DataSource Controls :: Failed To Update Database "C:MEMBERSHIP.MDF" Because The Database Is Read-only
Feb 8, 2010
This is a very common error as evidenced but the very large number of problems and suggested solutions on the web. I finally got around it last week but can't remember what was the step that did it. At that time, I was building a web application rather than a web site. Is that the difference? As you can see, it is no longer in the APP_DATA folder and is named membership.mdf rather than aspnetdb.mdf. I ran aspnet_regsql.exe to create it and actually had it working and was updating it successfully. But for other reasons, I had to scrap the application and decided to re-create it from scratch as a web site rather than a web application. I had been using Visual Studio 2008 to build the web application but am now using Visual Web Developer 2008 Express Edition to build the web site. Unfortunately, the Visual Studio application will no longer open so I can't verify that the web application still works. Can anybody help? (Please!!!) BTW, ASPNET and NETWORK SERVICE both have full control over the membership.mdf.
View 1 Replies
Similar Messages:
Apr 1, 2010
I have set up my website to use ASP.NET Membership. it all works fine when trying to use it on my development machine but when I put it on the web server and try to log in, I get this error :
"Failed to update database "C:INETPUBWWWROOTAPP_DATAASPNETDB.MDF" because the database is read-only. "
View 5 Replies
Oct 1, 2010
I am currently working on visual studio 2008 , sql express 2005, i have copied .mdf and .ldf files , after i copied these files and try execute some existing stored procedure but exception is coming like " Failed to update database xxxxxxxxxxxxxxxxx.MDF" because the database is read-only", I dont knw what's wrong with this , i have executed same stored procedure in old .mdf and .ldf database , and its working fine . but in copied .Mdf , not working.
View 10 Replies
Oct 23, 2013
I have hosted a website with database using windows server, when I run normal pages are running the data stored are being fethched and can be seen but for edit,save and delete button it gives error below
Failed to update database "C:HOSTINGSPACESRWTINDIARWTINDIA.COMWWWROOTAPP_DATALAKSH_DB.MDF" because the database is read-only.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Failed to update database "C:HOSTINGSPACESRWTINDIARWTINDIA.COMWWWROOTAPP_DATALAKSH_DB.MDF" because the database is read-only.Source Error:
Line 46:
Line 47: SqlCommand cmd = new SqlCommand(qry, conn);
Line 48: cmd.ExecuteNonQuery(); Line 49:
Line 50:
Source File: c:HostingSpaces
wtindia
wtindia.comwwwrootPrincipal.aspx.cs Line: 48
What i do? Ihave checked all the folders and its properties all folders have all rights then also it is giving error ....
View 1 Replies
Jan 22, 2010
Creating a system with web front end and SQL backend (microsoft obviously). I have tried using the asp.netsqlprovider but i can;t as i am only allowed one database on the server, so i then tried to update my current database with the triggers to input the schema into the already existing database.Next step i create my own table with two simple fields of username and password and try and authenticate that way, i can't get that to work either.
I ahve limited permissions on the network as i am a University Student. I really don't know what to do. Never had to create a log on system before and i thought it would be far simpler than this. I ahve used Microsoft's sqlprovider schema before and it worked fine. I have also authenticated via IIS and AD too before. I can't do any of those two in this instance it seems.I need an alternative for logging in users, if needs be in can be crude. I also still need to have some kind of two different views too for logged in users and not logged in users, but that can change if needs must.Don't let me down people, haha. Think this posts in the correct place, i could not find another one i thought could be more relevant.
View 4 Replies
May 7, 2015
When send mail and receiver open the mail and click the link at that time call another page and update a data base with data....
View 1 Replies
Jun 30, 2010
I was working on a asp.net project earlier but due to some OS problem I had to re-install the OS..so before re-installing the OS I detached my sql database and then attached it back after installation..but I am having a login problem now..the previous servername was XYZ-DB840C74SQLEXPRESS..so this user i.e. XYZ-DB840C74ASPNET is added to the database's permissions..now my new server name is XYZ-8D50FD73SQLEXPRESS..but I am unable to add this user through the permissions wizard..I am getting the following error: Cannot open database "finance" requested by the login. The login failed. Login failed for user 'XYZ-8D50FD73ASPNET'.
