Configuration :: Run An Exe File Located At Web Server Using Application

May 14, 2010

I am running an exe file located at Server named Wget (Command line Web Crawler) using application.

When I run it from Visual Studio Development environment it run properly and gives required results.

But when I run it from the IIS Server its process run properly but terminated immediately and doesn't give required results and there is no any kind of exception.

View 3 Replies

Similar Messages:

Web Forms :: Get File Path Into Application Where File Is Located In Another Application?

Mar 30, 2010

i have two application suppose wwwroot/one and wwwroot/two.

there is one .aspx page on "one" application into which i want to get file(.xml) from application "two" and do some work on that file like save,edit,delete etc..

and than save that file into "two" application.


wwwroot/one/MyFile.aspx --> this is file into which i want to access aaa.xml file from application two/File where File is a folder. all file operation is here.

wwwroot/two/File/aaa.xml --> this is xml file which is reside in another application

View 2 Replies

C# - Load A Definition File At Application Start Located In A Virtual Path?

Jun 28, 2010

How do I load a definition file which contains some start up logic at Application_Start?

I only know the virtual path but not the server physical path. How do I convert the virtual path to server path without Server.MapPath()

I am not sure I can access httpcontext or not in the application start stage.

View 2 Replies

Display Post Data From Application To Web Service Asmx That Is Located On Server

Jan 14, 2010

I am trying to post data from application to web service asmx that is located on server! For posting data from application I am using this code:

Public Function Post(ByVal url As String, ByVal data As String) As String
Dim vystup As String = Nothing
'Our postvars
Dim buffer As Byte() = Encoding.ASCII.GetBytes(data)
'Initialisation, we use localhost, change if appliable
Dim WebReq As HttpWebRequest = DirectCast(WebRequest.Create(url), HttpWebRequest)
'Our method is post, otherwise the buffer (postvars) would be useless
WebReq.Method = "POST"
'We use form contentType, for the postvars.
WebReq.ContentType = "application/x-www-form-urlencoded"
'The length of the buffer (postvars) is used as contentlength.
WebReq.ContentLength = buffer.Length
'We open a stream for writing the postvars
Dim PostData As Stream = WebReq.GetRequestStream()
'Now we write, and afterwards, we close. Closing is always important!
PostData.Write(buffer, 0, buffer.Length)
'Get the response handle, we have no true response yet!
Dim WebResp As HttpWebResponse = DirectCast(WebReq.GetResponse(), HttpWebResponse)
'Let's show some information about the response
'Now, we read the response (the string), and output it.
Dim Answer As Stream = WebResp.GetResponseStream()
Dim _Answer As New StreamReader(Answer)
'Congratulations, you just requested your first POST page, you
'can now start logging into most login forms, with your application
'Or other examples.
vystup = _Answer.ReadToEnd()
Catch ex As Exception
End Try
Return vystup.Trim() & vbLf
End Function

View 1 Replies

Crystal Reports :: Show .nfo File Located On Server

Jun 2, 2010

I want to show .nfo file to user.That nfo file is located on server and i am giving it's path in crystal report.

So, when user click on that path of nfo file in crystal report, i want to show that file to user.

I cannot open nfo file in browser.I got this error,

HTTP Error 404.3 - Not Found The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.

I am using .net3.5 and iis7.

View 3 Replies

Web Forms :: How To Configure Generated Log File If Server Is Located On Azure

Dec 23, 2015

I would like to work with NLog to track my application's events.How i can configure the generated log file if my server is located on Azure?

View 1 Replies

Configuration :: File Upload In A Different Server In Application?

Mar 30, 2010

My application in published in web server A. From my application I am uploading file to a folder that is in server B. I have windows authentication in web.config file and all the servers are in same network.

I am getting Access Denied error message when I try to upload a file from my application.

View 1 Replies

Custom Server Controls :: How To Use An User Control In A .cs File Located App_Code Folder

Jun 21, 2010

I create a user control named ExampleControl and add <%@ Register src="ExampleControl.ascx" tagname="ExampleControl" tagprefix="uc1" %> to aa.aspx file So I can use ExampleControl cw = Panel1.FindControl("ExampleControl1") as ExampleControl in the file aa.aspx.cs

Now I hope to use ExampleControl cw = Panel1.FindControl("ExampleControl1") as ExampleControl in a .CS file located App_Code folder, but I get the following error, how can I do?

Error 4 The type or namespace name 'ExampleControl' could not be found (are you missing a using directive or an assembly reference?)

View 1 Replies

Configuration :: "Server Error In '/' Application" When Run An Aspx File On Server Windows 2003 With IIS 6.0

Aug 9, 2010

I am trying to run an aspx file on my server windows 2003 with IIS 6.0. I get the following error. Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local
server machine.

Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".


Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.


View 2 Replies

Show Download Dialog Box In Case Of File Download - Located On Amazon Server

Jan 4, 2010

i am using amazon s3 service. now i want to show download dialog box in my application when user come on download page. i am using amazon sdk.

View 1 Replies

Configuration :: Decompile The Kcp.dll Located In The Bin Folder?

Oct 6, 2010

i have being asked to debug some asp pages.. when i received the folder, i only saw .ascx files.. i found that i need to decompile the kcp.dll located in the bin folder to do my work.. i have VS 2010 and .Net Reflector.. but when i open the dll with the reflector i can only view the codes but i cannot edit it.. any1 able to assist me on this? Summary: 1) Decompile kcp.dll 2) edit the codes and compile it back.

View 2 Replies

Configuration :: Where Is Tool Located In Visual Studio 2010

Jun 22, 2010

Where is ASP.NET Configuration Tool located in Visual Studio 2010?

