Custom Server Controls :: Custom Control Image Not Rendering In Visual Studio Design Mode
Apr 25, 2010
I have a simple HttpHandler that generates a dynamic image based on query string parameters and a custom web control that renders an image tag pointing to the handler as its 'src' attribute. All works fine when run in the web server, but at design timethe control displays as the "missing image" icon (red x in a box). The handler is registered in the web.config with a ".ashx" extension. The RenderContents method in the control looks like this:
output.AddAttribute("src", ResolveUrl(string.Format("~/Sparklines.SparkHandler.ashx?stype=pm&w={0}&h={1}&sv={2}&ev={3}&cv={4}&sc={5}&ec={6}&mc={7}&gs={8}",
Width.IsEmpty ? 100 : Width.Value,
Height.IsEmpty ? 15 : Height.Value,
caleStart, ScaleEnd, CurrentValue,
ColorUtils.ColorString(StartColor, true),
[code]...
View 5 Replies
Similar Messages:
Jul 21, 2010
The method GetDesignTimeHtml of the ControlDesigner class should return html markup that will be shown on the page in design time. My problem is that control looks different in different versions of the visual studio. What is the rendering engine visual studio use to render control in design mode?
View 2 Replies
Mar 5, 2010
Why custom Gridview control not render html properlies under <Columns> properly in Visual Studio 2005?
For example:
[code]....
View 1 Replies
May 17, 2010
I am creating custom server control. I have two classes in project. One is main class that render control and another will be used to render content based on condition.I just want to know how to render content from other classes in main class.For example. This isjust an example.My main class code
[Code]....
My TopLeftPane class
[Code]....
My page code on page load event
[Code]....
When I run the page, Header title always getting null. This is a just sample code. I will have more than 20 classes so I dont want to write a code in main class to render whole control.I hope all of you understand my problem.
View 3 Replies
Aug 13, 2010
I have created a custom control from scratch and it works fine as in you can build the project that uses it and it works fine at runtime. Problem is when you go to design view the control shows an error in the place of where the control should be rendered.
Error: '<SomeValue>' Could not be set to '<SomeProperty>'
This shows up on all my custom set properties. These properties are created as basic as possible. I can give the properties values in Source view and run the app just fine. I can even add a Onclick event. If I don't set any custom properties the control will render fine in Design view. It's only when I set a value to a custom property.
Property Code Example:
[Code]....
I've even removed the Category and Description tags with no difference.
I don't know if what I said makes sens, but I hope it does.
View 3 Replies
Jun 14, 2010
I seriously want to learn how to create a custom server control, for that I made a requirement for myself, but lost on how to accomplish it.
Requirement -I want to create a cascading dropdownlist control - which should have following properties -1) ConnectionString - used to get data for the 1st dropdown from database, and also it is used by 2nd DropDown to get data.2) 1stSelectCommand - Used by the 1st DropDown to get data from the database.3) 2ndWhereCommand - used by the 2nd DropDown - uses the selected value from the 1st DropDown in the where clause to get data.
Methods - 1) DropDown1_SelectedIndexChanged()2) DropDown2_SelectedIndexChanged(3) CustomCascading_Changed() - this happens when any of the DropDowns index changed.
PS - This is a random requirement, of course it got nothing to do with any project or real time.I want to learn, so i incorporated basic concepts like Data Access, Custom Methods, Properties etc.PPS - I know how to create basic custom server control, so plz dont forward me links to how to create basic custom server controls. But in case with extrordinary links.
View 6 Replies
May 13, 2010
I was referred here by MSDN forums hope this is the right place - I have a custom control (:WebControl) that renders web.sitemap in a specific way. While it runs error free and produces the expected result, at Design-Time it complains
[Code]....
and have tried the SiteMapDataProvider Tag with and without the SiteMapProvider
attribute.Does anybody have (a) any experience with this, or (b) any suggestions as to how to track down the problem?
View 3 Replies
Aug 9, 2010
I have a site using eight (so far) custom web user controls and two of them have started misbehaving in design view. When designing the control itself some (in one control) or all (in the other) regular controls (labels, text boxes, etc.) disappear from the design view surface. They can still be seen in the source view and if the control is hosted on a regular .aspx page the control displays properly. The code window recognizes all controls in the objects dropdown list and I can write appropriate code. The controls run properly on their hosted pages.
