I found this solution to force full postbacks from within an UpdatePanel
<Triggers>
<asp:PostBackTrigger ControlID="controlID" />
</Triggers>
but my control is actually inside an ItemTemplate nested in a GridView. Therefore when my page loads, it doesn't find that control.
How can I force a full postback from my control (an asp:LinkButton) from within my GridView?
I have got the following gridview with a UpdatePanel and approve and save button in each row. How do I create a full postback if approve button is click and asyncPostback if save button is click.
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<Triggers>
<asp:PostBackTrigger ControlID="btnApprove" />
</Triggers>
<ContentTemplate>
<asp:GridView ID="gvApproval" runat="server" CssClass="gridview" BorderColor="#E5E5E5"
Width="98%" AutoGenerateColumns="False" DataKeyNames="NewProcessId" OnRowCommand="gvApproval_RowCommand"
OnRowDataBound="gvApproval_RowDataBound" OnRowEditing="gvApproval_RowEditing">
<Columns>
<asp:TemplateField Visible="False">
<ItemTemplate>
<asp:Label ID="lblApprovalId" runat="server" Text='<%# Bind("ApprovalId") %>' Width="1px"></asp:Label>
</ItemTemplate>
</asp:TemplateField>
<asp:TemplateField HeaderText="Comment">
<ItemStyle Width="80%" Wrap="True" />
<ItemTemplate>
<asp:Label ID="lblComment" runat="server" Text='<%# Eval("Comment").ToString().Replace("
", "<br />") %>'></asp:Label>
<asp:TextBox ID="txtApprovalComment" runat="server" CssClass="textMessageBox" TextMode="MultiLine"
Width="98%" Visible="false"></asp:TextBox>
<asp:RequiredFieldValidator ID="rfvApprovalComment" runat="server" ControlToValidate="txtApprovalComment"
Display="Dynamic" CssClass="textErrorMessageNormal" ErrorMessage="Comment is required before approval"
ValidationGroup="Approve"></asp:RequiredFieldValidator><br />
<asp:ImageButton ID="btnApprove" runat="server" CssClass="spbutton" Visible="false"
ImageUrl="~/Images/ButtonApprove.gif" ValidationGroup="Approve" CommandName="Approve">
</asp:ImageButton>
<asp:ImageButton ID="btnSave" runat="server" CssClass="spbutton" Visible="false"
ImageUrl="~/Images/ButtonSave.gif" ValidationGroup="Save" CommandName="Save">
</asp:ImageButton>
</ItemTemplate>
</asp:TemplateField>
</Columns>
<PagerStyle CssClass="pager" />
<HeaderStyle CssClass="gridtableHeading" Wrap="False" />
<AlternatingRowStyle CssClass="alternateRow" />
</asp:GridView>
</ContentTemplate>
</asp:UpdatePanel>
So this might be a fairly specific issue but I figured I'd post it since I spent hours struggling with it before I was able to determine the cause.
<asp:GridView ID="gvAttachments" DataKeyNames="UploadedID" AutoGenerateColumns="false" OnSelectedIndexChanged="gvAttachments_SelectedIndexChanged" runat="server">
<EmptyDataTemplate>There are no attachments associated to this email template.</EmptyDataTemplate>
<Columns>
<asp:TemplateField ItemStyle-Width="100%">
<ItemTemplate>
<asp:LinkButton CommandName="Select" runat="server"><img src="/images/icons/trashcan.png" style="border: none;" /></asp:LinkButton>
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
In the ItemTemplate of the TemplateField of the GridView I have a LinkButton with an image inside of it. Normally I do this when I have an image with some text next to it but this time, for whatever reason, I just have the image. This causes the UpdatePanel to always do a full postback.
I have an gridview inside of a multiview inside of an updatepanel. I create all this dynamically with code (AutoGenerateSelectButton=true).If the SelectedIndexChanged event is fired, there is a full postback. How can I avoid this?
View 6 Repliesi had a gridview, inside that i had a download imagebutton, on clicking this button i need to download the file.
and this gridview is inside update panel. i think trigger to be used but i used both postbacktrigger and asynchronus postback trigger. but it is not triggering the button instead it is giving error.
c# - How do I force full post-back from a button within an UpdatePanel?
View 3 RepliesI'd like to programmatically force a full page postback to occur after an event is fired by one of the child controls. I can't add any triggers to make this work so it will have to be done via code.
