I am developing a intranet for our company and right now have a problem on loading my report. I developed my report with Visual Studio 2005 and try to load it with Visual Web Developer. I downloaded ReportViewer as well. My database connection is Windows Authentication also. Here is my code in Visual Web Developer:
Imports Microsoft.Reporting.WebForms Imports System.Net Imports System.Security.Principal Partial Public Class ShowReport Inherits System.Web.UI.Page Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init ReportViewer1.ServerReport.ReportServerCredentials = New MyReportServerCredentials() End Sub
Private Sub form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles form1.Load Dim strReportURL As Uri strReportURL = New Uri("http://SERVERNAME/reportserver")...........................
After opening an existing proyect in visual studio 2010, the web form in design view doens't work. All server control puts a gray box with the following message : Error Creating Control - imgTransportistaSession state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration><system.web><httpModules> section in the application configuration.
I'm using Visual Studio 2008, and when I select/highlight something in design view and switch to source view it does not highlight and scroll to the selected item. This makes it really hard to change stuff in source view, and it's very inconvenient at worst
I've always just used incremental search, but have recently starting using a class browser plugin for vim and would like something of the same in Visual Studio to navigate methods, properties, etc. in a browser type window. Seems like this is what Class View is for, but when I'm on a page's code behind, it doesn't show up on the class view window.
When I search for the class, it shows up but when I click on it I get "The definition of the object is hidden.". Is there some basic setup thing I'm doing wrong or does VS not support class view for page classes? Is there an extension that does this (I'm using VS2010)?
I have a solution CPortal created in Visual Studio 2010. It has two Projects (CPporal and Login). If I right click the Login project folder and select 'View in Browser' It opens in IE as http://localhost:4558/Login/. If I rightclick the CPortal folder and select 'View in Browser it opens as http://localhost:1807/CPortal/. Please note the change in port number.
I am facing problem because, after I get myself authorized on the Login, it is is supposed to redirect me to CPortal, which it does, but uses the same port number that Login opened with. i.e. It redirects me to http://localhost:4558/CPortal/ and gives 404 file not found error. How do I make Visual Studio 2010 to use the same port number for both (all) projects so that this problem does not occur.
i have created a web project and i want to test it.when i click on debug or click on default page to view on browser , ASP.NET Web Development Server Works but nothing appear in my web browser . even i used internal browser ofVisual Studio 2008 but it shows this message :
While I am running a webpage by doing a right click on it and selecting 'View in Browser' in Visual Studio 2008; it popping up the following error:-
The requested URL could not be retrieved While trying to retrieve the URL: /TestADO2/Default.aspx
The following error was encountered:
Invalid URL Some aspect of the requested URL is incorrect. Possible problems:
Missing or incorrect access protocol (should be `http://'' or similar) Missing hostname Illegal double-escape in the URL-Path Illegal character in hostname; underscores are not allowed Your cache administrator is webmaster.
Generated Tue, 17 Aug 2010 06:23:46 GMT by linux.site (squid/2.5.STABLE5)
1. My system is connected to a LAN which is accessing the internet through a webserver.
2. When we first time open a web browser it asks us to login to access the internet.
I am getting below error when trying to view aspx file in web browser. Server Error in '/Cricket Website' Application. Error finding Application Setting - Error running Procedure - Exception of type 'System.Exception' was thrown.
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Error finding Application Setting - Error running Procedure - Exception of type 'System.Exception' was thrown.
Line 162:Line 163: Catch ex As ExceptionLine 164: Throw New Exception("Error finding Application Setting - " & ex.Message)Line 165: End TryLine 166: End Function
I just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
I want to use a source control in VS2010, I know my best bet is TFS, but at the moment TFS(can't afford ). As i understand TFS is the new VSS_2005(can afford)Can VSS 2005 be use as a source control for VS 2010 solutions/projects?
I am building master page in visual studio 2005 and I have placed contentplaceholder into between <head> and </head> tag of master page, but in source view of visual studio 2005, I am getting error that says "unrecognized tag prefix or device filter" how do i get rid of this error or is this bug in visual studio 2005
I have upgraded to VS2010 recently. Now VS2010 is not opening i get an messg box displaying. Microsoft Visual Studio has encountered a problem and needs to close. We are sorry for the inconvenience. It automatically gets restarted and displays the same message. I have re-installed VS more than 3 times.
I run the start debugging option...it runs successfully. but still is shows start debugging option is shown in the Visual studio 2005 IDE. And one more problem is ::I applied break points in one page and run the application. but those break points are not detected....
