Is this possible? I programatically change the selected index when a certain event is fired using this code:DropDownList.SelectedIndex = DropDownList.SelectedIndex + 1ow I want to update a corresponding textbox with the text that is in the new SelectedIndex of the DropDownList via postback.I know how I can do this in javascript
View 1 Replies
how do I set the SelectedIndex of a DropDownList based on the SelectedValue
View 8 RepliesI have a repeater with a DropDownList in it. I set the datasource of this list in the itembound event en set the selectedindex. When I debug the selectedindex is set, but when the page is done loading for all the item the default item is selected.
protected void Repeater1_ItemDataBound(object sender, RepeaterItemEventArgs e)
{
var ddl = (DropDownList)e.Item.FindControl("DataFeedItems");
ddl.DataSource = FilterDropDownData();
ddl.DataTextField = "ColumnName";
ddl.DataValueField = "ColumnName";
ddl.DataBind();
[code]...
I searched the forum for several days now , but can't find an answer to my problem.
I have 4 Ajax Cascading DropDown named,
ddlCatalogueName > ddlMainGroup > ddlSubGroup > ddlPageNumbers ,
I am passing the values obtained from ddlSubGroup and ddlPageNumbers to a datasource as parameter (Actually to a pageddata ) , on which i create a DataList.
The page is working fine actually but the problem is like the following,</p>
Considering that all dropdown are selected as following :
When i change ddlSubGroup to another one , ddlPageNumbers is populated depending on the number of items divided by 20 ( The datalist is paged by 20 items per time)
then i change the ddlSubGroup(RUBBER PARTS in this example for example to BodyParts , so the dropdown values becomes like :
[code]....
At this point Body PARTS also has page numbers like 1,2,3,4 etc but, it still remains as 2 , however i need the page number to reset back to 1.
Is there any way to do this , and where should i place the code exactly ( which event ) ?
I have a dropdownlist in DetailsView to which items are added programmatically during DataBound event. It is working fine in InsertItemTemplate, but in EditItemTemplate i am getting this error "'branchDDL' has a SelectedValue which is invalid because it does not exist in the list of items. Parameter name: value".
. Following is the code:
<asp:TemplateField
HeaderText="Course"
SortExpression="branchID">[code]....
I have a WebForms page that has two DropDownList controls on it that both contain a range of temperatures from 60-80 degrees, one for heating the other for cooling. They are declared in the .aspx as:
<asp:DropDownList ID="heating" runat="server" />
<asp:DropDownList ID="cooling" runat="server" />
The values for each list are populated in the code-behind using:
for(int i = 60; i <= 80; i++)
{
var listItem = new ListItem(i + " degrees", i.ToString());
heating.Items.Add(listItem);
cooling.Items.Add(listItem);
}
When I try to set the selected value for each DropDownList using the values in an object containing data loaded from the database using:heating.SelectedValue = myHome.avgHeatingTemp.ToString();
cooling.SelectedValue = myHome.avgCoolingTemp.ToString();
The SelectedValue for both lists is set first to the value in myHome.avgHeatingTemp, then to the value in myHome.avgCoolingTemp. Heres what the values are for each variable after each step of the process of setting the SelectedValues:
Initial State
heating.SelectedValue: 60
cooling.SelectedValue: 60 [code]....
I have 3 security question drop down menus. I have javascript on the ASPX page that removes questions/repopulates them when you select a questions (so you cannot reselect the questions in the other 2 boxes). This works wonderfully when a user is editing their profile with already selected questions. However, when a user first selects the questions where all three boxes are listing "select a question" at selectedIndex 0, the onChange doesn't fire. The function won't even go. I think this has a big something to do with the on change from selected index of 0. I have debugged this thing and it doesn't even enter the function. I even set the onchange action to flash an alert. It just seems something is going wrong when i try to action onchange from selected index of 0.
View 2 RepliesI have a dropdownlist, who's items I bind from the codebehind file of an asp.net web page. After databinding, I want to set the selected index as the last item in the list, thus:
[Code]....
