I'm struggling with trying to use RIA services from an ASP.NET web site.I created a new web site, added an entity framework model, then added a RIA service that uses that model. I used the DomainDataSource control to bind the ASP.NET controls to the RIA service
View 2 RepliesDetailsView has 2 properties: AutoGenerateEditButton, AutoGenerateInsertButton for hadling Update and Insert. Is there any way I can use asp:Button or some other buttons to hadle the same tasks?
View 1 RepliesI have a detailsview which has a button for insert and edit depending on mode plus a cancel button. What I am looking to do, is to use the cancel button to stop any insert or update to the database if clicked.
View 2 RepliesI have a gridview and when i click on the edit button i will get the modalpopup window which is having a popup window i want to update the data in that details view and refresh the data into gridview also.
View 2 RepliesI have made a DetailsView which in DetailsView there is action to add the data, change data and delete the data ..how to save, change, delete data, which is in the DetailsView without saving it in the database?so far I use viewstate, but I do not know how to apply it in DetailsView ..
how to create insert , update , delete . in detailsview without saving in database ..
private void Bindemptydt() {
//Declare a datatable for the gridview
DataTable dt = new DataTable();
//Add Columns to the datatable
dt.Columns.Add("report_id");
dt.Columns.Add("param_field");
dt.Columns.Add("param_label");
[code]....
'' I try to add an TemplateField to my DetailsView control with calander control, in all modes. but can only add it to cell(0).how can i insert in the middle of the row?
Dim tmpfld As New TemplateField
Dim c As Calendar = New Calendar()
DetailsView1.Rows(0).Cells(4).Controls.Add(c)
I am using 1 textbox with a Ajax Calendar extender to allow my user's to select a date graphically (exp: 12/15/2009). I have another textbox for the hour and minutes in military time(exp: 15:30). I think i have the code to grab the data from the 2 textbox's and combine them to be inserted into the field (exp: 12/15/2009 15:30). Here is my insert code for the Field:
[Code]....
However unless I make all the fields Nullable the insert fails, on top of that none of the other field that I have selected on the Detailsview Insert or Edit are inserted into there fields. Half of my fields have to be non-null values. So how do I fix this?
I can supply additional vb code and the aspx code if needed.
This is the error I'm getting: Cannot insert the value NULL into column 'Operation_type', table '/GAOSDB.MDF.dbo.BC_Perf_Log'; column does not allow nulls. INSERT fails. The statement has been terminated.'
This is the first non-null column.
I need to get this figured out because I have 30 other web pages that will be utilizing the same approach.
I have a detailsview control, which I use to enter data and save to the database. I am using object datasource to connect to the db. The detailsview control has autogenerateinsert = "true". When the insert is successfull, I want to set some variables and and to redirect the page to a different one. I don't know how to access the insert button click event of the detailsview to do it. If there is different solution like using <insertItemTemplate> and using custom linkbuttons.
View 1 RepliesI have a detailsview control which I use to enter data and save to the database. The control is connected to the db through a objectdatasource. When the insert is successful, I want to set some variables and redirect the page to a different one. The detailsview control has AutoGenerateInsertButton="True". I don't know how to access the insert button click event in the code behind,
View 1 RepliesIn my Admin page, I have a drop down list containing all current user tables in the database. The user chooses one.
My DetailsView below uses that parameter to populate itself with data from that table. The stored procedure used to select the data passes a string to sp_executesql. The string is concatenated from a select statement and the tablename parameter. Can I do something similar for Update/Delete statements? I'm not sure of the best approach, given that I won't know which/how many fields will be in the DetailsView at runtime, and which of these are keys - the choice of table depends on the user. I think Insert will be straightforward - am I right? I would like to streamline things as far as possible. Is it possible to dynamically pass in the values in, say, a string, and get my stored procedure to understand them? And what's the best method of grabbing the values from the DetailsView in this situation?
In my detailsview, I have an emptydatatemplate set up to allow users to enter new records. The code works. However, once the record is inserted, the detailsview defaults to a standard insert screen. I know this will cause confusion for the users. I would prefer the detailsview to either show in edit mode or a read-only mode. I have used detailsview.changemode and detailsview.currentmode in the custom sub created for the add new button of the emptydatatemplate- neither of which do what I was hoping. It would be even better if when there was no data, it defaulted to the insert screen (which seems like that should be an easy, no-brainer way for .net to function) but it doesn't. Or, I don't know how to accomplish it.
I don't want to force the user to click cancel after inserting an item through the emptydatatemplate just to be able to use the detailsview for other records.
Not sure where I went wrong with this one, but I can't figure it out now... I've got a DetailsView in an UpdatePanel. A dropdownlist controls which person's details are displayed in the DetailsView. I have the DataSource set to an ObjectDataSource, which has select, insert and update methods defined. I also have a method for the ItemCommand, ItemInserting, ItemUpdating and DataBound events of the DetailsView specified.
When I click "New" or "Edit" on the DetailsView I get the open form with either the details for the current person, or a blank form, exactly as I would expect. But when I click the "Update" or "Insert" buttons it does absolutely nothing. I have it running in debug, and have put breakpoints in the ItemCommand, ItemInserting and ItemUpdating methods, right at the top, and it never goes there. The form remains open, and nothing happens. If I click "Cancel", it posts back and goes back to ReadOnly mode.
