Forms Data Controls :: Gridview Results From SQL Statement?

Dec 8, 2010

My sql statement is not functioning correctly. The gridview does post the items correctly but the results are not correct. Can someone assist me with the sql statement where I'm going wrong with it?

I only have one being reffer to the code because I was testing to see it work. Eventually, the search will be base on multi select and the selected items are going to the stored procedure to search for the proper records.

The following is the site code and sql code. -carlos

Site behind code:


View 7 Replies

Similar Messages:

DataSource Controls :: Accessing SQLDataSource Results For If Statement?

Feb 4, 2011

I have a single column returning SQL data source and I want to use the data for a simple if statement, but for the live of me I can't figure out how to do it. *oh for the old days, I wrote the same thing in simple asp in about 45 seconds*


For the life of me I can't figure out how to get that data into a variable or any way to access it. I know its probably simple. I have tried functions, etc off the net but everything I try results in another error.

View 6 Replies

DataSource Controls :: Need To Get A Number Of Results And Do It In One SELECT Statement Or Just One Result Set?

Jan 14, 2010

Im using SQL Server 2005 and im using stored procedures. Is this possible? i need to get a number of results and do it in one SELECT statement or just one result set. Im using MS Chart Controls for reporting and they cant seem to process multiple result sets this is my problem, so basically to run a barchart i need to assign a column to the X axis and a column to the Y axis and it will then display my results.

My stored procedure below returns a result set with columns subpolicy_name, building_name, floor_name, room_name and total_savings. Im just wondering is it possible to split my total_savings column into 4 columns, for example subpolicy_savings, building_savings, floor_savings and room_savings, i need everything in a separate column. If you run this stored procedure you will see the result set.


View 5 Replies

Forms Data Controls :: Populating Gridview Bases On Results From Another Gridview?

Jun 14, 2010

I'm not sure how to search for what I'm seeking, so I'm hoping to be pointed in the right direction.

I have 4 gridviews that contain the same 3 rows of data. For each gridview, I need to create a seperate gridview that will do some calculated values on the parent gridview like A3-A1, to put it in spreadsheet terms.

And at the very bottom I will have a total gridview control that will sum up each row from the parent gridviews. And under that gridview a final gridview to perform the A3-A1 calculation.

View 3 Replies

Forms Data Controls :: Gridview Is Not Returning Results?

Sep 2, 2010

Gridview is not being populated now that i built my objectdatasource in the code behind.. why. If i build the source on the aspx page and configure it that way, it returns results.. but when i try to build it in the code behind it just displays my empty template for the gridview.


View 7 Replies

Forms Data Controls :: Gridview Displaying Results Twice?

Jan 18, 2010

see the below code. just sample page.

test head
test shortnews
Sub Page_Load(ByVal
sender As
ByVal e
As System.EventArgs)
Not Page.IsPostBack()
' bind_events()
Sub bind_press()
ds = Nothing
ds = New DataSet
Dim query
query = "select top 1 * from tbl_press order by press_id desc"
da = New OleDbDataAdapter(query, myConnection)
da.Fill(ds, "Press")
press_dl.DataSource = ds.Tables("Press")
its dislpayes like this
test head test shortnews
test head test shortnews

this gridview displaying twice. i dont know why.

View 18 Replies

Forms Data Controls :: Gridview Does Not Show All Results?

Mar 25, 2010

I have a gridview on a page with search boxes at the top.

The wildcard for these is % so in every serach box I set the default to be % so that when the page loads all records are shown and then they can be narrowed down by what you search for but when the page opens the gridview does not show all results.

Here is my code:

<%@ Page language="C#" masterpagefile="MainContent.master" title="Electrical Storage" EnableEventValidation="false" %>
<asp:Content id="Content1" runat="server" contentplaceholderid="Content">
<div id="Rightside">
<h2>Search Electrical Storage


View 4 Replies

Forms Data Controls :: How To Display Results From Database On A Gridview

Jan 17, 2011

I am using visual studio 2010, 4.0 (c#)

My problem is:

How do I display results from my database on a gridview based on the selected row of another gridview.

For example, I have a e-shop web app and I have a product categories table in my database displaying the data on a gridview.

