Databinding - Gridview Paging Does Not Work If The Grid Is Not Loaded During Page_load. Tried All Methods

Oct 26, 2010

I have a gridview which I load with data on click of a button. For some reason the paging did not work. The paging number shows up but clicking on page # 2, 3 or 4 does not take you anywhere. the grid just disappears on clicking them. right after that when i click the button to generate the grid, the grid came up this time the gird is on page 2 or 3 instead of 1.

I have the following on page_indexing properly.

Protected Sub GV_Document_Hide_PageIndexChanging(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewPageEventArgs) Handles GV_PSIDocument_Hide.PageIndexChanging
GV_Document_Hide.PageIndex = e.NewPageIndex
End Sub

I even tried by adding the databind() code inside the pageindexchanging as suggested in other threads but that didn't make any difference.

The only way I could get this going was by populating/loading the grid on page_load. I have to assign datasource & databind it every time irrespective of even postbacks. I tried IsNotpostback then the paging failed again Why does gridview needs loading on page_load every time if the paging needs to work properly?

View 2 Replies


Similar Messages:

Gridview Paging Does Not Work If The Grid Is Not Loaded During Page_load?

Oct 26, 2010

I have a gridview which I load with data on click of a button. For some reason the paging did not work. The paging number shows up but clicking on page # 2, 3 or 4 does not take you anywhere. the grid just disappears on clicking them. right after that when i click the button to generate the grid, the grid came up this time the gird is on page 2 or 3 instead of 1. I have the following on page_indexing properly.

[Code]....

View 12 Replies

Forms Data Controls :: GridView Sorting, Paging And DataBinding / When Control Causes A Postback GridView Is No Longer Sorted?

Jan 10, 2011

I'm trying to extend the GridView control to enable sorting and paging for any situation.

When using my control I am fetching data from a database and filling a DataSet with it, then binding the GridView upon every page load. My first question would be, is this the correct approach?

To sort the GridView I am overriding the OnSorting method which stores the sort expression and direction in the ViewState, then creates a DataView and utalises the Sort method to sort the underlying data. It then sets the Data Source to this DataView and rebinds the GridView.

Paging is handled by OnPageIndexChanging which simply sets the PageIndex property and again rebinds the GridView.

My problem is; when any control causes a postback my GridView is no longer sorted, presumably because it is persistently rebound. If I don't rebind it then the GridView is empty on postback since the data isn't automatically stored in the ViewState. I have considered saving the data source in the ViewState but I would assume that this is bad practice for large amounts of data? - also DataViews are not seralisable.

The only solution I can think of currently is to override OnDataBound and sort the data every time. This results in a double sort when paging triggers a postback which seems inefficient. Code illustration of this below,

[Code]....

I'm looking for the cleanest 'best practice' solution as this is a learning exercise more than anything else.

View 12 Replies

Webforms - Working With DataBinding And Page_Load In MVP?

Apr 9, 2010

I'm using WebForms MVP to create some simple reporting applications. Most of these applications consist of a few search criteria inputs and a ComponentArt datagrid that I'm populating with data from the database.

Most of the markup is in a UserControl, which is in a content page with a master page. My problem is that the control's Page_Load event is firing before the control events that caused the postback in the first place. Basically, the user clicks the search button, and Page_Load is fired BEFORE Search_Click. This is messing with the databinding scheme I've been using.

So that's the question: Why is my Page_Load event firing before the event handler, and what can I do about it? I don't THINK this problem is related to WebForms MVP or ComponentArt, but obviously I could be wrong.

View 1 Replies

DataSource Controls :: ObjectDataSource Sorting And Paging In Gridview Using LINQ Stored Procedure Methods?

Jan 31, 2010

I started learning LINQ, So i thought of just creating gridview with sorting and paging using objectdatasource using LINQ. So i got this link

[URL] which Brian Orrel tell us how to do using IQueryable Interface. but i have nearly 300 lines of stored procedure which joins nearly 20 tables. so i thought of creating a stored procedure and using that instead of IQuerytable.

[code]...

