Web Forms :: Disable Elements In The Markup?

Dec 13, 2010

I want to disable certain elements in the markup in the aspx file, e.g. I don't want to have the markup pagination if there are no items to display, etc.

I'm aware that you can disable html elements using javascript, but I'd rather not do it this way since I can't guarantee that everybody who looks at my site will have a browser with javascript enabled.

The way I'd been doing it is to create a literal control, and in the codebehind file on page load, I'd set the text to either the empty string or the actual html markup that I wanted.

However, this has problems in that I need to recompile and rerun the website everytime I want to change the markup, rather than just make my changes in the aspx file and refresh the page.

I know that some controls, such as repeaters, etc, have templates which can be set by loading in the code from another aspx/ascx file, but I don't know if this is possible with literal controls.

I'm quite new to web development, but I figure this is something that must come up quite a lot so I didn't know if there was a standard way which is agreed to be the best way to do this kind of thing.

View 13 Replies

Similar Messages:

How The Server Process The Page - Code Behind - "markup Mixed With HTML Elements"

Oct 23, 2010

I want to know how the server will process my page that contain:

1- ASP.NET markup mixed with HTML elements.
2- Code behinde.

Will it read the ASP.NET markup line by line and even HTML elements? And then reads the code behind? or what exactly?

View 1 Replies

JavHow To Disable Or Remove Unnecessary Form Elements Before An ASP.NET Asynchronous

Oct 21, 2010

I'm building a shopping cart page that could potentially contain dozens of separate items. Each item has a collapsible panel that contains several form elements that can be used to customize it. Most of the cart is wrapped in an UpdatePanel so that I can avoid a full postback when the user makes changes. When there are many items in the cart, there are of course many many postback elements, all of which are included in the raw form post, even though each post is really only triggered by the change of a single element

View 1 Replies

Load Dynamic List Of Elements AFTER FINISHED Loading Of Several Form Elements?

Mar 1, 2010

I have...a dynamic populated select box several input boxes a submit button form fields are loaded initially using cookies several dynamic populated divs

I want... start loading the content of my DIVs after all FORM elements have been loaded completely (= filled with data, select boxes are populated)

Sample code:


View 1 Replies

JQuery :: Access Html Elements Like "<p>" Tag And Others When Html Elements Are In Content Page Only?

Oct 3, 2010

i have found out a way to find controls on content pages by using

var txt = $('input[id$=TextBox1]'). But how to access html elements like "<p>" tag and others in jquery when the html elements are in content page only.

View 5 Replies

Web Forms :: RouteUrl In Markup With Changes Values?

Jun 23, 2010

I would like to build hyperlinks into my website who implement the routing techniques from ASP.NET 4.0. but ik can't seem to find a way to use the RouteUrl with changing values


In the code above (part of a GridView) i would like to bind to the routename "CustomerRoute" en provide the parameter "CustomerID" which gets its value from the field "CustomerID". But his doesn't seem to work.

View 1 Replies

Web Forms :: Put Custom Markup On Images?

Jan 13, 2010

I am having a purpose to display an image (like floor plan) and map its area dynamically for a web application in ASP.NET.

View 1 Replies

Web Forms :: Dynamically Modify HTML Markup

Sep 22, 2010

I have a Master Page as well as a standard Web Form aspx file. What if I wanted to dynamically modify the complete HTML markup in an aspx file (perhaps based on a conditional statement - perhaps in a specific content place holder), how would I go about doing this? Sorry I'm coming from a PHP background so this is why I'm asking such a simple question.

View 1 Replies

Web Forms :: Custom Format String In Markup?