A couple more minor details that may be important: This page is using a Master page, which is where the ScriptManager is. I'm actually using the ScriptManager from the AjaxControlToolkit. I also have a GridView in this same UpdatePanel, and that has a FileUpload control in it. Because the FileUpload control doesn't work properly without some tweaking, I have to call a RegsiterPostbackTrigger method on page load to link it back to the Master page's scriptmanager. Not sure if that's causing any issues...?
I had this working fine, but then as the page got more complex and I had to change some of the code, at some point it just stopped working and now I can't figure out how to get this working again... I'm happy to post code if necessary, just thought I'd try this first to see if anyone has a quick idea for what to check.
I have a problem with DetailsView linked with Database, DetailsView is Insert/Edit enabled, and adding/ediditng data works, however........ when I add a new record (DetailsView in Insert mode) and press INSET instead going to record I have just created in Read-Only Mode it shows me blank form, it looks that the "linking" field is null.
View 3 RepliesIt should be simple, but I didn't found yet how to do it. There is only one user (Admin with user name and passowrd, he has a cookie so I know when he is watching the page) I would like to show him the Update/Delete/Insert button options in my ListView, but to the other users I don't want them to be able doing this kind of things, So it should be hidden from them. How I am doing it in C# code? Showing/Hiding these buttons?
View 3 Replieshow to use button inside datalist control to insert data inside database.
View 1 RepliesIs it possible to code DetailsView to go to the new record I've just insertted? Currently it appears to default to the first record, utlimatly I'd like it sorted Last name, first name and upon an Insert it should go to that new record on pageload.
View 3 RepliesI am using DetailsView to INSERT new records. I have a field "Paid Date"(date) that needs to be pre-populated with the current date. 90% of the time, the user will use the default date, however, there are times when the user will need to change the data as needed. I want to add this default in the code-behind. I DO NOT want to use template item.
View 3 Replies1- THE METHOD :
public static int Insertclient(
int Cod_client,
string Nom,
string Tel,
string Adresse)
[Code]....
2- InsertClient.aspx.cs:
using System;
using System.Data;
using System.Configuration;
using System.Collections;
[Code]....
3- Database:
4- clientDetailsView :
5 - My request :
When cod_client already exisits , i want to mention that in result message.
I figure that this should be relatively straightforward, but I still can't get it to work. I have a gridview and a detailsview to set up shifts for students and teachers. I would like to be able to insert new shifts using a detailsview. I will limit the students, teachers and location to items that are in a dropdownlist. The problem is that when I handle the iteminserting event. the e.values collection doesn't contain all of the fields I want to populate. How do I add the new fields to the list. This is my codebehind:
Sub On_Inserting(ByVal sender As Object, ByVal e As DetailsViewInsertEventArgs)
I have a dropdownlist in the edititemtemplate of a detailsview. The dropdownlist is bound with an objectdatasource. The detailsview is bound to a seperate objectdatasource which connects it to the insert method. When the page loads the dropdownlist is bound properly. However, when I make a selection and select insert I get the following error: Could not find a property named 'DeptID' on the type specified by the DataObjectTypeName property in ObjectDataSource 'objCurrentProduct'. I've tried to remove the SelectedValue='<%# Bind("DeptID") %> attribute. I can then insert without an exception being thrown but the selected value of the dropdown is not recognized. Here is the code:
[Code]....
[Code]....
Scenario : I have two database tables with one to many relationship. eg:- City and Related news. So I have a gridview(Gridview1) which lists out all the cities and allows edit, delete of the gridview rows. Now since i wanted to display all news for the city, i have a nested gridview as a column in this Gridview1. This nested gridview displays all the news for the cities. And I have edit, delete buttons for this gridview too - So far, good - works fine.
Now what I would like to do is - To insert a new news item for a city. For this, I attached a detailsview to my nested grid(gridview2), and tried to insert. I need the primary key id of city table from the first grid (gridview1) to insert the news into the second database table and I could not access this value from the parent gridview. My gridview1 does not have datakeyname, it is programatically bound.
Also, When the gridview/detailsview is nested, it does not get listed in the event-handler list. So I cannot use say, detailsview1_iteminserting. I do not how to add this event handler
Has anybody done anything similar? When I started, it looked like a pretty straightforward thing - There must be some way to do this. But I just can't get it to work. How do you usually insert into the child table in a one-to-many relationship? Should i just be using two separate gridviews?
I'm inserting data into a SQL database through a detailsview. When a user inserts an incorrect data type or leaves a required field blank it shoots off to a big error screen. Is there a control that I can use that will allow it to give an error (with a little star or something) that says which field is incorrect without the big error screen?
View 3 Repliesi have a detailsview in insert mode and that is bound to objectdatasource. now the class that is attached to objectdatasource is :
[Code]....
here ResturantId value has to be in session or from Dropdownlist and rest of the value from Detailview. So how to assign that value?
How do I set the value of a field in a detailsview to the selectedvalue of a gridview on the same page? I am also trying to set today date as value of another field in the detailsview as well as UserID. I wrote the following codebehind for the date setting:
TextBox tb = (TextBox)DetailsView2.FindControl("TextBoxCreDate");
tb.Text=System.DateTime.Now.ToShortDateString();
TextBoxCreDate is a template field in my DetailsView.
Unfortunately, I get a Object reference not set to an instance of an object. Error message.
I'm looking to find some command or control that will change fields in a detailsview insert a 0 if there was no data inserted into them. Some example code from my boundfield is:
<asp:BoundField DataField="Assignment_Travel_Time"