If I switch to Split view and select controls in the source view panel a very small area od the design surface becomes selected (like one pixel for any of us who remember programming old DOS applications with 80-column screens) but no controls can be seen.
In short, the controls work in every respect except that I cannot see all or part of the design surface in Design view when editing the controls directly.
I've double-tripple checked the source code for anything that may be causing this and just don't see anything. (The controls aren't that complicated.)
View 2 Replies
Aug 12, 2010
I want to use an image inside a Custom Web server control! Do I need to use Web.resources ? if so , how to do ?
View 9 Replies
Mar 2, 2010
I have developed a User Control in inline code model and convert this into dll and try to add it into Visual Studio ToolBox. It shows error "There is no component found in the object.". It is showing actually because i have not added ToolBoxData attribute just before the class declaration, because there is no class declaration in the inline code model. I don't know where i have to add ToolBoxData attribute.
View 1 Replies
Jun 8, 2010
I am using two user controls in my page. The controls are loaded dynamically one at a time. I'm just referencing the user controls in the page and loading them dynamically using 'LoadControl()'. Everything is working fine till now and the user can switch the controls one another.
Here the issue I found is eventhough the controls are working as expected and the data is visible, the rendered HTML contains only the first loaded user control's markup.
Even if the current control displayed is 'usercontrol2', the source shows 'usercontrol1' markup. How can I force the page to render 'usercontrol2' markup and remove 'usercontrol1' markup while loading'usercontrol2'?
View 6 Replies
Jan 3, 2011
Hope this is the correct forum for this question. I am using VWD 2010 an have a web project and get the following error upon execution:
Parser Error Message: Unknown server tag 'custom:AjaxValidator'.
My code is as follows in the .cs file:
[Code]....
[Code]....
View 1 Replies
Aug 10, 2010
suppose i've created my own user control, and it has a textbox and a property for the textbox so that if i use the user control from within the aspx file, i can give the property a value. for example:
[Code]....
is it possible to also set the property to be seen via the desing mode , just as it works for other (built in) controls? maybe a different method to implement the same scenario?
if you still didn't understand what i mean : after setting the value of DefaultNum1 via the code i've written here, i expect the textbox associated with this property to be updated as well to '1' via the design mode (and split mode). of course it won't work using the current method, since VS cannot guess what is going on with the property and understand that all of its purpose is to assign an initialization value for the textbox.
View 8 Replies
Oct 20, 2010
After I imported a VS 2008 web project to VS 2010, I can't view aspx pages that have master pages in design mode. The page design mode displays "error creating control - contentplacehoder1 object reference not set to an instance of an object." The project builds and runs fine though. I have only one master page that all other aspx pages reference and I don't have any nested master pages.
View 2 Replies
Apr 19, 2010
I have use composite custome control its contain button and textbox and gridveiw
but design time gridview is not display .
View 1 Replies
Mar 22, 2011
I am trying to build a custom composite control, which allows me to add custom content to each child control. It's a similar concept to what you have with a GridView and TemplateColumn. The markup used to place the control on the page would end up being something like this:
[Code]....
I have the code below, which allows me to put that markup on the page without throwing any errors, and it renders all the correct HTML, except it doesn't render the contents of the ColumnTemplate. I have replaced the Render() code with a comment because it's quite long winded and doesn't add anything important here:
[Code]....
I have tried to follow examples on MSDN and other forums but I can't make this work. I think I'm missing the code to render the contents of the template, but I don't know how to hook that up.
View 1 Replies
Mar 31, 2010
I currently have a file "abc.htm" in my Custom Server Control Project and it's Build Action is set to Embedded Resource.Now in the RenderContents(HtmlTextWriter output) method, I need to read that file and render it on the website.I am trying the following but it's to no avail:
protected override void RenderContents(HtmlTextWriter output)
{
var providersURL = Page.ClientScript.GetWebResourceUrl(typeof (OpenIDSel), "OpenIDSelector.Providers.htm");
var fi = new FileInfo(providersURL); // <- exception here
//the remaining code is to possibly render the file
}
This is an example of how the providersURL is:
/WebResource.axd?d=kyU2OiYu6lwshLH4pRUCUmG-pzI4xDC1ii9u032IPWwUzMsFzFHzL3veInwslz8Y0&t=634056587753507131
FileInfo is throwing System.ArgumentException: Illegal characters in path.
