I have created an asp.net custom control and now want to pass some values to it from the page which will use the control.Is there any way i can add my own property to the control (like Text property is present for a Label control)?
View 4 Replies
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
I have a custom control, inherited from Button. This is the class definition for the control and 2 properties:
[Code]....
I show you 2 properties, only to illustrate the problem.
as you see Aplicacion property is of a custom type Sistema, and Roles property is of type List<UserRol>.
The Aplicacion property is rendered well, this way:
[Code]....
The problem I have is with List<UserRol>. I couldn't get it to be rendered. I expeect to be rendered this way:
[Code]....
Finally, this is the TypeConverter and Editor definitions for the list:
[Code]....
The UserRol class is a typical class, without any special attributes.
I have discovered that when I use the custom editor for Roles property, the collection is not persisted. When I use the default editor for the collection, the collection is persisted.
I need to create one custom text box control which should be bind with data base.
I am referring following link...
http://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.databoundcontrol.aspx
I used DataBoundControl to create my control but i am not able to do it properly.
public class SimpleTextBoxControl : DataBoundControl
{
private TextBox nameTextBox;
public string DataTextField
{
get
{
object o = ViewState["DataTextField"];
return ((o == null) ? string.Empty : (string)o);
}
set
{
ViewState["DataTextField"] = value;
}
}
[
Bindable(true),
Category("Data"),
DefaultValue(""),
Description("The text to display on the link."),
Localizable(true),
PersistenceMode(PersistenceMode.InnerDefaultProperty)
]
public virtual string DataTexValue
{
get
{
string s = (string)ViewState["Text"];
return (s == null) ? String.Empty : s;
}
set
{
ViewState["Text"] = value;
}
}
protected override void PerformDataBinding(IEnumerable retrievedData)
{
if (retrievedData == null)
return;
base.PerformDataBinding(retrievedData);
Controls.Clear();
nameTextBox = new TextBox { ID = "nameTextBox" };
foreach (object dataItem in retrievedData)
{
if (DataTextField.Length > 0)
{
nameTextBox.Text = DataBinder.GetPropertyValue(dataItem, DataTextField, null);
}
DataTexValue = nameTextBox.Text;
}
this.Controls.Add(nameTextBox);
}
}
How would I add a (dropdown) list of available values for a custom server control property?
(Just like 'Visible' property of most controls has valid values of 'True/False' and nothing else can be entered or selected)
Hope this is the correct forum for this question. I am using VWD 2010 an have a web project and get the following error upon execution:
Parser Error Message: Unknown server tag 'custom:AjaxValidator'.
My code is as follows in the .cs file:
[Code]....
[Code]....
How insert a drop list property into a custom webcontrol? This a drop list property is show all textbox control on usercontrol or webpage.
View 3 RepliesI know that how to create custom control and add custom property.
I want to create property like DataSource to my custom control.
I created an Extender which has a custom property that drills down a list XML elements from an xml file, where users can select xml elements during design-time. This works perfectly fine. However, my code only has a hardcoded xml filename (source of the xml elements list) and I need to change this by maxing the xml file user-specified.
What I did is that I created another control (panel) which has a custom property that when clicked (through the ellipsis), it will allow a developer to select the xml file which is supposed to be the source xml file that the Extenders shall use. The filedialog from custom panel's property works perfectly fine.
However, my problem now is that when I drag-drop my Extender, I cannot find a way to get the property value of the custom Panel Control which contains the xml filename. I tried creating a static variable which I thought the custom controls can share but VS2010 is breaking.
i have created a new user control who contains a gridview so, my prolem now is that i want show all the property of the gridview included in the control, but i want not write like this:"Usercontrol1.GridView1.Datasource=...." but i want write "Usercontrol1.DataSource=..." and this also for other controls how can i do this?
View 1 RepliesI need a way to create unique values for a property in my custom server control..
In this case I will have the poroperty called "Name" and I neeed the value of Name to be unique for each "instance" of the control...
So for instance if I have a page with more then one instance of the control, I dont want the value of the Name property for these instances to be allowed to be the same..
...to put it kind of simple, if I dont remember this incorrect, I want it to be sort of like the ID property..but with another name then ID.
The built in Asp.Net Controls (label, Textbox, etc.) all have a CssClass property that can be set, what do I need to do to implement that for a Web User Control?
I know how to add a property and pass thru the get & set to the corresponding Asp.Net control (example if I have a label I know how to create a LabelCssClass property that provides a get & set, but the control itself how do I set a CssClass or ClassName property.
[Code]....
When i add this control to a page i set it's address with Address property. But it never sets it's address property like this :
[Code]....