May 18, 2010

Is it possible to use a custom format string in the markup? In the codebehind page the string looks like this:

MyBoundField.DataFormatString = "{0:n" + MyEnvironment.CurrentCulture.NumberFormat.CurrencyDecimalDigits + "}";

i.e i want to do something like the below example (but that does not work)

DataFormatString="{0:n'<%# SummarumEnvironment.CurrentCulture.NumberFormat.CurrencyDecimalDigits.ToString())

View 1 Replies

Web Forms :: Favicon In Master Page Markup Not Working

Mar 22, 2011

I have added a favicon to my site but it will not appear. I have the following two lines in the master page markup:


When the first page that uses the master page is rendered in the browser, these links are:


This is as I would expect yet the favicon does not appear. It appears fine on any basic html pages but simply won't on any pages that are based on the master page.

View 2 Replies

E-mailing Forms: Adding HTML Markup To Code-behind?

Apr 13, 2010

I'm trying to add some basic HTML markup to my code-behind, just a H1 and a few breaks separating strings in the message.Body, but can't seem to get it going without errors.


Probably a straightforward thing, or not intended usage at all,

View 4 Replies

Web Forms :: Invalid XHTML Markup Using ItemCommand In ImageButton?

May 20, 2010

I'm using an ImageButton inside a repeater with an ItemCommand. The repeater is used as a trigger to an UpdatePanel. The XHTML generated puts an 'ItemCommand' attribute in the <input> element corresponding to the ImageButton. This causes XHTML validation (using the W3C validator) to fail, because ItemCommand isn't a valid attribute for input.

I've Googled and found nothing about this, and the MSDN page assures me that asp.net generates perfect XHTML.

View 2 Replies

Forms Data Controls :: Concatenation Of Two Strings In Markup Portion?

Feb 19, 2010

How can I concatenate two string in Markup Portion. See the following:

<asp:Image ID="Image1" runat="server"
ImageUrl='<%#Bind("PictureURL") %>' Width="80px" />

I want to add an pre URL before the binding. How can I accomplish this?

View 1 Replies

Forms Data Controls :: Use Session Variable In Markup Aspx Page?

Sep 8, 2010

Is it possible to use a session variable in the markup aspx page ?

Cause I have a gridview that use an sqldatasource and in the UpdateCommand I want to include a the session variable : session("username").

Ex :

UpdateCommand="UPDATE departments SET DEP_name = @DEP_name, DEP_active = @DEP_active, DEP_date_stamp = CONVERT (CHAR(8), GETDATE(), 112) + ' ' + CONVERT (VARCHAR(8), GETDATE(), 108),
DEP_user_stamp = <% session("username") %> WHERE (DEP_mnc = @original_DEP_mnc)">

This give me an error :

Server tags cannot contain <% .... %> constructs.

View 5 Replies

Javascript Disable Checkbox Not Working After Codebehind Disable?

Aug 25, 2010

I have a simple javascipt which enables/disables some checkboxes when another checkbox ticked/unticked. This works fine, however, in some instances when by page is loaded my code behind disables the same check boxes. When this happenes my original check box nolonger seems to have any influence in enableing or disabling - there is no error and all the elements seem to be found by the javascript - it just doesn't enable/disable the checkboxes.

View 5 Replies

Forms Data Controls :: Change Height,width,color In Boundfield Of Gridview On Markup?

Mar 11, 2010

I was hoping this is simple but i have problems.

Basically i was only able to set the string color with itemstyle-Forecolor.

But how do i set the background of a column and also set height,width.Ok height may not work because i have an itemtemplate with predefined height.

Can this be done in a simple boundfield or must i have all my datafields in itemtemplates?

What i do for one column:


View 18 Replies

Web Forms :: Create Dynamic Elements Within Div

Feb 28, 2010

i'm trying to create a mini-forum (like facebook or twitter ...), so the user logs in and enters a message, that gets stored on sql server and im now trying to display it in the page, by looping through all the relevent records the code that is corrects is:


so here i created a container, now i need to add other content within that div i tryed the samething


but of course that did not work,does anyone know of this (elements within element) can be achieved.

