Accessing Property Value Of A Custom Control By Another Custom Control In Design-time
Oct 18, 2010
I created an Extender which has a custom property that drills down a list XML elements from an xml file, where users can select xml elements during design-time. This works perfectly fine. However, my code only has a hardcoded xml filename (source of the xml elements list) and I need to change this by maxing the xml file user-specified.
What I did is that I created another control (panel) which has a custom property that when clicked (through the ellipsis), it will allow a developer to select the xml file which is supposed to be the source xml file that the Extenders shall use. The filedialog from custom panel's property works perfectly fine.
However, my problem now is that when I drag-drop my Extender, I cannot find a way to get the property value of the custom Panel Control which contains the xml filename. I tried creating a static variable which I thought the custom controls can share but VS2010 is breaking.
View 4 Replies
Similar Messages:
May 13, 2010
I was referred here by MSDN forums hope this is the right place - I have a custom control (:WebControl) that renders web.sitemap in a specific way. While it runs error free and produces the expected result, at Design-Time it complains
[Code]....
and have tried the SiteMapDataProvider Tag with and without the SiteMapProvider
attribute.Does anybody have (a) any experience with this, or (b) any suggestions as to how to track down the problem?
View 3 Replies
Feb 9, 2010
I'm developing a set of custom controls, one of them are the "parent", any others must be added inside an ITemplate property of this parent. But in the page, at design time, I can see, by intellisense, the other controls at page level, and I can theorically add them everywhere. I want to emulate the behaviour of the asp:Table and the asp:TableRow, you can't directly add an asp.
View 2 Replies
Apr 19, 2010
I have use composite custome control its contain button and textbox and gridveiw
but design time gridview is not display .
View 1 Replies
Aug 13, 2010
I have created a custom control from scratch and it works fine as in you can build the project that uses it and it works fine at runtime. Problem is when you go to design view the control shows an error in the place of where the control should be rendered.
Error: '<SomeValue>' Could not be set to '<SomeProperty>'
This shows up on all my custom set properties. These properties are created as basic as possible. I can give the properties values in Source view and run the app just fine. I can even add a Onclick event. If I don't set any custom properties the control will render fine in Design view. It's only when I set a value to a custom property.
Property Code Example:
[Code]....
I've even removed the Category and Description tags with no difference.
I don't know if what I said makes sens, but I hope it does.
View 3 Replies
Jun 14, 2010
I seriously want to learn how to create a custom server control, for that I made a requirement for myself, but lost on how to accomplish it.
Requirement -I want to create a cascading dropdownlist control - which should have following properties -1) ConnectionString - used to get data for the 1st dropdown from database, and also it is used by 2nd DropDown to get data.2) 1stSelectCommand - Used by the 1st DropDown to get data from the database.3) 2ndWhereCommand - used by the 2nd DropDown - uses the selected value from the 1st DropDown in the where clause to get data.
Methods - 1) DropDown1_SelectedIndexChanged()2) DropDown2_SelectedIndexChanged(3) CustomCascading_Changed() - this happens when any of the DropDowns index changed.
PS - This is a random requirement, of course it got nothing to do with any project or real time.I want to learn, so i incorporated basic concepts like Data Access, Custom Methods, Properties etc.PPS - I know how to create basic custom server control, so plz dont forward me links to how to create basic custom server controls. But in case with extrordinary links.
View 6 Replies
Apr 25, 2010
I have a simple HttpHandler that generates a dynamic image based on query string parameters and a custom web control that renders an image tag pointing to the handler as its 'src' attribute. All works fine when run in the web server, but at design timethe control displays as the "missing image" icon (red x in a box). The handler is registered in the web.config with a ".ashx" extension. The RenderContents method in the control looks like this:
output.AddAttribute("src", ResolveUrl(string.Format("~/Sparklines.SparkHandler.ashx?stype=pm&w={0}&h={1}&sv={2}&ev={3}&cv={4}&sc={5}&ec={6}&mc={7}&gs={8}",
Width.IsEmpty ? 100 : Width.Value,
Height.IsEmpty ? 15 : Height.Value,
caleStart, ScaleEnd, CurrentValue,
ColorUtils.ColorString(StartColor, true),
[code]...