View 7 Replies

C# - Page_Load Not Loaded After Inheriting Page?

Jan 10, 2010

I am trying to create BasePage Web.UI.Page that is inherited by my main page. But when i create public class mypage : BasePage method Page_Load of this class is not loaded in page live cycle. BasePage does not contain any Page_Load. has anybody got a clue where can be the problem?

View 5 Replies

How To Use GridView Paging - Grid Disappears

Jan 23, 2010

I'm binding a dataview to a GridView and am trying to use GridView Paging. When I click on one of the page numbers, the Grid disappears.

Code:
If Page.IsPostBack = False
GridView1.AutoGenerateColumns = False
GridView1.AllowPaging = True
GridView1.PageSize = 5
[code]...

View 8 Replies

Web Forms :: Page_load Event Is Not Fired After The Page Loaded Once?

Apr 29, 2010

My aspx page is not showing latest data after reopen the page.. but after save data it shows latest information.

If I close the project and rerun the project then it shows latest data.

Interesting metter is the page_load event is not fired after thie page loaded once.

If I delete temporary internet files from tools-->internet option then the page reloaded.

View 4 Replies

Performance-impact Of Empty Page_Load() Methods?

Mar 23, 2011

When adding a new page or user control to an ASP.NET webforms application, the code-behind class contains an empty Page_Load() event handler:

public partial class Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
}
}

I have an existing web app, where many pages and controls still contain these empty event handlers (they are not used).

Question: Is there any performance impact due to these empty event handlers and should they therefore be removed from all pages and controls?

View 2 Replies

Web Forms :: Databinding Methods Can Only Be Used In The Context Of Databound Control

Sep 8, 2012

   SqlCommand _cmd1 = new SqlCommand("Viewstate2", _cn);
_cmd1.CommandType = CommandType.StoredProcedure;
_cmd1.Parameters.AddWithValue("@behcode", data);
string data1 = Request.QueryString["id"].ToString();
_cmd1.Parameters.AddWithValue("@id", data1);
_cn.Open();
SqlDataReader _dr1 = _cmd1.ExecuteReader();
while (_dr1.Read())
{
lblprice.Text = _dr1["price"].ToString();
Lbldate.Text = System.Convert.ToDateTime(miladitoshamsi(Eval("Date"))).ToString(" yyyy/MM/dd");

In the above code I get the following error

Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.Source Error: 

Line 97: lblprice1.Text = _dr1["price1"].ToString();
Line 98: lblprice.Text = _dr1["price"].ToString();
Line 99: Lbldate.Text = System.Convert.ToDateTime(miladitoshamsi(Eval("Date"))).ToString(" yyyy/MM/dd");

View 1 Replies

Dropdowns Failing With Databinding Methods Such As Eval(), XPath(), And Bind()

Jan 4, 2011

I have four fields on my insert form: Server, Farm, Silo and Reason. Farm and Silo populate based on the name of the server that is entered. If I take out the SelectedValue='<%# Bind("value") %> the form doesn't error out, but the fields don't post back to the DB.

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<%@ Page Language="C#" %>
<html dir="ltr" xmlns="http://www.w3.org/1999/xhtml"> runat="server">
<meta content="en-us" http-equiv="Content-Language" />
[code]...

View 6 Replies

Make AJAX Redirects - Page_Load Methods In .aspx And In An .ascx ?

Jan 5, 2010

Ok, this is a bit different scenario. I guess I would have to think about doing it this way sort of with MVC anyway if we were actually using MVC...but we're not at the moment.So I've got and .aspx page. In that .aspx page is a user control (.ascx). And in that user control is a custom control (.cs).

The custom control has a repeater in it. So I'm showing a list of items on that .aspx through the .ascx's custom control. For each item in the repeater is a button. It's just a hyperlink, just a regular on my page When you click that button, it redirects to whatever page you're on. Since the custom control never knows what your parent .aspx page is, I'm doing a redirect to the self .aspx by doing a Response.Redirect(Request.Path). So that way it always redirects to whatever .aspx is using that user control and custom control.