View 2 RepliesI have something like this:
[Code]....
[Code]....
This does NOT work. What's wrong here?How do I accomplish my goal? I MUST use the Button1_Click event for this one.
i have upgrade my website from framework 2.0 to 3.5 but i have problem with ajax .I get full postback when i click a linkbutton inside update panel .
View 14 RepliesI'm having few UpdatePanels on my master page. And then, I have RadTreeViewcontrol on the page, that should cause partial postback each time node is clicked. Everything works fine there. Since I'm using the same tree on some other pages, I moved this functionality to UserControl. Stuff I've done before, so no problem. Moved some code to ascx, created some events. Everything always worked for me well. But not now. RadTreeView is nested inside UserControl, and this control on master page with update panels, see below:
<asp:Panel ID="pnlContentWrapper" runat="server" CssClass="ContentWrapper">
<div id="HeaderBreadCrumb">
<asp:ContentPlaceHolder ID="HeaderBreadCrumbContent" runat="server" />
</div>
<div id="HeaderMenu">
<asp:UpdatePanel ID="upnlTreeMenu" runat="server">
<ContentTemplate>
<asp:ContentPlaceHolder ID="HeaderMenuContent" runat="server" />
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="treeProductTree" />
</Triggers>
</asp:UpdatePanel>
</div>
<div id="TreeDiv">
<fp:ProductTree ID="treeProductTree" runat="server" />
</div>
<asp:Panel ID="ContentDiv" ClientIDMode="Static" runat="server">
<asp:UpdatePanel ID="upnlTreeContent" runat="server">
<ContentTemplate>
<asp:ContentPlaceHolder ID="TreePageContent" runat="server" />
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="treeProductTree" />
</Triggers>
</asp:UpdatePanel>
</asp:Panel>
</asp:Panel>
And the user control is really simple:
<%@ Control Language="vb" AutoEventWireup="false" CodeBehind="ProductTree.ascx.vb"
Inherits="ProductTree" %>
<div>
<telerik:RadTreeView ID="treeProductTree" ClientIDMode="Static" runat="server" EnableDragAndDrop="false"
SkinID="CustomSkin" CssClass="MasterProductTree" DataFieldID="NodeId" DataFieldParentID="NodeParentId"
DataTextField="NodeName" DataValueField="NodeId" />
</div>
And some code behind:
Imports Telerik.Web.UI
Public Class ProductTree
Inherits System.Web.UI.UserControl
Public Event NodeExpand As EventHandler(Of ProductTreeNodeExpandEventArgs)
Public Event SelectedNodeChange As EventHandler
Protected Sub ProductTree_NodeExpand(ByVal sender As Object, ByVal e As RadTreeNodeEventArgs) _
Handles treeProductTree.NodeExpand
Dim nodeId As Integer = CInt(e.Node.Value)
Dim evetArgs = New ProductTreeNodeExpandEventArgs(nodeId)
RaiseEvent NodeExpand(Me, evetArgs)
//'some logic
End Sub
Protected Sub ProductTree_OnNodeClick(ByVal sender As Object, ByVal e As RadTreeNodeEventArgs) _
Handles treeProductTree.NodeClick
RaiseEvent SelectedNodeChange(Me, New System.EventArgs())
End Sub
End Class
What I don't know is: why is this causing full postback instead of partial? I suspect that it may have something to do with raising my for SelectedNodeChange, but I don't know how to deal with it other way. I need to let other components know, that node selection changed. How can I improve this to make it work with UpdatePanels?
I have run into what seems to be a very famous problem: My updatepanel fires a full postback instead of a async postback. The normal solution is to give all controls you add dynamically an ID, which I have done, but I still get a full postback instead of my async postback. Here's the code:
HTML:
<asp:UpdatePanel ID="ItemsUpdatePanel" runat="server" UpdateMode="Conditional" ChildrenAsTriggers="False">
<Triggers>
</Triggers>
<ContentTemplate>
<asp:ListView ID="PlayerItems" runat="server" GroupItemCount="5"
onitemdatabound="PlayerItems_ItemDataBound">
<LayoutTemplate>
... Listview stuff ...