However, this does not work. When the page is done loading, the selected index is still zero.
I have a DropDownList in a DetailsView, which binds a user's 'AllocatedUser' to a user in the Users table. Occasionally, we'll have some mishaps in the database where the user allocated isn't in the users table, which the DropDownList is filled with. In this case the site crashes and we get a 'SelectedValue does not exist in the list of items error'.What I want to do is catch any binding errors like that, and just set the DropDownList index to 0. I've tried something like this:
OnDataBinding='DoesExist("AllocatedUser",<%#Bind("AllocatedUser")%>)'
but it doesn't like the syntax of that.
I wanted to create a dropdownlist that would trigger an asynchronous postback and update the Gridview inside the Updatepanel. However, no matter what I do, when the dropdownlist changes, nothing in the UpdatePanel will change, even the TestLabel....I've been banging my head against the walls for days on this -- why won't this work? When I remove the UpdatePanel code and triggers, all the code works, eg, you change the dropdownlist andthen gridview updates -- but it refreshes the page and this is why I wanted to put the Gridview inside an Updatepanel to make it look cleaner.[Code]....
View 9 RepliesI'm having trouble binding my textbox to my dropdownlist. I got it to work but I don't think it is the correct way of doing it. I have my DDL bound to a datasource and populating everything correctly. However, I couldn't find a better way of binding my textbox to it besides using the FormView control and its counterpart, Templates (edit,insert,etc) It looks messy and i was hoping there was a better way of doing it. I've researched it online for awhile now but I couldn't understand how to implement for my situation.
My DDL has company names in it and the datasource has all the information from the table including what I'm trying to have my textbox pull (Address).
I have dropDownList in EditItemTemplate in DataList which is used to choose value from possible ones.
To display cuurent value I used SelectedIndex='<%# (int)(QuestionType)Eval("Type") %>' inside he dropDownList.
But then I started to dataBind dropDownList dynamically and it stopped working...
Why? When does the code in SelectedIndex='<%# this code %>' works?
LinQ / DropDownList gives error on selectedindex
[Code]....
I have a datalist where each item consists of a textbox and a dropdownlist. I want to get the datakey value when a selected dropdownlist item changes. I can get the selected value of the dropdownlist, but I can't figure out how to get the key field value of the datalist row item that the dropdown resides in.
[Code]....
[Code]....
i can populate cascading dropdownlist by using webservice now. but may i know how do i trigger function while selectedindex changed? (without using auto postback...)
View 3 RepliesI am generating Dropdownlists to each row that I get of a database table and then bind them to an asp table.
I am doing the paging of the asp table myself. I'm just adding the rows regarding to the page.
Example: Page 2 (10 rows) => Rows 11 -20
The problem is, when I click a next button to get to the next page. The selectedindex of dropdownlists on the next page are getting overwritten.
I am loading the table in the page_load.
Here is some code of page_load[Code]....
And this is my load_table:
[Code]....
I'm trying to do a similar thing -- I have a long form and in part of it, I have an updatepanel.
Inside the updatepanel I have:5 dropdowns (using the CascadingDropdown functionality)One AddProduct ButtonGrid or Repeater (haven't set it up yet)
I want the following to happen:I have the AddProduct Button disabled initially, but I want it to be enabled once the 5th dropdown is selected (so OnSelectedIndexChanged).If they click the AddProduct button, I want it to populate a Grid or Repeater.So far I am just trying to show what the selection was in a label... but nothing happens. I have an OnSelectedIndexChanged function for the last dropdown, so it enables the button, but that doesn't appear to get called. Previously, before disabling the button, I tried updating the label on button click -- and nothing there either.
It just seems like, because they are in the updatepanel, those callbacks never happen. I also do have UpdateMode = Conditional and I have both items in the triggers list.
