Visual Studio :: Start Debugging Option Is Shown In The Visual Studio 2005 IDE?
Feb 9, 2011
I run the start debugging option...it runs successfully. but still is shows start debugging option is shown in the Visual studio 2005 IDE. And one more problem is ::I applied break points in one page and run the application. but those break points are not detected....
I used to have nice development environment at XP for .Net web application development. I have now installed Windows 7 and going to take it as my new machine. I already installed VS2005 and I'm able to build a project. IIS is working fine and I'm able to open the web application in the web browser. Windows firewall is Off.When I click Start Debuggin on Visual Studio 2005 on Windows 7 I get following error:Unable to start debugging on the web server. Unable to connect to the web server. Verify that the web server is running and that incoming HTTP requests are not blocked by a firewall. What could be wrong? Something to configure in the IIS?
I just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
I get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
I'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
I have used Visual Web Developer (versions up to 2010) with no problems for several years. Starting last week I am no longer able to run or debug any ASP.Net application locally. I am running Windows XP, IIS 5.1, IE8, Visual Web Developer 2005, targetting .Net 2.0. I am not able to Start Debugging or Start Without Debugging for any project. When I attempt to Start Debugging, IE browses to [URL] instead of to the project I am attempting to run. When I Start Without Debugging, IE opens to about:blank and then when I close that window another IE window opens to [URL]
Maybe irrelevant, but I had the same problem with IE7 and VWD 2010 (versus IE8, VWD 2005). IIS is set to .Net version 2.0. I have the same problem whether I add a virtual directory to my project in IIS or not.
I have a solution I have been working on over the last few weeks with a 3 or 4 projects in that used to build and begin debugging in under 10 seconds.The solution contains 3 dll's and 1 mvc project.
As of today, it takes about 2 minutes to start debugging, it keeps pausing on "loading symbols for ccpCodeProvider.dll".
I'm debugging on the internal vs development server, and I haven't changed anything since yesterday?I haven't ever used symbols before, and I'm not trying to debug the framework or anything, I just want my stupid web project to run.I created a new solution from scratch and added a random console app, and that also takes forever to debug.
I am getting an error "Unable to start debugging on the web server..." while running as web application in VS2005. But the error seems only for this application. I created a test application, both in VS2005 and VS2008, and found no issues in running these applications.
Im working on a website project with Visual Studio 2010 from 2 different computers (home & work). In Dreamweaver Im used to FTP to upload/download files to/from a webserver to syncronice my files on the current computer Im working on.What is best option in Visual Studio 2010 to sync project files between home & work computers? I have seen there is a built in FTP, but seems only it can upload files, limited functionality?
Unable to start debugging on the web server. The IIS worker process for the launched URL is not currently running.I'm running Windows 7 64 bit, VS 2008 sp1.When I first try to debug I get the error msg above. I wait a few minutes (presumably some service is starting) and debugging will start but no breakpoints are recognized.Some of the things I've tried:Changing the binding of my site from a static IP to "*".
Enabled windows authentication.made sure localhost = 127.0.0.1 in the hosts file.The website was built under windows xp and whatever version of IIS ships with xp. My web config has no errors that I know of but might be missing something required for iis 7 (??)
I have been using visual studio 2005 Prof. Edition to debug stored procedure using this tool. However I cannot use the comment field as it is grayed out.
Is it possible to comment code in transact sql using visual studio 2005.
I want to use a source control in VS2010, I know my best bet is TFS, but at the moment TFS(can't afford ). As i understand TFS is the new VSS_2005(can afford)Can VSS 2005 be use as a source control for VS 2010 solutions/projects?
I am building master page in visual studio 2005 and I have placed contentplaceholder into between <head> and </head> tag of master page, but in source view of visual studio 2005, I am getting error that says "unrecognized tag prefix or device filter" how do i get rid of this error or is this bug in visual studio 2005
I have upgraded a Visual Studio 2005 Web Site in a 32 bit server to Visual Studio 2008 maintaining the same 2.0 framework in a 64 bit server with Windows 2008 R2 Server. The Web Site has several class libraries.