I want to be able to click on the select button on each row and use that event to populate another gridview based on the ID of the product category that is clicked. E.g say the 'CDs' row is clicked, another gridview shows all the different CDs.

As a result, I need the select(sql) statement for the second table to be dynamic based on what the user clicks.

Has anyone done anything like this before?

View 2 Replies

Forms Data Controls :: Binding LINQ Results To Gridview?

Jan 6, 2010

I am trying to figure out how to bind my link results to a datasource so it can manage/update/edit/insert/delete without me having to do manual coding for all of it. Is this possible?What am I doing?I have used the LINQ to Active Directory to access our AD accounts. I need to make this a webpage frontend of basic search and managing functionality. I have it searching now and adding the results to a gridview but edit is not working now. I was looking online and I saw something about being able to bind linq results to a datasource and then using the datasource to manage all the information for me. Resources I am using:


View 4 Replies

Forms Data Controls :: Binding SQL Query Results To A Gridview?

Aug 11, 2010

I have a gridview that I want to bind the results of a query to it once a user selects a value from a drop down list.

The query selects the same row from the same table but selects different fields based on the drop down list value selected

I get to the query selection but it does not refresh that page with the populated gridview.

Here's the code behind code

protected void ddlQuantity_SelectedIndexChanged(object sender, EventArgs e)
SqlConnection connection = null;
connection = new SqlConnection(ConfigurationManager.ConnectionStrings["PSI_DB_1ConnectionString"].ConnectionString.ToString());
String nEstno = Request.QueryString["id"];
int id = Convert.ToInt32(Request.QueryString["id"]);
string SQLquery = "";
switch (int.Parse(ddlQuantity.Text))
case 1:
SQLquery = "Select Quan1"etc...;
case 2:
SQLquery = "Select Quan2"etc...;
case 3:
SQLquery = "Select Quan3"etc...;
case 4:
SQLquery = "Select Quan4"etc...;
case 5:
SQLquery = "Select Quan5"etc...;
SqlCommand Cmd = new SqlCommand(SQLquery, connection);
SqlDataReader Dr = Cmd.ExecuteReader();
if (Dr.HasRows)

View 2 Replies

Forms Data Controls :: Using Gridview - Alter EmptyDataText Results

Jul 10, 2010

I am working on a site using .aspx controls. Currently I am working on a search feature which searches my database of records and produces all applicable results to the search. Everything works as planned. I have recently added the EmptyDataText line to produce a specific output anytime no results are found in the database. However, I would like to be able to alter/change the appearance of the EmptyDataText output and cannot figure out how to do so. For example, if no results are returned from the search, I would like the EmptyDataText to produce an output of something along the lines of "Your search has produced zero results.

double check your spelling and try your search again." I would like to change the font color, font size, and possibly the thin box which is automatically produced around this output. Is any of this possible? If not, is there another way to produce the desired results? Ultimately, I would actually like to have the results actually use the terms which were input to the search within the EmptyDataText results when no search results are found within my database. For example, if "widget" was used as a search term and "widget" was not found within my database then i would like the results page to state something along the lines of: "Your search for 'widgets' did not return any results. check the spelling and try your search again." Does anyone know how to do any of these things using ASP.Net?

View 1 Replies

Forms Data Controls :: Datatable To Ienumerable - Not Getting Results In The Gridview

Mar 14, 2010

I have a dataset that has two datatables. In the first datatable I have EmpNo,EmpName and EmpAddress. In the second datatable I have Empno,EmpJoindate, EmpSalary. I want a result where I should show EmpName as the label and his/her details in the gridview. I populate a datalist with the first table, and have EmpNo as the datakeys. Then I populate the gridview inside the datatable which has EmpNo,EmpJoinDate and EmpAddress. My code is


My Design is

<asp:DataList ID="Datalist1" runat="server" DataKeyField="EmpNo">
<asp:GridView ID="Gridview1" runat="server">

I do not get results in the gridview, instead have errors. I tried then placing the bound field

<asp:GridView ID="Gridview1" AutoGenerateColumns="true" runat="server">
<asp:BoundField DataField="EmpNo" />

It throwed an error stating / A field or property with the name 'EmpNo' was not found on the selected data source.