</asp:ListView>
</ContentTemplate>
</asp:UpdatePanel>
The interesting part is the C# code behind (method PlayerItems_ItemDataBound), which is like the following:
ImageButton imgBtn = new ImageButton();
imgBtn.ID = "itemBtn";
imgBtn.Width = Unit.Pixel(30);
imgBtn.ImageUrl = "~/Images/Game/Items/" + myItem.ItemImageUrl;
ContextMenu menu = new ContextMenu();
menu.BoundControls.Add(imgBtn);
menu.ItemCommand += new CommandEventHandler(menu_ItemCommand);
menu.AutoHide = true;
menu.RolloverColor = Color.Gray;
menu.ID = "MenuMenu";
Panel panel = (Panel)(e.Item.FindControl("ItemPanel"));
panel.Controls.Add(imgBtn);
panel.Controls.Add(menu);
AsyncPostBackTrigger trig = new AsyncPostBackTrigger();
trig.ControlID = menu.UniqueID;
trig.EventName = "ItemCommand";
ItemsUpdatePanel.Triggers.Add(trig);
So, I actually add an AsyncPostBackTrigger to the menu, so the ItemCommand event should be registered. What happends when I click an item in this contextmenu, is a full postback happends. I have been trying to play with the ChildrenAsTriggers property without help.
I have a grid. Inside the grid I have a button which is placed inside an update panel, which when clicked should do something I tell it to do in code behind. The problem is that when I click the button, it ignores the fact that the button is inside the update panel and it refreshes the entire grid, instead of refreshing only the stuff inside the update panel. What I need it to do instead is update only things inside the update panel my button is in, but leave alone the grid.
This is the setup I currently have:
<asp:GridView ID="grv_FieldDesc" EnableViewState="True" runat="server" DataSourceID="ObjectDataSource1"
OnPreRender="grv_FieldDesc_PreRender">
<asp:TemplateField HeaderText="Hidden">
<EditItemTemplate>
<asp:UpdatePanel ID="updp_grids_formula" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<asp:LinkButton ID="Button1" runat="server" OnClick ="Button1_Click">LinkButton</asp:LinkButton >
</ContentTemplate>
</asp:UpdatePanel>
</EditItemTemplate>
</asp:TemplateField>
</asp:GridView>
I have basically the following structure set up :
[Code]....
I am aware that a FileUpload requires a full page postback. I read the article http://www.4guysfromrolla.com/articles/090209-1.aspx[^]I tried to install a PostBackTrigger programmatically to get a full postback only on the ImageButton1 control. All other postbacks must be partial. (GridView sorting, paging, ...)In code behind I do :
[Code]....
The above code does not seem to install a full postback only for the ImageButton1, so the file upload fails. How can I make this work ?
I have a quite strange situation where I have the following code:
<asp:Timer ID="GameClock" runat="server" Interval="5000" Enabled="true"
ontick="GameClock_Tick">
</asp:Timer>
<asp:UpdatePanel ID="ItemsUpdatePanel" runat="server" UpdateMode="Conditional" ChildrenAsTriggers="false">
<Triggers>
NOTE THE TRIGGER IS COMMENTED OUT
<%--<asp:AsyncPostBackTrigger ControlID="GameClock" EventName="Tick" />--%>
</Triggers>
<ContentTemplate>
<asp:ListView ID="PlayerItems" runat="server" GroupItemCount="7"
onitemdatabound="PlayerItems_ItemDataBound">
<LayoutTemplate>
<table border="1" cellpadding="2" cellspacing="0" runat="server" id="tblProducts">
<tr runat="server" id="groupPlaceholder">
</tr>
</table>
</LayoutTemplate>
<ItemTemplate>
<td id="Td1" runat="server" style="vertical-align:top; text-align:left; height:100%;">
<div>
<div id="category" runat="server">
<asp:Panel ID="ItemPanel" runat="server">
</asp:Panel>
</div>
</div>
</td>
</ItemTemplate>
<GroupTemplate>
<tr runat="server" id="productRow">
<td runat="server" id="itemPlaceholder"></td>
</tr>
</GroupTemplate>
</asp:ListView>
</ContentTemplate>
</asp:UpdatePanel>
This gives a quite strange result: Every 5s my whole page gives a full postback. When I comment in (activate) the asyncpostbacktrigger, the updatepanel does not give a full postback. In the PlayerItems_ItemDataBound I have the following code (which, I do think, do not matter):