View 5 Replies
Sep 3, 2010
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
View 2 Replies
Oct 15, 2010
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
View 4 Replies
Mar 15, 2010
I have a custom control, inherited from Button. This is the class definition for the control and 2 properties:
[Code]....
I show you 2 properties, only to illustrate the problem.
as you see Aplicacion property is of a custom type Sistema, and Roles property is of type List<UserRol>.
The Aplicacion property is rendered well, this way:
[Code]....
The problem I have is with List<UserRol>. I couldn't get it to be rendered. I expeect to be rendered this way:
[Code]....
Finally, this is the TypeConverter and Editor definitions for the list:
[Code]....
The UserRol class is a typical class, without any special attributes.
I have discovered that when I use the custom editor for Roles property, the collection is not persisted. When I use the default editor for the collection, the collection is persisted.
View 1 Replies
Nov 26, 2010
I need to create one custom text box control which should be bind with data base.
I am referring following link...
http://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.databoundcontrol.aspx
I used DataBoundControl to create my control but i am not able to do it properly.
public class SimpleTextBoxControl : DataBoundControl
{
private TextBox nameTextBox;
public string DataTextField
{
get
{
object o = ViewState["DataTextField"];
return ((o == null) ? string.Empty : (string)o);
}
set
{
ViewState["DataTextField"] = value;
}
}
[
Bindable(true),
Category("Data"),
DefaultValue(""),
Description("The text to display on the link."),
Localizable(true),
PersistenceMode(PersistenceMode.InnerDefaultProperty)
]
public virtual string DataTexValue
{
get
{
string s = (string)ViewState["Text"];
return (s == null) ? String.Empty : s;
}
set
{
ViewState["Text"] = value;
}
}
protected override void PerformDataBinding(IEnumerable retrievedData)
{
if (retrievedData == null)
return;
base.PerformDataBinding(retrievedData);
Controls.Clear();
nameTextBox = new TextBox { ID = "nameTextBox" };
foreach (object dataItem in retrievedData)
{
if (DataTextField.Length > 0)
{
nameTextBox.Text = DataBinder.GetPropertyValue(dataItem, DataTextField, null);
}
DataTexValue = nameTextBox.Text;
}
this.Controls.Add(nameTextBox);
}
}
View 1 Replies
Dec 26, 2010
I have built a custom control. when i add this custom control in my page twice or more then the it write only one time of its render contest data.
View 4 Replies
Jan 11, 2011
I have created an asp.net custom control and now want to pass some values to it from the page which will use the control.Is there any way i can add my own property to the control (like Text property is present for a Label control)?
View 4 Replies
Aug 9, 2010
I have a site using eight (so far) custom web user controls and two of them have started misbehaving in design view. When designing the control itself some (in one control) or all (in the other) regular controls (labels, text boxes, etc.) disappear from the design view surface. They can still be seen in the source view and if the control is hosted on a regular .aspx page the control displays properly. The code window recognizes all controls in the objects dropdown list and I can write appropriate code. The controls run properly on their hosted pages.
If I switch to Split view and select controls in the source view panel a very small area od the design surface becomes selected (like one pixel for any of us who remember programming old DOS applications with 80-column screens) but no controls can be seen.
In short, the controls work in every respect except that I cannot see all or part of the design surface in Design view when editing the controls directly.
I've double-tripple checked the source code for anything that may be causing this and just don't see anything. (The controls aren't that complicated.)
View 2 Replies
Sep 13, 2010
How would I add a (dropdown) list of available values for a custom server control property?
(Just like 'Visible' property of most controls has valid values of 'True/False' and nothing else can be entered or selected)
View 3 Replies
May 19, 2010
I am developing one custom control. I dont want default web control property should be in my custom control.For example.[Code]....
When you put this control in the page, you will see default web control property such as Font,Border,Width,Height.... I want to show only those properties that I define in my class.Suppose, I have three property defined in class then only three properties will be visible for control, other default web control proeprty should be hide or invisible.
View 3 Replies
Feb 3, 2010
I have a custom control that is based off the gridview control located at: here The control is basically a gridview that automatically creates a column of checkboxes that can be used to "check" individual rows in the gridview. During the gridview's "CreateColumns" event, the "checkboxcolumn" is created dynamically. The checkboxcolumn also contains another checkbox in the header that is used to "select/deselect all" checkboxes in the column. Since the gridview does not automatically remember the state of the checkboxes in the checkboxcolumn on postback, I added a method to the control called "SaveCheckBoxState" which stores the indexes of the checked rows in Viewstate, and then I modified the "OnRowDataBound" event to check the Viewstate and reset the checkboxes based on the Viewstate.