View 7 Replies
Jun 8, 2010
I am writing a page for creating a new user for a website. After the user fills out the form and click the "Create User" button, the information provided is supposed to be sent for storage to the database. I have been getting the same error message for a couple of days now and I've ran out of things to try. The message doesn't seem like a complicated issue, in fact it's quite common and found a great deal of information on how to resolve it. However, nothing I've tried works. I'm using VS 2010, and SQL Server Express 2005. The message I get is the following:Cannot open database "[database]" requested by the login. The login failed.Login failed for user "[MACHINE_NAMEUSER]".I have added my current Windows account to the Users folder under the Security folder through Management Studio and granted it all the role memberships. I'm also using Windows authentication. If there's any information I'm not providing to figure out what's the issue, let me know and I'll post it.Stack Trace:
[Code]....
View 3 Replies
Feb 24, 2010
i am trying to read data of from a sql database
the code that im using is as follows:
[Code]....
as you can see, im using table adapters - though when i run the page, it throughs me the following error, which i'm finding hard to understand
for my last project, i had to use the exact code, but at the time, i was using an access DB and now i'm uning sql D|B
the only difference from last time is that instead of using :
using System.Data.OleDb;
Now im using: using System.Data.SqlClient; //sql server
View 4 Replies
Mar 5, 2010
I m uploading a text file. I want to read that text file line by line and I want to save that data into database if there are no errors in that text file. I have 5 different columns in database and I want to take those 5 columns data in the text file and insert into respective columns.
For this, which is the best way to do. Can we read and insert data into respective fields in no time.
View 2 Replies
Feb 21, 2010
here is my code which is working fine to read batabase image from database but if there is NULL value in database so how can i read physical path noimage.jpg
[Code]....
View 2 Replies
Dec 6, 2013
I am using sql membership table to create users and role allocation etc. it is working absolutely fine.now i have added webparts in page which also working good but when i click to minimize the webparts it gives me below error. My question is I have sql membership table in my database then webparts is using mdf files from app data.
Failed to update database "E:WWWROOTAPP_DATAASPNETDB.MDF" because the database is read-only.
View 1 Replies
Mar 19, 2010
my problem is my asp.net and C#.net application should read flat files(.txt,.doc) from folder automatically and read the data from file and stored into database
my file like this :
BNK20100312APPHU6658994 // BNK,20100312(date),Ap,PHU6658994 So we have to store these..
BNK20100312APPRU5104220
BNK20100312APPRU5761800
BNK20100312APPZU3739288
BNK20100312APPZU4454037
BNK20100312APESU2552894
BNK20100312APAXU4302543
BNK20100312APCKU1613369
View 1 Replies
Mar 19, 2011
i have a table fileupload with id,username,filename,filedata,uploaddate here i have uploaded successfully...but i cannot retrieve the binary file uploaded by using its id. can anybody tell me how to read binary file from database using c#.net3.5?
View 3 Replies
May 3, 2010
i'm quite new to asp.net and have been working on a simple way for users to send messages to each other....
the messages work fine, users can send and reply, however, i want a way to tell the users when they have a message and how many...
how to do this in simple terms and supply vb code if possible.
View 2 Replies
Apr 19, 2010
i want to update the data of a database through a gridview update button
how can i attach a dataconvertion like this
[Code]....
View 1 Replies
Jan 19, 2010
I have just used the Import and Export Wizard to copy my production SQL Server database, which uses Membership and Roles. I used the option to copy all the data from existing tables and views and did not modify the mapping in any way. Things do not seem to have gone well.....
My source database has a bunch of views with names like vw_aspnet_Applications,vw_aspnet_MembershipUsers, etc. The copy database has these listed as tables!I wondered if running aspnet_regsql.exe might fix things. I needed to run this anyway to create all the missing stored procedures for Membership, etc. However, it failed with the error:Setup failed.Exception:An error occurred during the execution of the SQL file 'InstallCommon.sql'. The SQL error number is 2714 and the SqlException message is: There is already an object named 'vw_aspnet_Applications' in the database.Creating the vw_aspnet_Applications view...I am a bit lost. All I want to do is to create a total clone of my production database for test purposes. Where do I go from here?