So after it redirects to self, I check the querystring in the page_load of whatever .aspx is using it. If the value is true, then I handle it however the .aspx wants to. In this case when it's true, I call a method in the code behind of my .aspx that handles the action for the button. For example lets say that button was "Add to Shopping Cart", the .aspx handles that action and calls a AddToCart method in the .aspx.cs.

I'm not using an ASP.NET control for the actual hyperlink and button because I just don't need it and in my particular case I'm using a user control and a custom server control.For this instance, I had some issue where I didn't wnat to use an ASP.NET control...I forget why but the point is, no this is what it is.

So with that, I'm trying to figure out how I can apply some AJAX here call to call that method instead. I still need to somehow redirect again back to the same page like I'm doing...I'm doing the redirect in that method after all the logic at the end. I am redirecting again back to the same page, because I need my Page_Load methods in my .aspx and also in an .ascx to still fire off after that method is completed.So I am not sure where to start on this. Let me go through this once again:

Custom control has a repeater in it and in the repeater, each item has a standard HTML hyperlink (non ASP.NET control) which wraps a standard image tag (image is a button)User control contains the custom control The .aspx page contains the user control User clicks the butt on and hyperlink redirects them to the parent .aspx page that is using this custom control...so it callsResponse.Redirect(Request.Path)

In the code-behind of this .aspx, in my page_load I check a querystring flag to see if I performed that action..meaning user clicked that button. For example one of the querystring params is "AddItem" and another querystring param is "itemID". If movedItem is true, then I fire off a method called MoveItem(int itemID) Method MoveItem is called Method MoveItem redirects again back to this same .aspx using Response.Redirect(Request.Path).. this is so that the page load is hit again as well as my .ascx page load is hit. Because in both those page loads, I rebind a repeater so I can show the latest state of the lists. I call a method in my .aspx page_load which rebinds a grid and then page_load in my .ascx also calls another method which rebinds some other list

View 1 Replies

Databinding Methods Such As Eval()/ XPath() And Bind() Can Only Be Used In The Context Of A Databound Control

Apr 3, 2010

I am getting the following error

Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.

but all I am trying to do is inside a ASP.NET REPEATER Control

<% if ( Eval("Message").ToString() == HttpContext.Current.Profile.UserName) %>
<% { %>
<asp:ImageButton runat="server" etc.... />
<% } %>

View 2 Replies

Statement Within Formview / Error Databinding Methods Such As Eval(), XPath() And Bind()?

Jan 22, 2010

i have a FormView, it renders fields from a SQLServer database but also much static text specific to the database value I get. I dont know if this can be done in the code behind and put all this in a function . I put it in my formview

<ItemTemplate>
<% If Eval("Feature1") = "Yes" Then %>
<%# Eval("Username") %> A lot of text
<% elseIf Eval("Feature1") = "No" Then %>
<%# Eval("Username") %>

A lot of different text

<% End If %>
</ItemTemplate>

If I do the code above I get error message:

Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control. Can this be done within the formview?

View 1 Replies

Gridview Paging And Sorting Do Not Work After Changing Datasource In Codebehind

Mar 5, 2010

I am having a gridview with an object datasource binded in the markup(aspx page).When page loads it directly works fine with all sorting and paging properties.However, i need to filter display on gridview so i have to change the datasource of the gridview on the code behindIt works fine.. i mean the filtering and displaying is good but paging and sorting doesnt work.

View 1 Replies

Ajax - Gridview Paging Doesnt Work Inside UpdatePanel

Jan 26, 2011

Altough questions somehow similar to this have been asked for a number of times, but the question is still unsolved. Here is the question: I have a gridview which is contained in a tab container ajax control which itself is inside an updatepanel. Gridview works excellent and its corresponding methods are fired accurately, but when I enable paging, (e.g.) after I click on page 2, the gridview hides itself. here is my PageIndexChanging method:

protected void GridView1_PageIndexChanging(object sender, GridViewPageEventArgs e)
{
GridView1.PageIndex = e.NewPageIndex;
GridView1.DataBind();
UpdatePanel2.Update();
}

Why paging causes gridview to stop working correctly? What can I do?