View 1 Replies
Oct 18, 2010
I created an Extender which has a custom property that drills down a list XML elements from an xml file, where users can select xml elements during design-time. This works perfectly fine. However, my code only has a hardcoded xml filename (source of the xml elements list) and I need to change this by maxing the xml file user-specified.
What I did is that I created another control (panel) which has a custom property that when clicked (through the ellipsis), it will allow a developer to select the xml file which is supposed to be the source xml file that the Extenders shall use. The filedialog from custom panel's property works perfectly fine.
However, my problem now is that when I drag-drop my Extender, I cannot find a way to get the property value of the custom Panel Control which contains the xml filename. I tried creating a static variable which I thought the custom controls can share but VS2010 is breaking.
View 4 Replies
Jan 4, 2011
I'm receiving the following error in DesignMode with the Accordion1 control. Not sure what is causing this. This is my ASP WebApp.Error Rendering Control - Accordion1 An unhandled exception has occurred. Collection was modified; enumeration operation may not execute.Any idea, what causes this error?Code VS 2005 Pro ASP Ajax XP SP3
View 3 Replies
Mar 28, 2010
I have looked at all the posts I can find on this problem and tried everything I can think of, but still the problem persists. I am getting really sick of it.was working fine for the last year until an update to MS Office 2007 caused a lot of problems (automatic update). After checking posts here, I removed it completely. No change. I then tried all the things I could find on other posts, also no change. Today, I removed VS and the Web Authoring Component and re-installed. Still no go.
Does anyone have a fix for this problem. It seems that it has been around a long time, but is still giving problems. I even saw one suggestion to reformat the drive! You've got to be joking!
View 4 Replies
Mar 4, 2010
I have a custom control which inherit from the Table class and in the constructor, it takes a an integer as an argument. There is no empty constructor.
Is there a way for the user to set that variable in the properties window after they drag the control onto a form.
I know some .NET controls, you can set the source for the parameter to different things like another control's property, QueryString using just the properties window.
Right now, I have to create the control dynamically. I read the query string and then created the object.
View 1 Replies
Dec 24, 2010
here's a situation and I would appreciate your response.
I have programmatically created the Wizard control:
Page_Load(obj s, evargs e)
{
Wizard ClaimDetailWizard = new Wizard();
foreach(int item in selectedItems)
{
//create new step
//added custom control to new step
//add step to wizard
}
//added wizard to a placeholder on a page
}
Based on List I get from Session i added new steps to my wizard To each step I had added a custom control
Each custom control in tern contains another custom Gridview Control in it.
So here's the problem when the page loads for example for two steps. All is good Wizard does what it's supposed to do.
But when I try to use sorting or paging in that custom Gridview. Somehow it displays the gridview I should see in the next step of the wizard.
Also what I'm noticing through debugging. Is that when I press next in the wizard I go back to the original page where I do all of the code specified above, and it recreates the wizzard. But it goes to the next step. Is this the way wizard supposed to work? Just doesn't seem very efficient.
View 1 Replies
Aug 20, 2010
i am new to technology so go easy on this post according to what i read from web there are 3 type of custom server controls 1 superclass2 composite 3 renderedi found video tutorial for superclass custom server control but couldnt find video tutials for other 2.lease forward me link for composite and rendered custom server controls video tutorial
View 1 Replies
Dec 20, 2010
created a Custom Textbox Control that is intended to be a "masked date" textbox, so that I can handle different ways a user might enter in a date and make it work no matter what.I did this by creating a custom control with 3 separate Textboxes one for month,one for day one for year,then do some handling for different things that could be entered and it would all work.
The problem I am having is,when I add this control to the page,if I do an alert to check the Text value of the custom control it just gives me "[ServerControl1]" even if I enter in a date.
I tried doing an AutoPostback after entering so that it would refesh the Viewstate to have the values of the textboxes but the control doesnt seem to actually postback, even though I have it enabled.accessing the Textbox value after someoen
has entered a date?first custom control I have created and have been using google.
My Server Control Code is as follows:
[Code]...
View 1 Replies
Sep 29, 2010
i registered an image in AssemblyInfo.cs like this:
[Code]....
now i want to initialize that image in css file for background-image but it dose'nt work.
my css file is:
[Code]....
i also try with this :
[Code]....
View 3 Replies