protected void PlayerItems_ItemDataBound(object sender, ListViewItemEventArgs e)
{
if (e.Item.ItemType == ListViewItemType.DataItem)
{
ListViewDataItem dataItem = e.Item as ListViewDataItem;
if (dataItem != null)
{
BaseItem myItem = dataItem.DataItem as BaseItem;
Panel itemPanel = new Panel();
Literal firstLiteral = new Literal();
firstLiteral.Text += "<div id='smoothmenu1' class='ddsmoothmenu'>";
firstLiteral.Text += "<ul>";
firstLiteral.Text += "<li><img src='Images/Game/Items/" + myItem.ItemImageUrl + "' />";
firstLiteral.Text += "<ul>";
// Add all events bound to item into contextmenu
itemPanel.Controls.Add(firstLiteral);
foreach (Delegate del in myItem.Actions.Items)
{
Literal firstItLit = new Literal();
firstItLit.Text += "<li>";
itemPanel.Controls.Add(firstItLit);
MethodInfo methodInfo = del.Method;
string commandName = myItem.ItemId + "|" + methodInfo.Name;
LinkButton btn = new LinkButton();
btn.Text = methodInfo.Name;
btn.Click += new EventHandler(btn_Click);
btn.CommandName = commandName;
itemPanel.Controls.Add(btn);
Literal secondItLit = new Literal();
secondItLit.Text += "</li>";
itemPanel.Controls.Add(secondItLit);
}
Literal btnLiteral = new Literal();
btnLiteral.Text += "</ul>";
btnLiteral.Text += "</li>";
btnLiteral.Text += "</ul>";
btnLiteral.Text += "</div>";
itemPanel.Controls.Add(btnLiteral);
Panel panel = (Panel)(e.Item.FindControl("ItemPanel"));
panel.Controls.Add(itemPanel);
}
}
}
When I create a NEW updatepanel, ItemsUpdatePanel1, it does not fire a full postback without the timer. I can even start copying items from ItemsUpdatePanel to ItemsUpdatePanel1, and suddenly the full postbacks happen. I tried 2 seperate times, and they started happening at different times.
I have a webform which has an updatepanel with a combobox, add button, delete button and a table. The functiion of the two buttons is to add or delete table rows. However, the table is getting cleared everytime the combobox item is selected. Is there anotherway of retaining the table contents?The code for the updatepanel is:
<asp:UpdatePanel ID="UpdatePanelTreatment" runat="server" UpdateMode="Conditional">
<triggers>
<asp:PostbackTrigger ControlID="cboTreatment" />
asp:PostbackTrigger ControlID="btnAdd" />
We have a fairly complex content management system where we start with a blank page with just an updatepanel, then in the init function add all the controls, this all works fine.The problem I'm having is that when the loginform control logs in, we get data back from the server that looks like:
|#||4|64|pageRedirect||%2findex.aspx%3feventid%3d1079%26AspxAutoDetectCookieSupport%3d1|1|#||4|15647|updatePanel|ctl00_ContentPlaceHolder1_contentup|
<span id="ctl00_ContentPlaceHolder1_DEBUG"></span><div id="ctl00_ContentPlaceHolder1_content">
<div class="contentWrapper">
<div class="form">
<div id="errors">
<div id="ctl00_ContentPlaceHolder1_ctl03" style="display:none;">
</div></div>
[code]...
I have a quite strange situation where I have the following code:
[Code]....
This gives a quite strange result: Every 5s my whole page gives a full postback. When I comment in (activate) the asyncpostbacktrigger, the updatepanel does not give a full postback. In the PlayerItems_ItemDataBound I have the following code (which, I do think, do not matter):
[Code]....
When I create a NEW updatepanel, ItemsUpdatePanel1, it does not fire a full postback without the timer. I can even start copying items from ItemsUpdatePanel to ItemsUpdatePanel1, and suddenly the full postbacks happen. I tried 2 seperate times, and they started happening at different times. I simply want the UpdatePanel NOT to give a full postback, even without a timer.
here is my simlified code default.aspx;
<script runat="server">
Protected Sub GridView1_RowCommand(ByVal sender As Object, ByVal e As GridViewCommandEventArgs)
Dim strFirstName As String = DirectCast(GridView1.FooterRow.FindControl("txtCompanyName"), TextBox).Text()
If e.CommandName = "Add" Then
companiesGridViewSDS.InsertParameters("CompanyName").DefaultValue = strFirstName
companiesGridViewSDS.Insert()
[code]...
