MVC :: Ajax Loaded Partial View Form Submits Multiple Times?

Feb 2, 2011

I am trying to implement an ajax form inside of a jquery ui dialog.

I have a view with a button that opens the modal dialog form, makes an ajax call to an action that loads a partial view into the dialog. The partial view consists of a form created via Ajax.begin form. When I post the form I close the modal and update a div on my main page. This all works fine.

The problem is, the next time I open the modal and submit the form the http POST for the form is called twice. The third time I open/submit the form is submitted 3 times and so on...

It seems as if the submit button/form is bound multiple times and I cant figure out how to fix this.

Here is my code...

first the jquery call to load the ajax form partial view and create the modal...


here is the ajax form partial view...


and the js callback when the form is submitted


View 4 Replies

Similar Messages:

MVC :: Using A Partial View Multiple Times On A Page?

Feb 17, 2011

I have the JQuery tab control on my page and each tab will be using the same partial view with a filter set of the model. What is the best way to do this?

The only thing is the data needs to be filtered before it gets to each partial view.

I am currently putting the filtered model data in ViewData but I do not know how to reference that in the partial views.


In my partial view:


View 3 Replies

C# - Submit A Form Via AJAX And Return A Partial View - MVC2?

Dec 17, 2010

Seems like there are a lot of ways to solve this problem.

Currently I make a partial view with a form like so:


What are other ways to accomplish the same thing and what are the pros and cons vs what I am doing?

Is Ajax.Form useful?

View 2 Replies

MVC :: Cascading Action For Multiple Partial View In One View?

Nov 1, 2010

I would like to create one view for my CRUD actions. The view contains 3 basic DIV updatetargets ("search form", "search result listing" and "action" (would be create,detail,edit,delete). Basic flow would be: "Search" updates the "Search Result Listing", click on CRUD actions in listing would show partial view in "action".

how do I call to refresh the "Listing" after I do any add/update/delete without having user click search again?



Result Listing:


View 1 Replies

MVC :: Using A Partial View To Render A Section Of A Form Twice

Aug 23, 2010

I'm trying to figure out if there's a good way to remove the duplication in this scenario. Here's the model ... a Person that contains two Addresses:


And here's the view:


The entire Address block is duplicated ... one for the Home address, one for the Work address. To remove duplication, I tried factoring out the Address block into a partial view, and doing this in place of the two divs above:


And the page renders fine, but when it gets posted back on form submit, the model binding doesn't work. (Of course it doesn't work ... the <input> tags for the address blocks both have name="Street", so there's no way for the model binder to know whether to shove that into HomeAddress or WorkAddress.)

I read this post:

[URL] but that answer seems most unsatisfactory. Is there a better solution?

View 1 Replies

MVC :: Mvc 3 : How To View Containing Partial View With Form

Mar 27, 2011

I have an Index view that shows a list of employees and a Create partial view with a form and submit button to create employees. In the Index view, I have:


A user sees a blank form to create employees and a list of employees. After the user has typed data in the form and clicked the submit button, the form should become blank and the list of employees should be refreshed, showing employees plus the new employee.

The problem is I don't know what to return from the Create action:

public ActionResult Create(Employee employee)
return ???

View 12 Replies

MVC :: Passing Multiple Viewdata To A Partial View?

May 11, 2010

i need to pass multiple viewdata to a partial view from controller

View 7 Replies

MVC :: Posting Form Data From Multiple Partial Views On The Same Page?

Feb 8, 2011

I have view that dynamically adds multiple partial views with a foreach statement with the standard <%Html.RenderPartial("partialName", model); %> . The partial view control has just a label and textbox control. When I view the source html generated it correctly has a single form control around all the multiple labels and textboxes. My single submit button, inside the form though does not send any of the form data back to the controller though when using FormCollection.

View 1 Replies

MVC :: Multiple Instances Of Same Partial (with Same View Model) Messes Up Validation?

Jan 27, 2011

This project I'm working on have this custom clientside JavaScript validation framework created for (which I cannot change) that show error messages/summary based on your data annotations and a "Validate" method in your ViewModel.

Like I said I'm not allowed to change this, so wont be able to go with suggestions doing that.

What the person that created this did not foresee, is that one might need put several partials of the same type and having the same view model (each in a form) on a view.