When i try it like above, it always set address null. So it never goes to webpage that i want. It's result in the address bar always like this :
http://localhost:4533/TarihKoruma/?Date=12.05.2010 but i want it like this :
http://localhost:4533/TarihKoruma/Events.aspx?Date=12.05.2010
How to set default Height/Width property value of Composite control
[Code]....
I have a custom control which inherit from the Table class and in the constructor, it takes a an integer as an argument. There is no empty constructor.
Is there a way for the user to set that variable in the properties window after they drag the control onto a form.
I know some .NET controls, you can set the source for the parameter to different things like another control's property, QueryString using just the properties window.
Right now, I have to create the control dynamically. I read the query string and then created the object.
I am trying to build a custom composite control, which allows me to add custom content to each child control. It's a similar concept to what you have with a GridView and TemplateColumn. The markup used to place the control on the page would end up being something like this:
[Code]....
I have the code below, which allows me to put that markup on the page without throwing any errors, and it renders all the correct HTML, except it doesn't render the contents of the ColumnTemplate. I have replaced the Render() code with a comment because it's quite long winded and doesn't add anything important here:
[Code]....
I have tried to follow examples on MSDN and other forums but I can't make this work. I think I'm missing the code to render the contents of the template, but I don't know how to hook that up.
here's a situation and I would appreciate your response.
I have programmatically created the Wizard control:
Page_Load(obj s, evargs e)
{
Wizard ClaimDetailWizard = new Wizard();
foreach(int item in selectedItems)
{
//create new step
//added custom control to new step
//add step to wizard
}
//added wizard to a placeholder on a page
}
Based on List I get from Session i added new steps to my wizard To each step I had added a custom control
Each custom control in tern contains another custom Gridview Control in it.
So here's the problem when the page loads for example for two steps. All is good Wizard does what it's supposed to do.
But when I try to use sorting or paging in that custom Gridview. Somehow it displays the gridview I should see in the next step of the wizard.
Also what I'm noticing through debugging. Is that when I press next in the wizard I go back to the original page where I do all of the code specified above, and it recreates the wizzard. But it goes to the next step. Is this the way wizard supposed to work? Just doesn't seem very efficient.
i am new to technology so go easy on this post according to what i read from web there are 3 type of custom server controls 1 superclass2 composite 3 renderedi found video tutorial for superclass custom server control but couldnt find video tutials for other 2.lease forward me link for composite and rendered custom server controls video tutorial
View 1 Repliescreated a Custom Textbox Control that is intended to be a "masked date" textbox, so that I can handle different ways a user might enter in a date and make it work no matter what.I did this by creating a custom control with 3 separate Textboxes one for month,one for day one for year,then do some handling for different things that could be entered and it would all work.
The problem I am having is,when I add this control to the page,if I do an alert to check the Text value of the custom control it just gives me "[ServerControl1]" even if I enter in a date.
I tried doing an AutoPostback after entering so that it would refesh the Viewstate to have the values of the textboxes but the control doesnt seem to actually postback, even though I have it enabled.accessing the Textbox value after someoen
has entered a date?first custom control I have created and have been using google.
My Server Control Code is as follows:
[Code]...
I am creating custom server control. I have two classes in project. One is main class that render control and another will be used to render content based on condition.I just want to know how to render content from other classes in main class.For example. This isjust an example.My main class code
[Code]....
My TopLeftPane class
[Code]....
My page code on page load event
[Code]....
When I run the page, Header title always getting null. This is a just sample code. I will have more than 20 classes so I dont want to write a code in main class to render whole control.I hope all of you understand my problem.
Case : a templatefield Text Box created by class TemplateHandler and added to the composite
control Grid .how to bind it to the DataSource Object of the Grid Class ?
I have to use inline code for an aspx page and I need to use a custom server control that is defined in the same aspx page but the control does not get processed as a server control. it gets returned as is as static html tag.
View 3 RepliesI have a User Control (ascx) and a property which a want to display in my categories tab in Visual Studio in the category named "Styles".
[Code]....
And here is the problem: Actually I do not need a get, because I only have to set the property (write only property). But when I omit the get, the property is displayed in the "Misc" category in the categories tab in Visual Studio. Only when I code the get as well, then the property is displayed correctly in the "Styles" category in the categories tab in Visual Studio.
Does anybody know why? How can I display the category correctly only with set?
I have created a user control and am ready to convert it into a custom control. I am trying to follow:
[URL] the steps mentioned in the link.
I am not seeing Build / Publish Web Site option.
I am using VS 2008. I only see Publish User Control but it doesn't give all the settings mentioned below. When I do publish user control, it just copies the ascx file to the desired location. how can I convert the user control to custom control.