After porting to Visual Studio 2008 2.0 Framework using the Upgrade Wizard, I found that I was unable to hit a break point in the Project code behind files while I was able to in the class libraries. The bin folder has the dlls and the corresponding pdb files for the class libraries. I did start the Web site as an Administrator and made sure whole bunch of IIS7 properties are properly set.
I tried to rebuild the solution as a Web Application in Visual Studio 2008 and gave up that approach as I faced hundreds of error messages pointing to missing references and namespaces inspite of adding whole lot of references and namespaces to the Web.
I have VS.NET 2003, 2005 and 2008, when I use VS.NET 2005 and clic on new project, this doesn't show me the business intelligence option, this only work with .NET 2008, what sould i do?
I know both these software are old and that I can update to newer version. But I need to do it with those software in particular.I have Visual Studio 2005 and Visual SourceSafe 6 installed on my computer. When I try to open Visual SourceSafe 6 database using Visual SourceSafe 6 directly, I have no problem at all.Then I try to open a project solution I took from SourceSafe using Visual Studio 2005. Right away I receive this messageThe solution appears to be under source control, but its binding information cannot be found. It is possible that the MSSCCPRJ.SCC file or another item that holds the source control settings for the solution, has been deleted. Because it is not possible to recover this missing information automatically, the projects whose bindings are missing will be treated as not under source control.
Then an invite to chose a SourceSafe Database open. I click on BROWSE. First thing I noticed : The SourceSafe available databases list is empty (while I remind, it's not in SourceSafe 6. I can see there the COMMON database and the VSS database which is located on a different server on our network. Before that, I went in TOOLS->OPTIONS->SOURCE CONTROL, and make sure Visual Source Safe was selected as the Plug-in to use for a Source Control).So I click again on Browse, and locate my srcsafe.ini file. Everything is OK. It evens confirm me that my database path is \dev2k3programmationVSS and that my database name is indeed VSS. So it found it. I then click on OK.
But when I do, the Database is not added to my available list, at all. The result, I can never select a source control, ever, which end in me not being able to work connected to the main source control of our network. Everything is working fine on every other computer in our company. Only this one have problem.Did I give enough description to my problem? I really need help on this one, because working disconnected from Source Safe can give a lot of pain to our team. Can anyone give me an hand? If you need any more info, just ask.
Debug-Start Debugging/Debug-StartWithoutDebugging OR Project ASP.Net Configuration launches Dreamweaver. It started lastnight, I had both Deamweaver and VWD 2008 express open at the same time - (I was looking at JQuery in the Microsoft and Dreamweaver enviroments simultaniously). After the first tie this happened, I closed down Dreamweaver (CS3) and it opened when I tried to run my VWD project. I reinstalled VWD 2008 express, IIS and disabled Dreamweaver (renamed the exe). Dreamweaver still came up.
I got a project when after opening in visual studio 2005 in build mode drop down, only debug mode is shown but release mode not shown.Project builds successfully in debug mode is there a way to enable release mode.
I am getting this error, without any further details, when attempting to debug my ASP.Net project in VS2010. There are other developers using the same tools and code who are not having this problem therefore I know the problem is not in the web.config file. I have found several suggestions when googling the issue and tried them all to no avail. I uninstalled and re-installed VS2010 along with the .Net 4 framework. I made sure Anonymous as well as Windows authentication is enabled in IIS. I uninstalled and reinstalled IIS. I am at a loss. I can attach to the process and debug the ASP.Net code that way, but what I really need to be working on is a Silverlight app that is called from the ASP.Net and the breakpoints don't work in Silverlight when I attach to the process manually.
I have installed visual studio 2008 in my system.But my website is in Framework 2.0 and have a reports in it. i have opened my website in visual studio 2008 with the Framework built in 2.0. but many times when i debug it will give a version conflict error for reports as mentioned below.
"The type 'Microsoft.Reporting.WebForms.ReportViewer' exists in both 'c:WINDOWSassemblyGAC_MSILMicrosoft.ReportViewer.WebForms9.0.0.0__b03f5f7f11d50a3aMicrosoft.ReportViewer.WebForms.dll' and 'c:WINDOWSassemblyGAC_MSILMicrosoft.ReportViewer.WebForms8.0.0.0__b03f5f7f11d50a3aMicrosoft.ReportViewer.WebForms.dll"