View 1 Replies

(VS 2008) Resource Can't Be Located (file In Subfolder)

Jul 15, 2011

He has a project set up with the master page and the default.aspx at the root level of the project.He then has several layers of subfolders.On subfolder is DynamicData, and under that PageTemplates and he has a file in there called ListDetails.aspx the uses the same master page on the root. If he sets the ListDetails.aspx as the start page, it says resource can't be found when he runs it.if he sets a redirect to it as:

Response.Redirect("~DynamicDataPageTemplatesListDetails.aspx"), it also says resource can't be found.

View 1 Replies

C# - How To Read A File Located In A Same Folder Where Page Resides

Feb 11, 2011

How do I read a file located in a same folder where my page resides in in ASP.NET (C#)? I have a page called mypage.aspx and I'm trying to read in a file called foo.txt residing in a same directory as this page.

Is there a way to open that file for reading with File.OpenRead()? Providing a relative path like File.OpenRead("foo.txt") fails b/c of the location of the file.

View 3 Replies

Web Forms :: To Point To .aspx File Located In A Different Folder?

Oct 19, 2010

I have an iframe in one of my aspx files which is located in folder1.

I have a line of code in my page iframe1.Attributes.Add("src","filename.aspx");

The filename.aspx file is in folder2, so the above line throws an error..... The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.Requested URL: /folder1/filename.aspxso, its basically looking for the filename.aspx only in folder1, how can I make it point to the other folder. I tried iframe1.Attributes.Add("src","folder2/filename.aspx"), but its of no use.

View 2 Replies

C# - Application Configuration File Not Showing Up

Jun 24, 2010

I created a new project to test the Microsoft Enterprise Library 5.0. It asks me to select the PROJECT - ADD NEW ITEM - APPLICATION CONFIGURATION FILE. For some reason, I don't see the Application configuration file option.

View 2 Replies

Configuration :: Use Web Form In Win Application Like .exe File?

Jul 15, 2010

what is the way to run forms like .exe file in Windows without any explorer

View 1 Replies

Configuration :: Create .EXE File In Application?

Jan 28, 2011

can we create .EXE file in Application.

I think we don't have .but my friend is saying it is possible ...

is it possible to create .exe file and install that application in other system...

View 1 Replies

Configuration :: Merge File Into One Application?

Sep 5, 2010

me and my partner are distant programmer's and now after completing each of our module we want to merge it together and deploy our application , in future we can avoid this delay of merging into a single pc or server ..? so that we can upload or sync our work as soon as we completed it

View 2 Replies

ADO.NET :: How To Get And Write Data To A DB Located On The Server

Jan 2, 2011

I have a silverlight client that i want to get and write data to a DB located on the server . now this is what i did :

1. created the silverlight projecte hosted in asp site project, with wcf enabled .
2. created a DB with some tables in it.
3. created linq to sql classes, and wcf service with operation to fetch data from the DB, added the project the referance .


when i debug it locally on localhost, it workes perfectly, but when i upload all the content to the server i get an error, my guess is that the service is not finding the DB . after I uploaded the content, all i did was change the connection string in my web.config file to the one provided to me by the hosting server.

Webpage error details

User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)
Timestamp: Fri, 31 Dec 2010 12:11:43 UTC
Message: Unhandled Error in Silverlight Application An exception occurred during the operation, making the result invalid. Check InnerException for exception details. at System.ComponentModel.AsyncCompletedEventArgs.RaiseExceptionIfNecessary()
at MyProfile.ServiceReference1.GetMessagesCompletedEventArgs.get_Result()
at MyProfile.MainPage.webService_GetMessagesCompleted(Object sender, GetMessagesCompletedEventArgs e)
at MyProfile.ServiceReference1.ServiceClient.OnGetMessagesCompleted(Object state)
Line: 1
Char: 1
Code: 0

View 3 Replies

Configuration :: Set File For Windows Service Application?

Nov 6, 2010

I have a visual studion 2010 solution with two projects

1 . A class libarary


2. A windows service application


The service application is used to convert .dbf files to xml. The convertion is done using the classlibary project wich is called by the windows service application. This class library project has some values hard coded. like the path to look for the .dbf file

const string sourcePath = @"F:forms";
const string pathToDbfStructure = @"F:formsstructure.dbf";
const string pathToBackupFile = @"F:ackup";

I want to make these hard coded values changable. like moving them to an app.config file. To which project I have to add the app.config file (classlibary or windows service)? How can I use the value from configuration file in classlibrary ?

View 3 Replies

Configuration :: Open File After Deployment Application?

Jun 24, 2010

I have build an application and have use the setup wizard for deployment. Is there some option to add this to my setup:

Open a file? For example a readme.txt file.

View 2 Replies

Configuration :: Application To Read A File Which Is Used By Another Process?

Sep 6, 2010

Is it possible for an application to read a file which is used by another process?

View 9 Replies

SQL Server :: Unable To Open Directory Where Mdf Is Located

Aug 15, 2010

I am trying to attach my database to Microsoft SQL Server Management... I right clicked on Database -> Add and then tried to look into the directory however I cannot expand the directory and when I use the exact hyperlink [...]httpdocsApp_DataurantitDB.mdf

I get an error message of Inetpubvhost[...]httpdocsApp_Dataurantit.mdf failed with the operating system error 5(Access is denied). (Microsoft SQL Server, Error: 5133)

View 3 Replies

Getting The URI Of A Resource Located Server Side In Silverlight?

Jan 10, 2011

I'm very new to silverlight and I'm trying to play a video located in the web project associated with my silverlight application.

What is the best way to get the URI of videos located on the server without hard coding the web address?

View 2 Replies

Copyrights 2005-15, All rights reserved