So I went ahead and did things the normal way (using Html.whateverFor<model => model.whatever) and wala!....the custom validation thing throws error messages for the specific form fields, next to each form in the view. I was suggested to create a "prefix" for each instance of the view model, and do something like this:

Change: <%: Html.HiddenFor(model => model.AccountNumber)%>

To: <%: Html.Hidden(Model.ElementPrefix + "AccountNumber", Model.AccountNumber)%>

Not to mention the tons of jquery selectors and all that I have to go change (and all my view inputs)

(I just hate having to find workarounds for this "custom" everything they created for this project)

View 9 Replies

MVC :: Unobtrusive Validation Not Working On Form Loaded By Ajax

Feb 10, 2011

Is it possible to validate a form that has been loaded dynamically by Ajax? I have two forms that I load on a page with another form and niether of the Ajax forms can be validated.

View 14 Replies

Ajax - Control Appears Multiple Times?

Oct 5, 2010

i have to two buttons in aspx page. i added ajax functionality to the page. but now thesee two button appears twice when i run the page.

View 1 Replies

Auto Submits Form With Only One Textbox?

Jun 1, 2010

look at this code:

<%@ Page Language="C#" AutoEventWireup="true" CodeFile="test.aspx.cs" Inherits="test" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "">
<html xmlns="">
<head runat="server">
<title>Untitled Page</title>
<form id="form1" runat="server">
<input type="text" />

When I hit the enter key, when the input box has focus - the form submits. If I add another input box it doesn't submit. How can I avoid the auto submit when there's only one input box?

View 1 Replies

MVC :: How To Render A Partial View Multiple Time On User Action Like Button Click Event

Jan 19, 2011

I need to render a particular partial view multiple times inside a view whenever user perofrm an action like button click event.How we do it in mvc?

View 9 Replies

AJAX :: Change Event Triggered Multiple Times?

Mar 31, 2011


When the popup opens, the following code is run:

if (window.attachEvent) {
$("#rblQuickPick").change(function () {
alert("something changed!");

ClickQuickPick() is the code I will eventually run, but I put in the Alert for testing.

The issue is that when the popup extender opens, and I click an item, I get the alert once. If I click another choice I get the alert twice. If I click another choice I get the alert three times, etc.

What is triggering the event to repeat, and how do I stop it?

View 1 Replies

AJAX Binds Jquery Events Multiple Times?

Mar 29, 2010

I have a masterpage setup, with a pageLoad in the topmost masterpage, which calls pageLoad2 for nested masterpages which calls pageLoad3 for content pages.

In my content page I have a jquery click event and in my nested masterpage I have a web user control.

Whenever I use the user control in the nested masterpage, it rebinds the click event in the content page (undoubtedly because the pageLoad3 is called again), but this makes the click event fire twice on a single click. The problem gets worse the higher up masterpages you go (eg. fires 3 times if user control from topmost masterpage is called).

how to make sure it only binds the jquery events once?

View 2 Replies

AJAX :: InsertCommand - Adds The Record Multiple Times

Jun 22, 2010

I have a InsertCommand function i am using to insert the dropdownlist in my updatepanel. When the Add button is clicked. It adds the record multiple times. Am not sure why it does this. Here is my code.

Dim Bank_number
DropDownList = UpdatePanel1.FindControl("ddlbank")Dim
NoteAccountNumber As
DropDownList = UpdatePanel1.FindControl("ddlAccount")'
lblsee.Visible =
'now collect selected information on the drop down
= ddlBank.SelectedValue.ToString"noteaccountnumber").DefaultValue
= ddlAccount.SelectedValue.ToString'Insert into db

Also, i was woundering if any of you might know the logic behind clearing inserted data from the dropdownlist once its inserted. I am trying to make sure data is not entered mulitiple times. Unique Indexing comes to mind but thats only on the backend.

View 3 Replies

AJAX :: The Script 'Timer.js' Has Been Referenced Multiple Times?

Aug 16, 2010

I am having a problem with ajaxcontroltoolkit 3.5. I am getting the following error

"Microsoft JScript runtime error: Sys.InvalidOperationException: The script 'Timer.js' has been referenced multiple times. If referencing Microsoft AJAX scripts explicitly, set the MicrosoftAjaxMode property of the ScriptManager to Explicit."

I have migrated ajax web app from 2.0 to 3.5 and have changed ScriptManager to ToolkitScriptManager.

View 4 Replies

Web Forms :: Form Submits After Validation Error?

Dec 28, 2010

I have a form with a number of validators. When I click my Submit button the validators fire and I can see my error messages, however the Form still submits and calls my onclick event. Does anyone know what's causing that? The form shouldn't submit with errors.