View 3 Replies

Forms Data Controls :: Displaying Search Results In Gridview?

Feb 24, 2010

I would like a gridview (using entitydatasource) to display the search results based on values provided in textbox txtSearch and dropdownlist ddlsearch. My search controls are as follows:


My entitydatasource is:


My gridview is written as:


Codebehind file contains:


I am a newbie at entitydatasource and have a few questions:

1. Currently, the gridview doesn't render. Why is that?

2. How do I wire up the gridview to grab the values of ddlsearch and txtSearch and return results using those values from my entitydatasource?

3. Ultimately, I want to encapsulate this gridview in a wizard step wherein the user checks items they want and those checked items are used in the next wizard step.

View 9 Replies

Forms Data Controls :: GridView / Get Into The Select Statement?

Jan 6, 2011

I have walked through other posts with a similar problem but I am very stuck.I am normally use Php/MySQL and am new to ASP (actually only this new client uses it and I'm trying to help them). I am trying to filter a table to only show the last 90 days of records. I found what I thought was the easy solution shown below:

FilterExpression="columnname < GETDATE() - 90"
Or, if you can modify your SQL SELECT statement
SELECT col1, col2, col3 FROM tablename WHERE col3 < GETDATE() -90

However when I added it I get this error:Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Type 'System.Web.UI.WebControls.BoundField' does not have a public property named 'FilterExpression'.I think I have added the code to the wrong place or have another file to edit but I have no clue honestly. The best I can do is show you the file I have the code to in hopes someone may know what this is. Here is the code from the file I added the solution to (my edit is bold/italics/underlined towards the bottom): And shouldn't I have some select statements somewhere like I normally do with MySQL?

<%@ Page Language="C#" MasterPageFile="~/SecureRck.master" AutoEventWireup="true"
&nbsp;&nbsp; &nbsp;Codebehind="Default.aspx.cs" Inherits="SecureRckWeb.Reps.Default" Title="Reps" %>
<%@ Register Assembly="schedule2" Namespace="rw" TagPrefix="cc1" %>


View 9 Replies

Forms Data Controls :: Checkboxlist To Retrieve Data From Database To Display Results In Gridview?

Jun 23, 2010

I have a page where I will insert all the data into the database. The page where I'm having problems is when I select an item from the checkboxlist it only displays one item. The data which is displayed is only the one that was inserted with one selected item from the checkboxlist. The following code is the page I'm using to try to retrieve the data from the database. I am trying to do is when a user selects the first, second, or third, or fourth item. The corresponding data appears in the gridview. In my current code, the record which has one item selected appears. If the user has more than one selected it does not appear. It comes up as empty. Is there a way I can do it?


View 4 Replies

Forms Data Controls :: Gridview With Results Count Like In Footer Or Pager

Apr 1, 2010

Can i customize gridview to show Reuslt summary in the footer or pager like

[Results: 1- 10 of 2000]

View 4 Replies

Forms Data Controls :: Hiding Gridview Results In Page Source?

Apr 28, 2010

Working on a site where a user does a search, it takes the input from the user and then runs an SQL command to return the data in a gridview for the user to see. I also have a button where the user can see all the results from the DB (this will be taken out later but for now the DB is pretty small) This is all working fine, but the problem I am having is that when you look at the page source the gridview populates everything in tables on the page. This makes it really easy to just copy and paste and get everything from my database. How can I go about displaying the information to the user in a gridview, but hiding the table information in the html page source?

View 6 Replies

Forms Data Controls :: Gridview - Update Statement Error?

Apr 29, 2010

I'm quite new to I use MS Visual Studio 2008 and MySQL database. When I try to edit a record via gridview and the generated UPDATE syntax I get an error.I inserted a gridview into my web application and connected it to my database (all is OK). Then I checked for auto generation of update and other syntax:


When I test in a browser I get a pop window form for editing a record. But when I click "update" I get the following error:"You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '?, strSkrajsanNaziv = ?, strKraj = ?, strDavcnaSt = ?, SkupinaID = ? WHERE Stran' at line 1"what's wrong with the UPDATE syntax? Is this syntax only valid when using MSSQL?

View 6 Replies

Forms Data Controls :: Conditional Eval Statement In Gridview?