I am trying to use Yes No Confirmation Message Box but the code below here which i found here uses a button to raise the confirmation message box but what i would like to use is a DropDown. How can i modify the code and i use drop-down box instead of using a button? here is the javascript code:
<script type = "text/javascript">
function Confirm() {
var confirm_value = document.createElement("INPUT");
confirm_value.type = "hidden";
confirm_value.name = "confirm_value";
[code]....
but here is what i would like to use is drop-down instead of the button:
<div>
<asp:DropDownList ID="ddl" Width="300px" runat="server" AppendDataBoundItems="true" OnSelectedIndexChanged="ddl_SelectedIndexChanged">
<asp:ListItem Text="test1" Value="test1"></asp:ListItem>
<asp:ListItem Text="test2" Value="test2"></asp:ListItem>
<asp:ListItem Text="test3" Value="test3"></asp:ListItem>
</asp:DropDownList>
</div>
I binded the dropdown from the table Languages, now it shows all the languages:
ViewData("Languages") =
New SelectList(objLang,
"SysLanguageID",
"LanguageName")
Now when I click the edit then the dropdown should show the selectedvalue based on the languageId that is in stored in the Preferences table under the user.If i give the third parameter as the selectedvalue it is showing the selected value but it is not showing the other languages.
I have nearly 15 dropdownlist on my web form, and one text box,
any of the selectedIndex change, the total must be reflected to text box,
actually, I have different different value in all dropdownlist, I want average in textbox,
So, I want that,any of the dropdown selectedindex change the average must be reflected in textbox,
I can do it by writing in every dropdown's selectedIndexchanged event,
but, I know that is not correct way,I want dynamically,
I have a dropdownlist that is populated by a webservice using the ajax cascading dropdown. I have not been able to set the selected value using javascript. It appears that the values do not exist when the javascript runs. I placed the javascript at the bottom of the aspx page
<asp:DropDownList ID="ddlBusinessArea" runat="server"></asp:DropDownList>
<cc1:CascadingDropDown ID="CascadingDropDown1" runat="server" TargetControlID="ddlBusinessArea"
Category="BusinessArea" ServiceMethod="GetBusinessArea" ServicePath="DropDownFilter.asmx"
LoadingText="Please Wait.....">
[code]...
It seems to lost all the Dropdownlist controls on postback ... and I save array dropdownlist in Session but I can't get selectedvalue from dynamic dropdownlist. Dropdownlist only get first selectedvalue
Here're my code
[Code]....
In file aspx [Code]....
Result Label : 01 - 11 -
On an aspx page I have a dropdownlist and a button.
I select a value from the dropdownlist and click the button.
In the button event handler I have the statment: DropDownList1.SelectedValue;
This value is showing up as the first item in the list regardless of what item is actually selected.
Same result with .SelectedItem.Value and .Text
Why? And how do I get the item actually selected?
I have a databound dropdownlist on a page, where in the page_load I set the selectedValue (inside a 'not isPostBack').
Although the page displays fine and shows the correct item as selected.. inside the page_load if I try and get the selectedValue() and display it to the screen, I always get null... selectedIndex is -1.
I have a button, which when clicked refers to this ddl's selectedValue, and here it pulls through the the expected result.. so how come I can't see it immediately after setting it, while still in page_load?
edit: the code..
ddl declaration
<asp:DropDownList runat="server" ID="dlCountryList" DataSourceID="dsCountryList"
DataValueField="countrylistid" DataTextField="description">
</asp:DropDownList>
and the page_load
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
dlCountryList.SelectedValue = "GR"
Response.Write("*" + CStr(dlCountryList.SelectedIndex) + "*")
End Sub
I am using a dropdownlist in my application and it has corresponding SelectedIndexChanged() event.I would like to invoke GridViewEdit Event when SelectedIndexChanged event fires from dropdown list.Is it possible to implement this...??
<asp:DropDownList ID="ddlStatus" Visible="true" AutoPostBack="true" OnSelectedIndexChanged="ddlStatus_SelectedIndexChanged" runat="server">
</asp:DropDownList>
protected void ddlStatus_SelectedIndexChanged(object sender, EventArgs e)
{
//Code to fire the GridViewEdit Event to put a row in edit mode
}