I know both these software are old and that I can update to newer version. But I need to do it with those software in particular.I have Visual Studio 2005 and Visual SourceSafe 6 installed on my computer. When I try to open Visual SourceSafe 6 database using Visual SourceSafe 6 directly, I have no problem at all.Then I try to open a project solution I took from SourceSafe using Visual Studio 2005. Right away I receive this messageThe solution appears to be under source control, but its binding information cannot be found. It is possible that the MSSCCPRJ.SCC file or another item that holds the source control settings for the solution, has been deleted. Because it is not possible to recover this missing information automatically, the projects whose bindings are missing will be treated as not under source control.
Then an invite to chose a SourceSafe Database open. I click on BROWSE. First thing I noticed : The SourceSafe available databases list is empty (while I remind, it's not in SourceSafe 6. I can see there the COMMON database and the VSS database which is located on a different server on our network. Before that, I went in TOOLS->OPTIONS->SOURCE CONTROL, and make sure Visual Source Safe was selected as the Plug-in to use for a Source Control).So I click again on Browse, and locate my srcsafe.ini file. Everything is OK. It evens confirm me that my database path is \dev2k3programmationVSS and that my database name is indeed VSS. So it found it. I then click on OK.
But when I do, the Database is not added to my available list, at all. The result, I can never select a source control, ever, which end in me not being able to work connected to the main source control of our network. Everything is working fine on every other computer in our company. Only this one have problem.Did I give enough description to my problem? I really need help on this one, because working disconnected from Source Safe can give a lot of pain to our team. Can anyone give me an hand? If you need any more info, just ask.
I have installed visual studio 2008 in my system.But my website is in Framework 2.0 and have a reports in it. i have opened my website in visual studio 2008 with the Framework built in 2.0. but many times when i debug it will give a version conflict error for reports as mentioned below.
"The type 'Microsoft.Reporting.WebForms.ReportViewer' exists in both 'c:WINDOWSassemblyGAC_MSILMicrosoft.ReportViewer.WebForms126.96.36.199__b03f5f7f11d50a3aMicrosoft.ReportViewer.WebForms.dll' and 'c:WINDOWSassemblyGAC_MSILMicrosoft.ReportViewer.WebForms188.8.131.52__b03f5f7f11d50a3aMicrosoft.ReportViewer.WebForms.dll"
When I open up a web application project, VS attemps to configure IIS to open the project. This is fine, but typically there is already an application in that place. For example, we have apps that run at the root, and various feature branches would map to the same virtual application. Even though VS can *create* the application, it won't modify an existing one.
For example, lets say IIS has: /MyApp During my day I mightwant to work on MyApp from: c:ranchesfeature1MyApp c:ranchesfeature2MyApp c:archive elease102MyApp c:production elease204MyApp
If I delete /MyApp, then VS will create it when I open any of these projects, but it will never modify /MyApp to point to my current project. So first thing is: Is there any way to change this behavior?
Second question is, is there no way to open a web application project w/o having a properly backed IIS application setup? I know you can have the projects run off the casini webserver, but all of our applications target IIS and rely on inherited web.config settings. /MyApp is expecting to find config values that exist at /Web.Config and a login page for the entire system at /Login.aspx. Trying to run /MyApp in casini fails immediately because of these dependencies.
But what if I am just doing a code review. I don't care to browse the site, I just want to open the project. Is there no way to tell VS to just open the project and ignore the fact that IIS isn't setup right?
I have a project in VS2008.Net3.5 with a Module1, form1 and form2.
Imports Microsoft.VisualBasic Module Module1 Public frm1 As form1 Public frm2 As form2 Sub Main() frm1 = New form1 frm2 = New form2 Application.run(frm1) End Sub 'A menu sub Private Sub menuGotoSpecification_Click(ByVal sender As Object, ByVal e As System.EventArgs) _ Handles menuGotoSpecification.Click frm2.Show() End Sub End Module Public Class form1 Private Overrides Sub Show() LoadData() MyBase.Show() End Sub End Class Public Class form2 Private Overrides Sub Show() LoadData() MyBase.Show() End Sub Private Sub btnDone_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDone.Click frm1.show() frm1.refresh() Me.Hide() End Sub End Class[/CODE]
At the beginning I am opening form1 from sub Main(). Now from the menu I am openning form2. In form2 I am clicking Done button to hide form2 and go back to form1. It works fine in the 1st trial. Keeping form1 open for the 2nd time, I opened form2 from the menu. Now when I Click the Done button 2nd time it just hides up everything. Form1 does not show UP. It just exits the whole application. But in my btnDone event, I have frm1.show().