I am searching already the web for some hours to get this working. I created a custom control (ConfigTree), which has a treeview as part of it. I put the custom control into an update panel. So far so good. When I click on different buttons (in ucc:ConfigTree) or the treeview in the custom control an async postback is done. When clicking on a node in the treeview an event for the parent element (ConfigTree) is generated, which populates again an event (NodeSelected) for the parent element (shown below). Different parent elements can handle the event differently. In one element (this one) I need to transform the async postback in a real postback with full page refresh. For better understanding see the following code:
[Code]....
the parent element (here shown) should process the OnNodeSelected and transform it into an full postback and not just an async postback, but only this event, all the other events in the ucc:ConfigTree should processed async. How can I do that? Is there a method to call in the code behind?
I think my title says it all. I have a modal dialog showing up and the user can make some changes and then click a 'Save' button. I need that to totally post back the whole page. I just assumed the button would fire off regardless of the jQuery.
View 2 RepliesIf I set up a repeater that has LinkButton controls, an UpdatePanel works great. If I add child elements to the LinkButton,such as SPAN, the UpdatePanel stops working as expected. If you click on the area of the LinkButton everything still works, but if you click on the area of the SPAN inside of the LinkButton, you get a full PostBack.I've tried setting ChildrenAsTriggers to true and a few hundred other things. Nothing seems to work. I think the UpdatePanel sees that the "click" event happened on the SPAN and doesn't know to capture it for an async postback.
[code]...
I have marquee control inside a Master page.I used timer control to refresh marquee for every 5 mins.And it is placed in update panel for implementing partial postback.
Now the problem is that,when ever timer_tick event raised it's postbacking the content pages as well.I need a solution to partial refresh of only master page.
I have UserControl and within that control i have asp:ListView. Inside the ListView i have a asp:LinkButton. When i click on the LinkButton the control raises full postback, no matter if the UserControl is inside UpdatePanel or is not.
UserControl:
<asp:ListView ID="lvImages" runat="server" OnItemCommand="lvImages_ItemCommand">
<ItemTemplate>
<div>
<asp:Image runat="server" ID="imgImageThumb" ImageUrl='<%#Eval("Image") %>' GenerateEmptyAlternateText="true" />
<asp:LinkButton runat="server" ID="lbtnImageAdd" CommandName="Add" CommandArgument='<%#Container.DisplayIndex %>'
CausesValidation="false" Text="Add" />
</div>
<ItemTemplate>
</asp:ListView>
Page:
<asp:UpdatePanel ID="up" runat="server">
<ContentTemplate>
<cuc:UserControl ID="cucUserControl" runat=server/>
</ContentTemplate>
</asp:UpdatePanel>
I have gridview in my page that users can edit their data in gridview... and in this gridview I define label that I want when users click on Edit button it change label3.text:
below is code:
<asp:GridView ID="GridView1" runat="server" CssClass="DGridView1"
AutoGenerateColumns = "false" Font-Names = "Tahoma"
Font-Size = "9pt"
HeaderStyle-BackColor = "#e0e0e0"
OnPageIndexChanging = "OnPaging" onrowediting="EditCustomer"
onrowupdating="UpdateCustomer" onrowcancelingedit="CancelEdit"
GridLines = "Both" OnRowDataBound = "OnRowDataBound"
>
And .cs:
protected void EditCustomer(object sender, GridViewEditEventArgs e) {
Label Label3 = (Label)GridView1.Rows[e.NewEditIndex].FindControl("Label3");
Label3.Text = "neda";
GridView1.EditIndex = e.NewEditIndex;
BindData();
BindData1();
}
but here when I click on EditCustomer it doen't change label3.text
I have a user control with linkbuttons (used for paging) and a repeater inside an update panel. The paging works correctly, but is causing a full page postback every time I click through to the next page.
The update panel looks like this:
[code]....
So far, I have tried adding an async postback trigger for the user control, which does cause an async postback but does not update the rest of the text in the update panel. In otherwords, the async postback occurs and the next page shows up, but the original text in the repeater is there as well just below it.
I have also confirmed that I have IDS set on my linkbuttons, since that can trigger a full postback inside an update panel.
I have tried changing the update panel mode (Always, Conditional, ChildrenAsTriggers, etc.).
None of it makes a difference - the only thing that actually causes an async postback is to use the trigger, but then the rest of the content in the update panel is not updated, so I get duplicate content.
