Security :: CreateUser Results In Login Failed?
Sep 23, 2010
I am using the Membership class in System.web.security to create a bunch of users. Here is the relavent code
[Code]....
After running the above code the out parameter status says success. I take the userId (email address) as well as the password generated by Membership.GeneratePassword to attempt to login to my app, I get Login failed. What am I doing wrong?Note: I can use the ASP.Net configuration tool to generate a user and that user successfully logs in. I checked the table Application in the database to see if the application these users I am attemtping to register in code were being registered to a different application than the one I an running but there is only one application in that table.
View 1 Replies
Similar Messages:
May 26, 2010
I need to create an application with Forms Authentication and/or Windows Authentication. If the application is set to use mixed authentication (Forms + Windows Auth) and the user don't have a Windows user account, the login will fail and he must be redirected to a forms login page. How can I do this?
Are there any different way to provide mixed authentication?
View 1 Replies
Jun 14, 2010
While i was using asp.net2.0 login control on IIS6.0 (WINDOWS SERVER2003) ON INTRANET FOR Login it shows login failed even it was working right on asp.net development server. i was using asp.net membership provider for this
View 2 Replies
Apr 6, 2010
I am runnign the SQL 2005 with Membership structure and two web-applications on the same server box. Each web application uses its own Application Name in aspnet_Applications table. There are two application names.
The users from web-app1 could not login to web-app2. Each web-apps uses different Application Pool. Each providers section of Membersip use correct applicationName from aspnet_Applications. The first application is working correct.
The problem is that sometimes the users could not login to web-application 2 during day. I get error Event code: 4006 Event message: Membership credential verification failed. The users start to login again after I Recycle - Stop - Start Application Pool of this web application.
View 1 Replies
Sep 26, 2010
I'm using this for connection to SQL Server 2005 [Windows authentication]
<add key="ConnectionString" value="Data Source=MALIKsqlexpress;Initial Catalog=gainpeace;Integrated Security=SSPI"></add>
but it generates an error
Cannot open database "gainpeace"
requested by the login. The login
failed. Login failed for user
'MALIKASPNET'.
View 1 Replies
May 16, 2010
I am using SQLEXPRESS 2008 R2 and developing ASP.net 4 application. I am getting this error:
Cannot open database "mydbfile" requested by the login. The login failed.
Login failed for user 'IIS APPPOOLASP.NET v4.0'.
View 6 Replies
Feb 5, 2011
I was wondering what the following error means: Login Failed. The Login Is From An Untrusted Domain And Cannot Be Used With Windows Authentication. Initially, when my application was much simpler, I had no permissions and roles and my authentication mode was set to "windows". Afterwards, however, I added authorization, changed the authentication mode to "Forms" and ever since, when I try to login, I get the error above.
View 5 Replies
Jul 1, 2010
I am experiencing this error on my website: login failed for user:DB_226227database_user
Below is the connection string:
<connectionStrings>
<add name="DBConnectionString" connectionString="Data Source=tcp:mssql03.discountasp.net;Initial Catalog=DB_226227database;User ID=DB_226227database_user;Password=******;"/>
</connectionStrings>[code].....
View 4 Replies
May 7, 2010
I'm trying to use ASP.NET MembershipProvider from an Ajax client (only html, css, js) (login.htm) by using a WCF service (AuthenticationService.svc). When running login.htm I get "Microsoft JScript runtime error: Sys.Net.WebServiceFailedException: The server method 'Login' failed with the following error: -- The server method 'Login' failed."I'm completely stuck what goes wrong here?login.htm
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
[code]...
View 4 Replies
Jul 31, 2010
I'm developing an ASP.net 3.5 Intranet Site for a client of mine on my development system. Recently, I copied the solution to my Client's Server across a VPN. I was able to access the home page, but that is all. WHen I attempt to open another page I get the following message. Login failed for user 'ADXXWEB1$'.where AD is the name of the Domain and XXWeb1 is the name of the server.Before a user can access any other page I check the user using a vb.net function. I grab the user from the following lineDim usr1 = HttpContext.Current.Userts Saturday night and my clients are off enjoying the weekend (lucky guys) but I would like to try and do more work. I assume I'm getting this message because the server doesn't recognize me because I'm on the VPN. Is there any way around this?
View 1 Replies
Feb 3, 2010
I have just turned on all membership infrastructure, maked an "Administrator" and successfully logined using standard LoginForm control.But when I uploaded my website on hosting server, I couldn't login anymore.I have MachineKey in web.config. Perhaps I need to set something on server (it is my VDS).
View 5 Replies
Feb 3, 2010
I am building an MVC application with C# as my language which is hosted on Widows 7 IIS. A call to Add a new member to the database works, but when attempting to save the change I get the following error:
Cannot open user default database. Login failed.
Login failed for user 'IIS APPPOOLmyApplication'
The SQL table was added just by adding it within VS.
View 1 Replies
Nov 29, 2010
I've narrowed the problem down to the following:
Receive "Login failed" for user ASPNET error message SQL Server 2005 is db and IIS is web server (both on same computer) Mixed authentication used on SQL Server I have created user ASPLogin with password that is correctly typed int the web.config:
add
name="masterConnectionString"
connectionString="Data
Source=computernameGMOSERVER;Initial Catalog=Portal;Persist Security Info=True;User ID=ASPLogin;Password=password" providerName="System.Data.SqlClient"
/>
I am able to access my webpages that query the database as long as they are not parameterized.However, the parameterized queries (e.g., SELECT * FROM SUPP_DASH_RESULTS WHERE organization_code = @orgcode) are the ones that do not work, and give me the "Login failed" error message
View 5 Replies
Aug 16, 2010
I'm running IIS 6.0 on a Windows 2003 server and running an ASP.NET 4 application which connects to an SQL Server 2005 database on another server. I have my Default.aspx page set to Windows authentication with anonymous access disabled.
When I load up the page it asks for a username and password (as expected), I enter my credentials and it comes up with the following error:Login failed for user ''. The user is not associated with a trusted SQL Server connection.
If I add the following to my web.config file: <identity impersonate="true"/> then I get the following error:
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.
And if I add the <identity impersonate> tag set to true and with my username and password included it connects successfully.
I can't leave this in there as I want each user to connect as themselves, so why is the server not using the credentials that I enter when prompted to connect to the database ?
View 5 Replies
Aug 26, 2010
Cannot open user default database. Login failed. Login failed for user X
View 3 Replies
Feb 28, 2011
I'm trying to use the Membership.CreateUser method without passing a security question and answer. I set them to string.empty, but no go. I have my provider set to not require a question in my web.config. What am I doing wrong?
[Code]....
View 2 Replies
Feb 7, 2011
Is there possibility to create new user with Membership.CreateUser but not to specify the user's password?
I tried with minRequiredPasswordLength="0" minRequiredNonalphanumericCharacters="0", but it didn't work.
I also tried with "" and DBNull.Value for password in the function but it didn't work.
Is there a way to do this?
View 8 Replies
Aug 10, 2010
I'm working with 2 sites (Intranet and Extranet) that share the same .net membership database (the standard out of the box version). The Intranet and Extranet site users are stored in separate "Applications" within the membership database. I create all users for both sites from within the intranet site. Everything seems to be working except that when i create a user for the extranet site I end up with 2 rows for that user in aspnet_users. One with userID (guid) that I send in and another with a different guid. I'm assusming that .net is creating an anonymous user. The intranet membership provider is the default.
I could delete this row through sql but am hoping for a more elegant solution. Any suggestions?
Dim objUser As MembershipUser
View 6 Replies
Apr 21, 2010
I need to modify the CreateUser function because I want to pass an additional parameter to the function. I think the neatest way would be to edit the current IMembershipService interface so that the CreateUser contract includes my additional parameter in all calls to CreateUser.Is this the suggested approach when needing to modify the parameters of the 3 functions?
View 2 Replies
Aug 11, 2010
I have a CreateUserWizard control to be able to allow an anonymous user to create an account. Provided that all entered information is correct that the user enters, a new account is created for him/her. But also, when this user is created, I want to [b]also[/b] add the username to another table in my ASPNETDB database. How exactly can I "tap" into the event that creates a user and adds it to the appropriate tables (aspnet_Users, Members, etc.) and make it add the username to yet another table?
View 1 Replies
Feb 10, 2011
I created online store following MvcMusicStore tutorial in MVC 2. Used standard login view as shown in tutorial. I created database on new server and it's working well - I can search for albums etc. The problem is when I am trying to register new user - I am getting error listed below (can't log in too). I created new database using aspnet_regsql.exe. Server authentication is set to SQL Server and Windows authentication mode. Server Error in '/' Application. Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. Source Error:
[Code]....
Line 125:Line 126: MembershipCreateStatus status;Line 127: _provider.CreateUser(userName, password, email, null, null, true, null, out status);Line 128: return status;Line 129: }
[Code]....
View 3 Replies
Jul 26, 2010
How can i customize or change createuserwizard in visual studio to suite my purpose, for example i want to additional function apart from username , i want to include lastname , country name etc which are not available in createuser wizard, i have done
it in the database table but it is not working.
View 2 Replies
Aug 12, 2010
I have a problem with my membership management. I moved the aspnet membership database to my MSSQL server and I would like to create an add user form not using the CreateUserWizard (I would like to add more information then in the simple CUW). I've created the form and I would like to use the Membership.CreateUser method to add the user. After running the script (VB) the user is available in the aspnet_Users table, also in the aspnet_UserInRoles table but not in the aspnet_Membership table. I'm sure that something is wrong with the configuration, I just can't find what.
[Code]....
View 5 Replies
Jul 5, 2010
I am attempting to create a user programatically with Email as the username. My code calls one of the CreateUser overloads, passing only Username, Password and Email. It consistently fails with a status of MembershipCreateStatus.InvalidAnswer. How can this be? I'm not even passing it a security question or answer.
[Code]....
View 2 Replies
Aug 30, 2012
I have login page, users enter their username and password ... I want when users enter their password wrong after 3 time they can't enter password until 24 hours after that they can try it again, How i can do it?
View 1 Replies