View 2 Replies

Error - Databinding Methods Such As Eval(), XPath(), And Bind() Can Only Be Used In The Context Of A Databound Control

Aug 11, 2010

[code]....

gives me error: Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.

I could write : <%# Eval("SaveDate") != DBNull.Value ? do magic But I need to do lots of html magic in if statement.

I know I should add # in order to use Eval, but not sure about correct syntax.

View 2 Replies

Gridview - Built In Asp.net Grid Controls (or Similiar) Provide Effecient Data Paging

Apr 26, 2010

know in asp.net 1.0 the grid display controls would pull all the data in, and then provide paging but the paging was done in memory.Are there any smarter controls that provide paging where they only pull the data relevent to current page being displayed?ie. select 10 rows for the current page, instead of doing a select of ALL the rows in the table.

View 1 Replies

Forms Data Controls :: Set Paging On Gridview But When Click On A Page It Doesn't Work?

Feb 26, 2010

I'm trying to set paging on my gridview but when i click on a page it doesn't work. It return a blank page. Here's my code:

[Code]....

Behind code:

[Code]....

View 9 Replies

Forms Data Controls :: Paging Repeater Control In Databinding?

May 3, 2010

I have a strange problem. I have made a PagedRepeater control, which inherits from the Repeater, from a tutorial I saw here: http://www.4guysfromrolla.com/articles/020905-1.aspx. It's in VB and I'm in C#, and it didn't quite have all the features I was lookingfor, so, I've modified it quite a bit. I added support for a SqlDataSource control, as well. The only problem is, that it always returns the first item from the SqlDataSource, even when the CurrentPageIndex on the PagedDataSource is set to a different value.

View 1 Replies

C# - Databinding Does Not Work?

Dec 12, 2010

In MainPage.aspx I have

<asp:HyperLink runat="server" NavigateUrl='<%#"http://google.pl"%>'>test</asp:HyperLink>

It does not add an href tag but only outputs <a>test</a>.
When I do:

<asp:HyperLink runat="server" NavigateUrl='http://google.pl'>test</asp:HyperLink>

It works fine.

Why <%#"http://google.pl"%> does not work ?

How to debug it ?

View 4 Replies

Page_Load Events Executed Every Time A Page Was Loaded Not Just The First Time?

Aug 5, 2010

I thought that Page_Load events executed every time a page was loaded not just the first time. Am I wrong on this?

I have a Page_Load event that writes text to a label to display on the screen: Output.Text &= "Welcome to my Website <br />" (Output being the ID of a Label control)

I also have an On_Click event for a button to display the same information: Output.Text &= "Welcome to my Website <br />"

After clicking the button, I expected to see the output twice. Once for the page being reloaded and once for the click event. I thought that Page_Load events executed every time a page was loaded not just the first time.

View 3 Replies

AJAX :: GridView Inside A ModalPopUp / Work On The Grid Without The Pop Up Closing Everytime?

Apr 14, 2010

I have a GridView inside a ModalPopUpExtender and would like to know how I can ensure that I can work on the grid without the pop up closing everytime i click on say 'edit' or 'delete' on the grid items.

At the minute my pop up is working great, then i click on 'edit' on a row in the grid and it the pop up closes, I then click the button to fire up the pop up again and the grid is in the mode i wanted it to be in!

View 2 Replies

Image Is Not Set To Imagecontrol And Jquery Plugin Doesnt Work On Second Page_Load

Feb 13, 2011

When Page_Load is running the first time, I set Image 1.jpg to the HTML control with sucess!When Page_Load is running the second time, the Image 2.jpg is Not set to the same HTML control?This even that it should though I use a MessageBox to se that the C# code is running that should set 2.jpg to the control

View 2 Replies

MVC :: Extension Methods To Search Jquery Grid?

Apr 5, 2010

I have jquery grid I need to search the grid results..

I thogught best method to search like string,bool, decimal, byte..

better to write the extension methods?how to write the extension methods to search the jquery grid using asp.net mvc control..

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved