file. How can this be done?

View 1 Replies

Configuration :: Deploy Application That Uses Application Services Membership Provider

Aug 25, 2010

Apologies if this seems obvious, but after a week searching I can't find a clear answer to my problem.

I have developed an application in Visual Web Developer 2010 Express that uses the application services membership provider. It works well in development on my machine (data in the ASPNETDB.MDF database).

I packaged my application and deployed the relevant files with FTP to my shared hosting provider.

I took a copy of the ASPNETDB.MDF and restored it to the SQL Server 2008 on my shared hosting. I can connect to this through the Database Explorer in Visual Web Developer, but it doesn't contain any schema or data.

I know once I have the database in production I will have to make sure the connection string in web.config is poiting to it, but I don't know how to get the DB to production in the first place.

View 2 Replies

C# - Include Another Project Console Application Exe In A Website?

Mar 30, 2011

I've got two projects: a .Net 4.0 Console Application and an Asp.Net 4.0 Website (they are in the same solution). Now I'd like to include the console application (its .exe) in the web application, because I need to run it on the server when the user clicks on a certain button.

Now I would like to include it in a way that the console application will be updated whenever I recompile the solution, so it stays up to date.

So... how can I include my .exe in my web app?

View 2 Replies

Configuration :: How To Make Console Application Usable

Jun 1, 2010

I want to create a business object from the console application for use with a control. here is my console application:


View 10 Replies

Configuration :: Console Application's Published Version Appconfig File

May 26, 2010

After publishing the console application. We changed few connection strings related values in the app.config file, but the values changed is not been reflected in the published version.

What might be the cause for not reflecting the values which has been changed ???

View 2 Replies

Configuration :: How To Deploy Web Application

Aug 1, 2010

I developed a web application using VS2008 and sql server2005. I don't know how to make my project live. I got the domain name also. But i don't know how to deploy. I don't know how to copy in that.I'll give you the details also to access the ftp. how to upload in it. I want the correct instruction to deploy the application.

View 8 Replies

Configuration :: Deploy Application On Iis 5

Mar 16, 2011

i'm struggling with this error for hours... i have an application that uses sql server express ,entity framework and was built with web developer. when i try to browse the app i get a: The specified named connection is either not found in the configuration, not intended to be used with the EntityClient provider, or not valid.

View 4 Replies

Configuration :: Deploy Web Application On IIS?

Mar 23, 2010

How can I deploy my web application and configure on IIS server.

View 2 Replies

Configuration :: Trying To Deploy Application?

Jul 8, 2010

Ia m trying to deploy an application.The application is running without any errors and I published the website also.Now I want to ceatethe package of the application.So I added one web setup project.But I couldn't build the web setup project.(1 Build succeeded,! failed)I couldn't able to resolve this problem.I have one webservice and database also.Anyway,I installed this websetup.After that I opened through the browser,error came us global file can not be added.

View 1 Replies

Configuration :: Is Is Possible To Deploy Web Application To CD-ROM

Mar 18, 2010

Is is possible to deploy application to CD-ROM and have it in Computer Based Training Format (CBT) with no requirements for user to install anything on computer ?

1) User takes CBT and places in laptop

2) application opens and runs from CD, as if user pointed browser to it.

3) have considered Cassini, but I don't know if is something easier with visual studio 10? Cassini requires intall by user, I don't want that.

4) am willing to try anything as long as it is fee ( i.e. using my trial versions of VS 10, or VS 2005).

5) or is my only option to convert to pure html--- because that I know I can do from CD to make a CBT.

View 3 Replies

Deploy Application In The Same Website As Sharepoint

Jul 15, 2010

I am trying to deploy the Bugtracker.NET tool [URL], which is a normal ASP.NET 2.0 application, into the default web site of an IIS which already has Sharepoint installed in it. The OS is Windows Server 2008 R2, IIS 7.5 and Sharepoint Services 3.0. The question is that when I execute the application, I get a NullReferenceException because HttpContext.Current.Session is null, and I think that this could be due to a problem with the configuration of the web site, as the application runs perfect in web sites with no Sharepoint installed.

I already know that Sharepoint customizes the web site with handles, modules and so on, that all applications in the web site inherit, modifying their behavior. I have already given to the ASP.NET application Full trust level, enabled Anonymous authentication and InProc session state, but I am still getting that HttpContext.Current.Session is null. Even changing the app pool from Wss3AppPool to DefaultAppPool does not succeed. Maybe someone could tell me which settings do I need to tweak in the web site in order to avoid this exception.

View 1 Replies

Configuration :: Deploy 1.1 Application On Live

Feb 8, 2011

We have a web application on ASP.NET 1.1. I have made some changes on the application on local & i have to deploy it on live. How do i do it? Can i copy the pages that i have changed on live & re-compile the entire project there? Is it good idea as we dont have any test server.

View 1 Replies

Configuration :: Deploy Web Application Using VS2010

Mar 31, 2011

I'm new to ASP.NET. I have created a web application project using VS2010. I tried to deploy it to my web server (IIS7) based on article on the internet (eg. link) but I've got an error:


View 3 Replies

Configuration :: Unable To Deploy 4.0 Application

Dec 17, 2010

I have been developing a .net web application for a while now. I had my application installed on a test server and everything was running smoothly. Now that the application is almost ready for deployment to end users, I obtained a brand new web server to host the application. I installed SQL server 2008R2, copied over my database and after a bit of messing about with conection strings and SQL logins, everything seemed to be working fine from debug. When I tried to install my app to the new server, I was prompted that I would need to install .net 4.0 which I then did. Gave the server a reboot and tried to install the app again - this time I got the following error before the install rolled back incomplete...