Nov 18, 2010

I have a conditional Eval statement in a Gridview that returns a boolean result to display an image if two datafields(strings) are identical:

Visible='<%# Eval("customerA").Equals(Eval("customerB")) %>'

Works great except I don't want the image to display if both datafields are empty. How can I add that logic into this Eval stmt?

View 3 Replies

Forms Data Controls :: Gridview : Working With A Variable In A SQL Statement?

Mar 21, 2010

On Page1 of a project, I have a Gridview showing a table of customer names (showing CustID, CustName, CustJoinDate). When I click on a record, I have passed a querystring to Page2 showing an address table for that customer. This part works for me.

The SQL statement in simply: Select * from CustAddress where CustID = @cust

What I would like to do though, is capture that @cust to a session variable so that I can use it later on.

View 2 Replies

Forms Data Controls :: Manually Binding GridView With SQL Statement.?

Feb 9, 2010

I have a gridview that I am manually binding in my code behind page because I have to pull out information from other sources for the WHERE clause.The issue is that I get an error on the aspx page that one of the columns is not in the dataview, however when I run the SQL statement in SQL all the columns are there and there is not a spelling error.If I remove the column from the gridview then the page loads.I cannot see why the column is a problem.Here is my ASPX gridview code.


This is the line where the error occurs. <asp:Label ID="Label2" runat="server" Text='<%# Bind("date_submitted") %>'></asp:Label> Here is the code behind


Here is the ending SQL statement that works in SQL and does return the date_submitted column. SELECT id, title, date_submitted, (SELECT username FROM users WHERE (id = t.submitted_by_user_id)) AS submitted_by, (SELECT name FROM departments WHERE (id = t.department_id)) AS department FROM tickets AS t WHERE (closed_by_user_id IS NULL) AND (department_id = 48 OR t.department_id = 83) ORDER BY t.date_submitted DESC

View 2 Replies

Forms Data Controls :: Changing Gridview Bind Statement?

Mar 11, 2010

I'm attempting to bind multiple datasources to a single Gridview. Can someone direct me on how to change the below <%# Bind("") %> programatically in the code behind. For example, change "HRID" to "PayrollID" to account for a different column. the dataSource binds to the Gridview so the Rows will not be created yet.

I know how to accomplish this with a boundField, but I'm having issues with setting the text of the label in the ItemTemplate.

<asp:TemplateField HeaderText="ID">
<asp:Label ID="lblHR" runat="server" Text='<%# Bind("HRID") %>'></asp:Label>
<asp:Label ID="lblNewID" runat="server" Text=""></asp:Label>

View 4 Replies

Forms Data Controls :: Loop Through GridView For An Update Statement?

Mar 22, 2011

I need to loop through a GridView and get the values of a databound field. Then use those values in my update statement.

Here is the GridView:


And here is my UPDATE statement, which is actually just passing the values to a stored procedure:


Right now, I just have it grabbing the text from a label control, but I know that will not work as it only passes one value. I need to be able to update multiple rows based on the del_doc_num.

View 15 Replies

Forms Data Controls :: GridView Caching / Updating With The Latest Results Of The SQL Query

Jun 17, 2010

I have 2 gridviews on a webpage that are fully editable. I also have a button, that when clicked, runs some SQL in codebehind to insert new rows into a data table. The gridview should then update with the latest results of the SQL query, which is does.

Then the user clicks on to the next page to do the next thing.The problem is, when they go back to the first page, they're still seeing the old, non-updated data. I've run the SQL from the page manually on the server, and the new data is there, but the GridView doesn't want to pull it.

View 2 Replies

Forms Data Controls :: Joining Multiple Tables To Show Results In A Gridview?

Mar 4, 2011

I have been trying to make this work for a while, but I have not been yet able to figure this put. I am using VS 2008 and mysql database. I wrote a query and checked to see if it works in database. It does.

I have a gridview, whose select command is that query. But for some reason, I just get all the rows from one table only. I rechecked my datasource and it is ok. I read on some discussions that it is NOT possible to have data from two tables in a gridview. Is that true? If that is not true, how can I have data from multiple tables in a gridview? Or any other web control for that matter.

View 6 Replies

Copyrights 2005-15, All rights reserved