I then added a call to "SaveCheckBoxState" in the gridview's OnSorting and OnPageIndexChanging events. This works great so long as I'm sorting or changing pages. However, I need it to update the viewstate everytime someone clicks or unclicks one of the checkboxes. At this time, the checkboxes are rendered with an onclick event that calls some javascript to highlight the row, or in the case of the checkbox in the header, to select/deselect all checkboxes. I need to call the "SaveCheckBoxState" method from the javascript used by the customcontrol, or I need to find a way to modify viewstate from javascript and perform the same action as "SaveCheckBoxState".
I've tried adding the "SaveCheckBoxState" to the onclick event declaration in the checkboxes, but when run, it simply tells me that the method is undefined. It doesn't exist in the parent page, and I don't think I should have to make an event for the parent page to pass the click to. It seems to me this should be all self contained within the custom control. Does anyone know how I can acheive this? Here is the code for the gridview OnPreRender event where the onclick event of the checkbox is set:
protected override void OnPreRender(EventArgs e)
{
// Do as usual
base.OnPreRender(e);
// Adjust each data row
foreach (GridViewRow r in Rows)
{
// Get the appropriate style object for the row
TableItemStyle style = GetRowStyleFromState(r.RowState);
// Retrieve the reference to the checkbox
CheckBox cb = (CheckBox)r.FindControl(InputCheckBoxField.CheckBoxID);
// Build the ID of the checkbox in the header
string headerCheckBoxID = String.Format(CheckBoxColumHeaderID, ClientID);
// Add script code to enable selection
cb.Attributes["onclick"] = String.Format("ApplyStyle(this, '{0}', '{1}', '{2}')",
SelectedRowStyle.CssClass,
style.CssClass,
headerCheckBoxID);
// Update the style of the checkbox if checked
if (cb.Checked)
{
r.BackColor = SelectedRowStyle.BackColor;
r.ForeColor = SelectedRowStyle.ForeColor;
r.Font.Bold = SelectedRowStyle.Font.Bold;
}
else
{
r.BackColor = style.BackColor;
r.ForeColor = style.ForeColor;
r.Font.Bold = style.Font.Bold;
}
}
}
View 1 Replies
Mar 4, 2010
I have a custom control which inherit from the Table class and in the constructor, it takes a an integer as an argument. There is no empty constructor.
Is there a way for the user to set that variable in the properties window after they drag the control onto a form.
I know some .NET controls, you can set the source for the parameter to different things like another control's property, QueryString using just the properties window.
Right now, I have to create the control dynamically. I read the query string and then created the object.
View 1 Replies
Dec 24, 2010
here's a situation and I would appreciate your response.
I have programmatically created the Wizard control:
Page_Load(obj s, evargs e)
{
Wizard ClaimDetailWizard = new Wizard();
foreach(int item in selectedItems)
{
//create new step
//added custom control to new step
//add step to wizard
}
//added wizard to a placeholder on a page
}
Based on List I get from Session i added new steps to my wizard To each step I had added a custom control
Each custom control in tern contains another custom Gridview Control in it.
So here's the problem when the page loads for example for two steps. All is good Wizard does what it's supposed to do.
But when I try to use sorting or paging in that custom Gridview. Somehow it displays the gridview I should see in the next step of the wizard.
Also what I'm noticing through debugging. Is that when I press next in the wizard I go back to the original page where I do all of the code specified above, and it recreates the wizzard. But it goes to the next step. Is this the way wizard supposed to work? Just doesn't seem very efficient.
View 1 Replies
Dec 20, 2010
created a Custom Textbox Control that is intended to be a "masked date" textbox, so that I can handle different ways a user might enter in a date and make it work no matter what.I did this by creating a custom control with 3 separate Textboxes one for month,one for day one for year,then do some handling for different things that could be entered and it would all work.
The problem I am having is,when I add this control to the page,if I do an alert to check the Text value of the custom control it just gives me "[ServerControl1]" even if I enter in a date.