Could not open key: microsoftsoftwareASP.NET4.0.30319.0 verify that you have sufficient access to that key, or contact your support personel. I checked IIS and the default application pool was set to net 2.0, I changed this to 4.0 and ran the install again but got the same error. Could anyone offer any advice here as I am under pressure to get this system up and running.

View 2 Replies

IIS Configuration :: 8.5 - Deploy Web Application On Localhost

Apr 27, 2016

I have to check the precompiled web application on IIS 8.5 via localhost. So, What are the steps regarding how to configure and deploy precompiled web application on IIS 8.5

.Net framework is 4.0 & windows is 8.1 ....

View 1 Replies

Web Forms :: Deploy An Application In Existing Website?

Nov 4, 2010

What are the options available to call another web applications hosted in the same server. Eg: i have a application App1 and App2 hosted on the same server.i just wanted to call App2 from App1 how would i do it.

The most important point is that I can not change the url on the address bar to call the page of the 2nd web application.

Whatever I have achieved so far is I have added a link to my 1st application which redirects to the 2nd application, but it is changing the url on the address bar, I want to redirect to the 2nd application from within the 1st application.

View 3 Replies

Configuration :: How To Deploy Web Application That Has Multi Projects

Oct 6, 2010

I want to deploy web application which contains many projects in one solution; data layer and business logic and UserInterface (which contains the login.aspx) projects in addition to Subsonic folder for dealing with oracle Database Now, I want to run (deploy) this application in a remote IIS server I tried to copy all the solution in all its projects to the virtual directory at the IIS but it didn't work How can I do

View 6 Replies

Configuration :: How To Deploy Web Application On Remote Server

May 4, 2010

I have developed web application i need to deploy it on remote server.i am using 3.5 ,c# 3.0 and visual studio 2008,sql server 2005.using visual studio 2008 how i can make msi file to deploy application on server

View 5 Replies

Configuration :: Deploy Application In Multiple Servers

May 17, 2010

We have built an application according to 3 tier architecture, but Data Tier and Application logic lies on the same server. Our client needs that to be deployed in 2 different servers. Only front end in web server DAL & BLL in app server. Database is in different server. All 3 servers are at different physical locations. How can we commuicate between these servers and our applicaton tiers? is there any option in IIS so that we can deploy only back end code in another server? what is the best approach to communicate between different application tiers when they are physically apart?

View 2 Replies

Configuration :: Deploy Application Using Excel Libraries?

Nov 30, 2010

I have some code in the web application which reads data from excel and saves to the db, and also functionlaity to generate new excel files, based on user input. ITs working ifne in local, but once deployed on the test server, i get the error

Could not load file or assembly 'Microsoft.Office.Interop.Excel, Version=, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified

For this I tried to insall the PIA 2003 version on the server, The server has only .NET 2.0 framework. FOr the PIA to install what are the requirements? A Microsoft Office Product should be present on the server?

When I tried to install on the server, I got the message "Product: Microsoft Office 2003 Primary Interop Assemblies -- Configuration completed successfully", but whn looked in GAC, the Interop excel dll was not there.

Whats worng with the installation? Whats the minimum requirement on the server to install the PIA?What are the oher options to copy PIA to the GAC in the server?

View 1 Replies

Configuration :: Deploy 3.5 Application On Windowserver 2003?

Aug 3, 2010

i havemy application developed in 3.5 with sqlserver 2005.

i have directories as following


whole code is in UOGERP except default i want to deploy it on windowserver2003 which i setup on intel Xeon machine.

i use to publish web site using visual following manner.i created a directory in c:Inetpubwwwroot named HRM and then publish in it using VS.then i go to iis and right click on defaultWebsites and then new websites. in description I Wrote HRM.than press next button and than give the path asC:InetpubwwwrootUOGERP.

than right click on HRM in IIs And take properties of folder.tham in tab select version to 2.77897 some thing.than in document tab add default.apsx .but it gives some time error 404 and some time error 403.

View 1 Replies

Configuration :: Deploy Application To Web Server With MySql DB?

Jul 31, 2010

I have developed a web application with ASP.Net 2.0 (VB Code Behind) and I am using My SQL as database.

I wish to sell the web application from my other website to multiple users. What would you suggest to be the best way to deliver this application? Fact is I can compile the front end script and provide the compiled version but I am not sure how to provide the associated MySQL database to them. I need to make sure that the buyers are not able to alter any code in the application or modify the preset data in the MySQL database. I do not wish to use the Setup Based deployment method as it will require the buyers to have administrative rights on the server, which may not be available on shared hosting.

But at the same time they must be able to get the web application up and running with minimal effort. I must be honest with you that I have developed only HTML based static websites till now and this would the first time I am launching an ASP.Net application.

View 1 Replies

Configuration :: MVC Setup And Deploy Application - VS2010?

Nov 3, 2010

what are the steps to create a setup in mvc2.0 and VS2010 application and deploy it on server.

View 10 Replies

Configuration :: Deploy An Application With A Sql Server Express Db?

Mar 20, 2011

for the last couple of days i've been trying to deploy an application that uses a sql express db on to my iis.up until now i was trying to upload it onto iis 5.1, but now i a brand new iis7.5 but i still get this annoying error:An attempt to attach an auto-named database for file C:application_nameApp_DataDatabase1.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.needless to say that there is no database with this name on my computer. i've set the application pool to .net framework 4.0.

View 2 Replies

Copyrights 2005-15, All rights reserved