View 4 Replies

Web Forms :: Elements Changes ID When Webpage Running

Oct 24, 2010

I am studying for the 70-562 exam with the microsoft book. The author wrote that the ID that you set in your designer will be your client ID, and also uses some examples like this found in the WebService chapter:

<asp:TextBox ID="TextBoxTemp" runat="server" />
<asp:Label ID="LabelResults" runat="server" Text="" />
<br />
<input id="Button1" type="button" value="Calculate" onclick="GetCelsius()" />

And the JS:

function GetCelsius() {
var val = document.getElementById("TextBoxTemp");
TempConversion.GetCelsius(val.value, FinishCallback);

The point is: the ID changes, so the val is always null. Is the book wrong or am I doing something wrong?

View 2 Replies

Web Forms :: Reference A Elements Of One Control From Other?

Sep 16, 2010

how user controls can communicate with each other within an asp.net application. I am facing many obstacles at the moment regarding this problem. For example, is it possible to set the visible property of a panel on one user control based on what happens in another?

Another example would be: Can I set the text of a label in one control to be the value of some other property from another control's class like.... Me.PreContentColumn.ColumnID = LocalProduct.PreContentColumnId.

View 3 Replies

AJAX :: Disable Whole Tabcontainer (disable Click)

May 11, 2010

I have a problem with disabling the tabcontainer.

The problem is that, if a user haven't selected anything, the whole tabcontainer must be disabled. If I disable the tabcontainer it in de codebind, the tabcontainer grayed out but the user can click the tabs.

I can disable one tab in javascript but how can I disable the whole tabcontainer?

View 1 Replies

Web Forms :: Modifying ASP Form Elements With Javascript?

Mar 3, 2011

I'd like to change some properties of ASP Form Elements via Javascript and I am having a very difficult time doing so. The element is defined as:


But Im not having any luck modifying it with Javascript like this:[Code]....

one thing I noticed is that (At least in VS2010 intellisense) the elemtn doesn't seem to have a disabled attribute like a standard HTML


View 7 Replies

Web Forms :: Can't Position Elements In Content Page?

Jan 30, 2010

I'm designing a new site using CSS instead tables to position elements.Until now I was working only with tables.The tests were working well but when I use master pages and try to define the positioning of the page elements inside a content page it not works. The elements are inside a div. The div position is ok but the position of the div elements is not ok at runtime.More strange is that in design mode all works well ...I'm using VS2008.

View 8 Replies

Web Forms :: How To Position Elements In The Middle Of A Block Using CSS

May 27, 2010

When add elements, like text or other controls inside a big <div> block, they are alwasy on the top.

Ex. <div style="height:50px;">this is a test</div>

Does anyone know how to use CSS to position them in the middle of it? I tried using CSS vertical-align, no luck.

View 1 Replies

Web Forms :: Dynamic Addition Of Span / Div Elements

Feb 28, 2011

i have a problem with creating dovs based on the data in the xml file. What i need to do is to create a page where the xml file is loaded and if the give Node has childnodes it should be displayed as a link and after clicking a span or a div with childnode's value should appear under it and afte a second click it should "fold" back. I van use the __postback function from js but the problem is in the dymanic creation of the "child" divs. A portion of the xml file:

<Car name = "Ford">
<Type Name = "Escort">
<Description>Some description of the car</Description>
<Type Name = "Puma">

Given the sample above the value "Escort" should be displayed on page as a link and after clicking a div containing value of the Description node should appear but value "Puma" should appear in normal text as it doesn't have children.

View 4 Replies

Web Forms :: Loop Through The Elements Of MyDataReader.Read()

Oct 28, 2010

cmd objects returns a set of sampleids. i want to loog through those ids as follows.

myDataReader = cmd.ExecuteReader();
some logic.....
catch(exeception ex)
Console.Write("{0}", ex.Tostring());
System.Threading.Thread.Sleep(1000 * 60 * 2);

everthing is working fine. But when the exception rises the exception shown in command prompt.

What i need is .. when the exception rises .. i need to stop my execution for 2 minutes and then start the loop from the same element .. like using goto statment... but for loop it is working fine .. how to implemnt that logic for mydatareader.read().

View 5 Replies

Copyrights 2005-15 www.BigResource.com, All rights reserved