I tried doing an AutoPostback after entering so that it would refesh the Viewstate to have the values of the textboxes but the control doesnt seem to actually postback, even though I have it enabled.accessing the Textbox value after someoen
has entered a date?first custom control I have created and have been using google.
My Server Control Code is as follows:
[Code]...
View 1 Replies
Aug 7, 2010
I'm writing a custom class library that contains custom controls (not user controls).I have some embedded javascript files that need to be registered on the page.Now since this is a class library, how do I detect whether or not to use a ToolKitScriptManager or ScriptManager?Page.ClientScript is a ClientScriptManager, but would I do if the page has the new ToolKitScriptManager?
View 1 Replies
Oct 27, 2010
I have created a user control and am ready to convert it into a custom control. I am trying to follow:
[URL] the steps mentioned in the link.
I am not seeing Build / Publish Web Site option.
I am using VS 2008. I only see Publish User Control but it doesn't give all the settings mentioned below. When I do publish user control, it just copies the ascx file to the desired location. how can I convert the user control to custom control.
View 2 Replies
Jan 28, 2010
I am writing a survey generating system in asp.net. i asked an ealier question about the best way to create controls that can be passed about as variables. This was problematic with user controls so i was advised to use custom controls and a quick way to do this was to inherit from the panel control and just add a bunch of standard controls the the controls collection by overriding the CreateChildControls method. This way i could create my "survey" controls,which are basically Questions in the survey. THe question controls are then dynamically added to the page. This all works well but know i have come to the point that i want to try and retrieve the values from these controls and i seem to be lost in a nether world of of viewstates and page lifecycles. I can ensure that the dynamically added text boxes have a known ID, however even if i add the parent control in the page init handler the CreateChildControls method does not run until after until after the viewstate is loaded. I cannot work out how to retreive the values from these text boxes.
View 2 Replies
Jun 10, 2010
does anyone know how to access a webpart using the HTML Document Object Model? for example: for a given page which contains a webpart manager and a webpartzone.
[Code]....
I cant access the custom control using the HTML DOM Like this: HtmlDocument doc = HtmlPage.Document;
HtmlElement element = doc.GetElementById("HostTest");
HtmlElement element1 = doc.GetElementById("silverlightControlHost");
HtmlElement element2 = doc.GetElementById("WebPartZone3");
HtmlElement element2Parent = element2.Parent;
HtmlElement element3 = doc.GetElementById("SLRoomConsumerPart1"); //element3 does not return anything at all just Null!
all of the other elements are returned except for element 3 which returns a null! Any controls (regardless if it is a custom control, ASP control, Usercontrol . i tried it by replaceing the custome control with an aspnet button. i go t a null value as well) placed in the <ZoneTemplate> Tag of the <WebpartZone> is not returned using the HTML DOM. I find this stupid and pointless, as the whole point of a webPart is that you can place all sorts of controls in it :
customcontrols, usercontrols html controls, html server controls, aspnet controls and you cant seem to get access to those controls using the HTML DOM model in codeBehind
<asp:WebPartZone ID="WebPartZone3" runat="server" Height="90%" Width="
<ZoneTemplate>
<cc1:SLRoomConsumerPart ID="SLRoomConsumerPart1" runat="server" />
</ZoneTemplate>
</asp:WebPartZone>
HtmlDocument doc = HtmlPage.Document;
HtmlElement my_WeBpart_Element = doc.GetElementbyId("myCustomWebPartControl1")
can anyone point me to a solution or a work around as i am trying to access the dom from silverlight 3 but should be exactly the same as doing it from the webpart'shosting page's code behind. so that i can reference the controls inside my web part from the code behind of the custom page once i get hold of the webPart Element referece.
View 6 Replies
Sep 29, 2010
I'm trying to do something which to me seems like it should be simple, yet I cannot think of a simple way to do it.
I have a built custom control, that has a property I want to change based on a user's interaction with a second custom control. This second control will be a table of data, with an 'edit' link in the last column. I would like the control, when the edit link is pressed, to pass an ID and trigger some event so that I can assign this ID to the first control. My initial technique for building this (second) control was to create some code which will iteratively create some html based on a dynamic range of data selected by the user. I know that I could create some sort of link with a value in the query string, but I would like to implement AJAX and was hoping that I could enable this communication without changing the URL.
View 1 Replies
