I have login page, users enter their username and password ... I want when users enter their password wrong after 3 time they can't enter password until 24 hours after that they can try it again, How i can do it?
View 1 Replies
Can I have some codes in login attempts. For example, the user tried to login for three consecutive times and then he failed. The session he gets will be locked for about 30 seconds.
View 1 RepliesI'm using this for connection to SQL Server 2005 [Windows authentication]
<add key="ConnectionString" value="Data Source=MALIKsqlexpress;Initial Catalog=gainpeace;Integrated Security=SSPI"></add>
but it generates an error
Cannot open database "gainpeace"
requested by the login. The login
failed. Login failed for user
'MALIKASPNET'.
Cannot open user default database. Login failed. Login failed for user X
View 3 RepliesI am using SQLEXPRESS 2008 R2 and developing ASP.net 4 application. I am getting this error:
Cannot open database "mydbfile" requested by the login. The login failed.
Login failed for user 'IIS APPPOOLASP.NET v4.0'.
I need to add features in login page.
1) Only allow user in three times attemps
2) After three times failed to login, the user will be restricted for 30 minutes.
I knew how to code for 1) but I do not how to do 2).
I have developed an application in ASP.NET 3.5 which utilizes the Membership and Roles Providers and Forms Authentication to manage user access and profiles.
There are various area's of this application that are only to be used by an admin users whom login using their email and password and the rest of the users log in using their telephone number and password via their iPhone.
For simplicities sake, I would like to have two different login pages, one that is formatted for the iPhone and performs the correct validation for users adding a telephone number and the other for the application administrators.
I want to redirect the user to their respective login page based on which folder they are attempting to access. For example say I have an application structure like this
/Admin
/Couriers
/Customers
/Whatever
Default.aspx
iPhoneLogin.aspx
adminLogin.aspx
Web.config
I want to be able to redirect users who go to [URL]/Whatever to iPhoneLogin.aspx and users to go to [URL]/Admin to adminLogin.aspx
I need to create an application with Forms Authentication and/or Windows Authentication. If the application is set to use mixed authentication (Forms + Windows Auth) and the user don't have a Windows user account, the login will fail and he must be redirected to a forms login page. How can I do this?
Are there any different way to provide mixed authentication?
I am creating a new application..I created a login page successfully..Now I need to modify the login page ..Only 3 attempts only allowed for a user ..If the user wrongly enters the password more than 3 times(within 5 min) his account must be blocked..And error message must be shown as You cant access your page.
View 4 RepliesWhile i was using asp.net2.0 login control on IIS6.0 (WINDOWS SERVER2003) ON INTRANET FOR Login it shows login failed even it was working right on asp.net development server. i was using asp.net membership provider for this
View 2 Replies...i am developing web Site in asp.Net.
When i Run Web Site using Visual studio i dont get the error.it works fine ...But When i run WebSite by publishing on IIS .i am getting the following error.
ERROR:
Login failed for user 'TEGASYSINDTEGADEV3$'.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
I am experiencing this error on my website: login failed for user:DB_226227database_user
Below is the connection string:
<connectionStrings>
<add name="DBConnectionString" connectionString="Data Source=tcp:mssql03.discountasp.net;Initial Catalog=DB_226227database;User ID=DB_226227database_user;Password=******;"/>
</connectionStrings>[code].....
I use a dbml for my Data Access Layer to provide the data that i need in my app. When i connect from the server explorer everything seems fine. I choose to use my windows authentication and the connection test shows everything works just fine. When i Build my solution and run it on my IIS it says that i'm using a login that is not working.
View 3 RepliesIn my application (chapter 12 from Professional.ASP.NET.2.0.Databases wrox press) when I run the page (view in browser) I receive this error .
Login failed for user 'sa'.
Line 95: catch (Exception ex)
Line 96: {
Line 97: throw ex;
Line 98: }
Line 99: }
Source File: c:Websitessearch carApp_CodeUserDB.cs Line: 97
Microsoft sql server error 18456 in sql server 2008 r2login failed for user sasql server was working properlyi just restarted the system and then i started getting the above errorhow do i resolve iti am able to login with windows authentication but not sql authentication....
