Forms Data Controls :: Gridview With Save Button - How To Tell If A Row Changed
Feb 1, 2011
I have a Gridview with about 6 templated columns hooked up to SQL, with a Save button below the grid.
When save is clicked, I loop through each row, and write each row back out to SQL.
Can you recommend a good way for me to tell whether the row has changed so I can avoid re-writing the row when nothing has changed?
This is not only for performance, but I also have a request to write out a "Last Modified Date" along with each record. So for that, I would need to know whether the row has changed.
I saw someone mentioned that the Gridview.RowState could be used for this, but I don't see how.
One alternative I see is to re-read each row from the database first, to see if anything changed. Another alternative might be to set a dirty-bit on each Textchanged, SelectedItemChanged, etc, for the row, but I'm not sure where to store that.
View 1 Replies
Similar Messages:
Jun 15, 2010
i want save the gridview in buttonsave event..
here i wrote the code like this
for (int i=0;i<gridview1.row.count;i++)
{
label lbl=(label)gridview1.rows[i].findcontrol("lbl");
Textbox txtname=(Textbox)gridview1.rows[i].findcontrol("txtname");
}
here i got the textbox value but am not getting label value how to get that label value..
View 8 Replies
Feb 3, 2011
Type: 28978 into this site: [URL]
Students have to chose a subject in a row. This will be updated in the table above.
I use this Stored procedure:
[Code]....
I would like my button to Insert/Delete records in the table. How can a button in a GridView row choose parametres form the right row?
My code...
[Code]....
View 9 Replies
Mar 9, 2014
I am creating a asp page with database values.And I am showing in Gridview.in addition I need checkbox for each row. When I mark checkbox the row values to be stored in another table.
View 1 Replies
May 7, 2015
As I am creating a asp page with database values.And I am showing in Gridview.in addition I need checkbox for each row. When I mark checkbox the row values to be stored in another table.
View 1 Replies
Jul 26, 2012
I have a from in which upon pressing submit button all the data were appear on the grid.But i want to do one thing over here which is that at the end of the gridview there was a button upon clicking on that button all of the data were go directly to the database...
View 1 Replies
Apr 4, 2010
When I create buttons in my Details View using the AutoGenerateEditButton they are created with Links. Is there a way to change this to Buttons?
View 2 Replies
Jul 24, 2010
i have a gridview that show data from sql data source . how i can make a button for save as gridview data into mdb access file !?
View 6 Replies
Feb 25, 2016
I came across the below article, I would like to know how to properly respond to the drop or stop event so that I can show the Save button only once someone changed the order. In other words, I would like the Save button hidden initially, only to make it visible once a drag and drop has occurred.
[URL]....
View 1 Replies
Sep 23, 2010
does anyone know if the gridview can tell you if a cell's contents have changed (during an edit) in order to determine if an update should be made against the database?
View 5 Replies
Jun 26, 2010
I have a dropdownlist as a template item in a gridview - it populates fine and with the right values. I have an SelectedIndexChanged on the dropdownlist, and has set it for postback. In the SelectedIndexChanged event, I would like to know where the control that fired this event is, - which row in the gridview is it in? How do I get this info? If the row was selected it would be easy, but the only thing that has happened in that row is that the dropdown has changed value and consequently the SelectedIndexChanged event has been fired - is that enough to know which row the event has been fired from?
View 1 Replies
Oct 13, 2010
I have Gridview which allows user to edit record.I already build the event to save the new record, time and user machine information to a log database.However, this means a whole record is saved to the log... if the user just change one or two column/field out of say 20 fields, then there is a lot of waste. Also the change is not obvious.How can I log exactly which field(s) was changed in the record ?
View 1 Replies
Feb 1, 2010
I've got a GridView in which all rows are set to Edit by default.
I want to be able to save the rows only where changes have been made. At present, my code will only update the first row from my GridView to my database. I've had a look on the internet, and think that the Getchanges might be able to help me, but I'm struggling to work our how exactly to implement it in my scenario.
[Code]....
View 2 Replies
Oct 22, 2010
Need to have the ability to change the view of my gridview based on button click, the easiest i can describe what im trying to do and need is if you have every been on any e-comm site where you get a list of items presented to you.. normally you may get a thumbnail, description and price.. but at the top of that list you get the option to view it as a list with no thumbnails and so on..
Is gridview the best control to be using if i want to do that? example of what im needing is similar to walmart.com
if you search for a product doesnt matter, when the results are presented to you, you have it in what they call "List View", but you have the option to view it in "Grid View", not sure if they are actually using listview and gridview controls.. but i want the same end results..
What would i use or what can i search on to accomplish the same thing.
View 4 Replies
Jan 14, 2010
I have a gridview with paging. I have a style set for a selected row (highlights the row in light orange). What i would like to do is that each time a user chamges the page, the selectedIndex & selectedRow automatically becomes the 1st row of the selected page. So i would like to see the orange highlight on the 1st row of the page to indicate that the row has been selected.