<asp:Button ID="Button1" runat="server" Text="Submit" onclick="Button1_Click" />

View 1 Replies

AJAX :: Exception While Using Slider Control Multiple Times In A Page?

Jul 19, 2010

I am using slider extender in an user control. I am adding that user control 2 times in a page. At that it gives me an error saying "Two components with the same id 'Slider1' can't be added to the application."

I am using Latest Version of AjaxToolkit and VS 2008 with .NET FWK 3.5.

View 1 Replies

Keep Text Flat File Open Between Form Submits?

Mar 28, 2011

I'm using a log file to document info while getting and processing info from a form

1. if not post back, open the log file, build page, send form. 2. get submit back from form, possible post back if errors, possible writes to log file, if no errors definitely writes to log file, and send confirm page. 3. postback from confirm page can either be going back to form or finalizing, and send acknowledge page, then done.

so I need to keep the logfile object between direct postbacks to the form, or posting back to orignal form page after gettting a postback from a confirm page.

this type of file setup works fine, it creates a single log file per day:


then successive writes are like this:


when the form submit comes back from the original send/submit, lf from above is 'nothing'

saw the post about 9 ways to maintain state, not sure at all which would be most appropriate to keep the lf object accessible between possible postbacks and submits to the form.

View 4 Replies

Html - Pressing ENTER In A Textbox And Form Submits?

Sep 4, 2010

it's a simple question and yet i couldn't figure how this works.I created an aspx page without any master page.Put one text box on the form.then use Internet Explorer 8 and visit that page.typed something and hit ENTER on the keyboard. The form submits (judging by that page being refreshed). I didn't even put any buttons on the form. Just the textbox. What triggers the postback?I further added one < asp:Button > next to the textbox and wired the button to see if it's been clicked.

i repeat the same thing, typed something in the textbox and hit ENTER on the keyboard. The form submitted but the button wasn't click. What's happening? How the postback is triggered if it's not from the button?
This is happening in Mozila Firefox too except that when i added a button on the page, the button will be hit when ENTER on the keyboard is pressed.Can anyone shed some light as to why the button i added didn't respond to the ENTER on the keyboard in IE8?

View 1 Replies

Web Forms :: How To Create A Form That Submits To A SharePoint List

Jun 29, 2010

How do I create a form for a public site that submits to a sharepoint list on a protected site? I am trying not to use InfoPath form.

View 2 Replies

Security :: Asp:LoginStatus Logout Link Submits Form On The Page

May 5, 2010

I am using the SQL Membership provider to handle authentication. On one particular page the main function is the registration of an asset. You have to log in first. No problem. I also have required field validators on this registration form that work nicely. The problem is, if you log in, go to that page, then click the 'logout' button, it seems to submit the form (bypassing all my validation in the process)! I know I can't be the first person to come across this, so I'm guessing I've set something up wrong somewhere.

View 1 Replies

Web Forms :: Form Submits When Onchange Event Is Triggered In A Listbox?

Mar 9, 2011

My forst post here + I am new to Asp.Net as well. 2nd my apologies if this question has been asked before.

Here is my problem. I am given some really abstract pages, where I have to make a change. My change involves adding some links and on each link I have a function which is triggered when link is clicked on. This function validates some information in the form and then submits this form. This same form contains mulitple list boxes, all of them has AutoPostBack=true. The problem is when I select an item from listbox the form is submitted as I can print all the form properies on the page(all fields with their names and values) however, when I click on link and call the same forms submit(); method I dont see that happening. none of the form fields are printed out.

Now once I click on listbox and select an item after that as long as that item is selected, I can click on all links and they all call the submit() method of the form and it produces required resutls. I am really baffled as this doesnt seem correct as far as simple html is concerend.

View 3 Replies

MVC :: Dynamic Javascript In Ajax Partial View?

Sep 13, 2010

I have a partial view which uses Ajax.ActionLink to perform paging. The AjaxOptions in the link identify the update target (a div on the main view) and some javascript to run OnSuccess (in the partial view). The javascript must be in the partial view since there is some information in the partial view required to properly wire up the jQuery in the javascript. This isn't working as expected. The sample below is the minimum code to duplicate the behavior I am seeing:





Partial View:


I would expect that the value shown in the javascript alert would increase each time you click the link. I put in a break point and made sure the value was incrementing so it is definitely a problem in the ajax side. Is this by design? If so, what is the recommended work-around.

View 6 Replies

Copyrights 2005-15, All rights reserved