View 1 RepliesI'm using Visual Web Dev 2008 Express and created a website. The database is an sql server 2008 db and I have added the ASPNET user login I also have the aspnet db object inmy db. When I run my app I can login using the login page, however when I try to retreive data from the database I get the following:
I tried going to Security | Logins | and seting the NT AUTHORITYNETWORK SERVICE to DB owner, but no luck.
What am I doing wrong here?
Cannot open database "TEST" requested by the login. The login failed.
Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
Im getting the following error when I try to login to web page with a valid username and password:
Oops. The error: Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.
This is my web.config :
<configuration>
<system.web>
<customErrors mode="Off"/>
<authentication mode="Forms">
<forms name=".ASPXFORUM" loginUrl="login.aspx" protection="All"
timeout="30" path="/" />
</authentication>
<authorization>
<deny users="?" />
</authorization>
</system.web>
</configuration>
Anyone know what this error mean?
I just added my website to IIS. After much troubleshooting I was able to make it run with the Classic .NET App Pool.
But on the page which requires connecting with the database, I am getting the error "Login failed for the user 'IIS APPPOOLClass .NET AppPool'
Here's the screenshot of the error: [URL]
I'm carrying out a lot of db updates in succession - bulk inserts, bulk updates, deletetions, and other smaller read/write operations. There can be as many as 80 calls to stored procedures in succession, with a few SqlBulkCopy operations thrown in. It isn't possible to reduce the number of operations further. I'm testing on localhost at the moment.
Intermittently, I'm seeing the error:
"Cannot open database "database_name" requested by the login. The login failed. Login failed for user 'SERVERLogin Name'"
It is not a permissions issue, as the same user is used throughout all operations and the error occurs at different stages each time the routine is run. I'm closing (not disposing) the db connection after each procedure. I've set the CommandTimeout to a more than sufficient period.
Should have mentioned: I'm calling these SPs from a Windows Forms app...
I get the above error when trying to run my .net app as it attempts to connect to a SQL database on another server.
The SQL connection string is using a trusted connection.
IIS has anonymous access switched off, and integrated windows authentication switched on.
The user the error relates to is "DOMAINNAMEIISSERVERNAME$"
Do I need to add user "DOMAINNAMEIISSERVERNAME$" as a login on the SQL server machine?
I expected my username to be passed around - i.e. if I have access to the SQL server then the application would run fine?
EDIT: Should point out that I know it's authenticating OK from an IIS point of view... if I switch to anonymous access it fails my own security as an "Unknown User"... which is what I'm after
I'm developing an ASP.net 3.5 Intranet Site for a client of mine on my development system. Recently, I copied the solution to my Client's Server across a VPN. I was able to access the home page, but that is all. WHen I attempt to open another page I get the following message. Login failed for user 'ADXXWEB1$'.where AD is the name of the Domain and XXWeb1 is the name of the server.Before a user can access any other page I check the user using a vb.net function. I grab the user from the following lineDim usr1 = HttpContext.Current.Userts Saturday night and my clients are off enjoying the weekend (lucky guys) but I would like to try and do more work. I assume I'm getting this message because the server doesn't recognize me because I'm on the VPN. Is there any way around this?
View 1 RepliesLanguage-Asp.net(c#) 2008 Sql Server 2005 well i designed a simple login form which checks the user and password with sql server but now i want to make it a little bit more secured basically i want if a user attempts wrong password with more then 3 /5 times. his id or username should be locked(which i will be running a update procedure) or he must be redirect to denied.htm and one more thing he should be able to get only n only 3/5 attempts whether he opens firefox browser,internet explorer ,safari,google chrome or any other browser
View 6 RepliesThe simplest example is when you try to log to this site. So basically i would like to do the same thing.
But since i'm now to this area... So any thoughts? Do i capture the session?The viewstate,The ip?Is there a standard way on web.config and - or on the login button that i'm missing?
well i designed a simple login form which checks the user and password with sql server
but now i want to make it a little bit more secured
basically i want if a user attempts wrong password with more then 3 /5 times.
his id or username should be locked(which i will be running a update procedure) or he must be redirect to denied.htm
and one more thing he should be able to get only n only 3/5 attempts whether he opens firefox browser, internet explorer ,safari,google chrome or any other browser
I'm creating a login page. I want to limit the number of login attempts, say not more than 5, in case of wrong.I want to do it without using the asp:loghin controls and the membership.How can restrict it??
View 3 Replies