I have tried GridView1.SelectedIndex=0 but this only seems to select the index of the 1st record in the whole datagrid. Does anyone know of how to set the 1st row of the page to the selected row each time the pageindex is changed?
View 2 Replies
Oct 25, 2010
I have a gridview that is being databound by an SQLdatasource and on RowDataBound i am doing a calculation and then setting
e.Row.cells(17).text = Result
However, when I go to sort it on the website it sorts it based off the previous values.Cell(17) from the datasource reads in all 1's. The numbers I change it to range from 0 to 15. So when I click sort nothing changes because it sees it as all 1's.How can i make the gridivew sort off the changed text values?
View 3 Replies
Feb 14, 2010
I have a gridview that loads with a new datasource on button click event. On the gridview (which is located in a table columm incidentally) are 2 columns, a descriptor and a checkbox. The problem is that after postback, the column widths change, the checkbox column expands and the other column contracts. Is there a way to keep the gridview column sizes the same after postback?
View 2 Replies
Jun 14, 2010
I have a gridview where I am opening a popup page when user selects a row. If I am not using update panel then Select button is able to open popup page.
If I am adding Update panel, the popup page is unable to open. What could be the cause?
[Code]....
View 2 Replies
Sep 10, 2010
I have a gridview control that extends the default gridview. I have added an attribute called "hiddenSelectedValues" to to the gridview during the "PreRender" event and I have a private variable that points to the value of that attribute.
I have some javascript code that modifies the value of this attribute based on the user checking or unchecking checkboxes in the grid. I have confirmed that the javascript is indeed modifying the value of the "hiddenSelectedValues" attribute by using Firebug to see the change as it happens.
However, once a postback occurs, the grid looses the updated value of this attribute and I am unable to reference get the updated value on the server side.
How do I keep the value of an attribute changed by javascript on postback?
View 2 Replies
Feb 17, 2010
How do you save a radio button selection to a DB (within the .aspx page)? I have 5 sets of "yes/no" radio buttons (1 for yes/ 1 for no). Do I just add each radio button as a field into the DB and if its not selected, leave it NULL (or whatever the default value is)... this does seem very efficient.
View 1 Replies
Jan 6, 2010
i have a listview which contains a text box and a drop down control (which makes it kind of a layout ...a text box along side a drop down control in each row). there can be any number of rows in the listview depending upon a user entry (an integer).
after i have filled all the text boxes and changed the drop down controls to their associated values (for each text box), i want to save everything that i have filled. i have a SAVE button OUTSIDE the listview, and i want to (probably) iterate through all the rows of the listview and save all the contents in the textboxes to a collection object, where each collection item will be a row with textbox's text and dropdown's selected index value.
View 1 Replies
Feb 24, 2010
I am using ListView for the first time. I have a requirement that in a listview if I Edit a record and before clicking teh Edit button of tthis record if i click on the "Edit" button in other record, my first record should be saved and second record should open in Edit mode.
View 2 Replies
Mar 9, 2013
<asp:DropDownList ID="ddlday" Width="100px" runat="server" CssClass="iselect" Autopostback="True"
AppendDataBoundItems ="true">
<asp:ListItem Text="--Select--" Value="0" />
<asp:ListItem Text="Full" Value="1" Selected="True" />
<asp:ListItem Text="Half" Value="2" />
</asp:DropDownList>
I have a dropdown in gridview. I bind the gridview after not ispostback condition. Now if i select drodown lsit value "Full" from the first row of gridview i need all other rows of dropdown in gridview to be selected "full" programtically and after that if the user wants to change other row dropdown to "half" then he can change it.
View 1 Replies
Sep 19, 2010
I have a grid view where the user can change pages at either the top or the bottom of the grid view. I want the view to go back to the top whenever a user changes the page, whether they are changing from the top or the bottom. I've tried using anchors and javascript to achieve this but it does not work. The javascript is executed and the user is taken to the top of the gridview, this can be seen by placing an alert after the javascript to change the view. But the last thing that happens on the page change is that the window is returned to it's previous position (the bottom of the page). Is there any way of doing this?
View 4 Replies
Dec 16, 2013
I am using a dropdownlist in my application and it has corresponding SelectedIndexChanged() event.I would like to invoke GridViewEdit Event when SelectedIndexChanged event fires from dropdown list.Is it possible to implement this...??
<asp:DropDownList ID="ddlStatus" Visible="true" AutoPostBack="true" OnSelectedIndexChanged="ddlStatus_SelectedIndexChanged" runat="server">
</asp:DropDownList>
protected void ddlStatus_SelectedIndexChanged(object sender, EventArgs e)
{
//Code to fire the GridViewEdit Event to put a row in edit mode
}
View 1 Replies