View 11 Replies
Jul 18, 2010
I am getting this error when trying to connect a database from another computer in my home network:
System.Data.SqlClient.SqlException : Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
this database is using windows authentication. sqlserver 2008.
What is the connectionstring that I need to use in order to get the database?
View 1 Replies
Feb 22, 2011
I installed sql server express 2008 R2, no problems.
I created a database and added a table, no problems.
I'm using the entity framework, I created and am using the .edmx file, no problems.
I created a form that reads from and submits to the table, no problems.
I added the membership tables to the database, now I have problems.
I can still read from and update my table fine, so clearly the connection string in my web.config still works. But I can't add a new user or do anything with the website administration tool. It can't find any providers, and under security, it tells me it can't login into the database. When I try to register a new user, I get a failed login error, again for my database user. Yet I can login fine through Server Management Studio with the same credentials.
View 2 Replies
Jul 6, 2010
[code]....
Im trying to update my DB(DataBase) by using SQL UPDATE query ,but its not updating in the dataBase i receive confirmation(in testLabel) that one row is affected(dataReader = query.ExecuteReader(); return numbers of rows affected)...
I have given a HTML editortext control on a page,which generates HTML (i have to store it in my DB,that page is only for Admin) ,on pressing Update button , im receving in my testLabel that one row is affected(which shows DB is updated succesfully) but when i check my DB its in old state,it is not updating...
Here is my Event handler of Update Button which have to make updates in DB:
[Code]....
[Code]....
View 2 Replies
Jan 9, 2010
i am trying to update the database for a simple bank project. I am updating the current balance of an account. What i did was read the current balance first then add the deposited amount and then trying to update it to the database. here is the code
protected void Button1_Click(object sender, EventArgs e)
{
SqlConnection newSqlConnection = new SqlConnection();
[code]...
View 5 Replies
Feb 10, 2010
I am beginner to sql database and asp.net.I want to fetch datetime from sql database and display it in textbox.I have wrote one stored procedure.The Procedure is
declare @o_Output varchar(30)
SET @o_Output =
getdate()
select @o_Output
Using the above procedure i'm getting current date and time.but my problem is i am hitting ql database while page loading itself. if i am hitting db on 12.40pm means, the textbox showing always the sametime only. I am trying to insert or update some data's into db that time only, i am hitting the db.The textbox datetime(12.50pm) has been changed that time alone. i want to update datetime to textbox at every minutes or seconds.
View 11 Replies
Jun 16, 2010
i have function writeToDatabase(); that function use to store registration information to database. and then after store todatabase success..another page will appear and need user to confirm all data that has been filled...then with the confirmation..all data will send to HOST. what about if send data to database success..and send data to host FAIL(any reason due to send to host fail) ... i just think about to cancel anything that function writeToDatabase() did..
View 1 Replies
Apr 1, 2010
I'm fairly new to asp.net and I'm trying get my arms around the data entry and update. I have created a nice data entry formusing a stored procedure. It works well but for a test database, it's pretty much overkill, but worthwell in learning how. I'm going through the ADO.NET quick start tutorial and I've ran across a couple of questions that I've not be able to answer. In my website,I'm wanting to edit the database by creating a separate form that is filled with the existing database information for that particular id. My main question is how to I take the information from the dataset and get it into my form. The code below is not fillingmy form. Not sure what I should be using here:
[Code]....
View 3 Replies
Apr 23, 2010
I have a table with Id, Name,...IsActive, etc. If user wants to delete a record from the user, he/she should update the field IsActive to false. I am able to acheive this functionality using the below steps,
1. Query the database for the row which is to be updated.
2. Update the property IsActive to false.
3. Submit the changes to the database.
This way i am successful. But i have a query here is that, when we execute steps 1 and 3, there will be two trips to the database for getting the required object and again updating the same object to the database.
Is this not a performance hit having multiple calls to DB for a simple operation.?
Do we have any other go, where in within a single call to database, can i update a field of row?
View 3 Replies
