Validation Rule Belong To Multiple Groups?

Feb 18, 2010

Is it possible for an ASP.NET Validation Rule to belong to multiple groups? I'd like to validate the same control in different ways based on what mode the form is in using a single Validator. For the purposes of this question, the modes are Simple, which requires fewer fields, or Complex, which requires more fields. I know I can write CustomValidators (which I have done in the past), but I'd like a simpler solution.

So, I'd like to combine the following:

<asp:RequiredFieldValidator ValidationGroup="Simple" ControlToValidate="Name" />
<asp:RequiredFieldValidator ValidationGroup="Complex" ControlToValidate="Name" />

View 2 Replies


Similar Messages:

JQuery :: Same Validation Rule Multiple Times On Single Field?

Feb 8, 2011

Is it possible that i can use same validation rules more than one time on same field in jquery ?

For ex. if i have one textbox and i want to validate it. can i use two regular expression which can be checked one after another ?

View 3 Replies

C# - How To Validate Against Multiple Validation Groups

Mar 14, 2011

I have a Form like this.

UserID has to be validated when user clicks "Check Availability" and "Submit"

Hence "UserID" required field validator has to be assigned two grops.

As if now it is assigned only Group1

[code]....

I have already gone through How to validate against Multiple validation groups?

which talks about validating Group1 and Group2 when user clicks "Submit" which is a good alternate solution.

View 1 Replies

How To Validate Against Multiple Validation Groups

Mar 24, 2010

I have two validation groups: parent and child

I have an add button that needs to only validate the child validation group which is easily done. The save button needs to validate against the parent and child validation groups, both client side and server side. I think I know how to do it server side by calling the Page.Validate("groupname") method for each group, but how can it be done client side?

View 1 Replies

Web Forms :: Multiple Validation Groups,validate Only One On 1 Submit Button?

Mar 7, 2011

I have two validation groups 'Sub' and 'Normal'and i have some checkboxes . .

I need to validate depending on value of checkbox how to do this . .

View 5 Replies

Web Forms :: To Validate Multiple validation Groups With The Click Of One Button?

Apr 1, 2010

I need to be able to validate multiple validation groups with the click of one button. My Form consists of two text boxes and a drop down list for input. The form also, currently, has three buttons, one for each control. Each of those buttons are tied to a validation control and if the validation is successful, it will add the user inputted data into a database that I have. The interesting part comes when I need to add a forth button which will act as a "Save All" Button. When this button is clicked, I need it to fire the three validation groups.

Is it possible to add multiple validation groups to the "Save All" Button?

View 2 Replies

Data Controls :: Validate Multiple Validation Groups In GridView

May 7, 2015

I have a Dynamic GridView on a page as below. The user can add or delete rows. When inserting record, the code is executed one row at a time. I have 3 rows to be inserted to the database. Here is the issue:

-if the first row is not completed, then no record is added to the database

-if the first row is completed and the second row is not, then only the first row is inserted in the database

-if the first row is completed, the second row is not complete, and the third row is completed, then only the first row is inserted in the database.

below is the code:

protected void GridView1_AddNewRecord(object sender, EventArgs e)
{
string constr = ConfigurationManager.ConnectionStrings["DatabaseVestConnectionString1"].ConnectionString;
SqlConnection con = new SqlConnection(constr);
SqlCommand cmd;
string query1 = "INSERT INTO kart_Bestilling(SakBehandlingCode, KystverketRegionID, KystverketAvdelingID, BestillerReferanse, BestillerLeveringAdresse, BestillerPostKodeBy, BestillerNavn, BestillerStilling, BestillerEpost, BestillerTelefon, BestillingBeskrivelse, BestillingDato, BehandlingSakNummer, BehandlingBeskrivelse, BehandlingStatus)" +

[code]...

How to arrange this piece of code to validate all rows before any insert? or avoid inserting a row if there is one row not complete?the conditions starts with int rowIndex = 0;

if (txtBestillerReferanse.Text != "" && txtBestillerEpost.Text != "" && txtBestillerNavn.Text != "" && txtBestillerPostKodeBy.Text != "" && ddKartTypeName.SelectedValue != "Velg KartType" && ddKartNummerName.SelectedValue != "Velg KartNummer" && tBestillingAntallKart1.Text != "")

View 1 Replies

Active Directory/LDAP :: Nested Groups Filter/create A Filter Which Will Return All The Users Which Belong To One Of The "kuku"s Group?

Mar 9, 2010

In my organization we use nested groups. For a particular usage, we have a group (let's assume that the group name "kuku"), and the names of all the nested groups under it contains "kuku" as well.

We may assume that no other group in the LDAP has "kuku" in the name.

I need to create a filter which will return all the users which belong to one of the "kuku"s group.

Obviously, using this filter will bring only the head kukus

(&(&(objectclass=user)(objectclass=person))(memberOf=CN=kuku,cn=...rest of the group DN...))

How can I use wild card to fetch all users which belong to any kuku?

For example: (&(&(objectclass=user)(objectclass=person))(memberOf=CN=.*kuku.*))

View 1 Replies

MVC Partial Class For Rule Validation

Jan 4, 2011

I have 2 projects. A data project, which contains my database and my Entity Framework model. I have table called 'User', and then have a generated EF class for user. I am trying to add a partial class:

using System;
using System.Collections.Generic;
using System.Data.Linq;
using System.Linq;
using System.Text;
namespace Data
{
public partial class user
{
public bool isValid
{
get {
return (GetRuleViolations().Count()==0);
}
}
public IEnumerable<RuleViolation> GetRuleViolations()
{
yield break;
}
partialvoid OnValidate(ChangeAction action)
{
if (isValid)
throw new ApplicationException("Rule violation prevents saving");
}
}
public class RuleViolation
{
public string ErrorMessage { get; private set; }
public string PropertyName { get; private set; }
public RuleViolation (string errorMessage)
{
ErrorMessage = errorMessage;
}
public RuleViolation(string errorMessage, string propertyName)
{
ErrorMessage = errorMessage;
PropertyName = propertyName;
}
}
}

This is following the MVC 1.0 NerdDinner example. However, I am getting a design time error on the OnValidate method:

partial void OnValidate(ChangeAction action)
{
if (isValid)
throw new ApplicationException("Rule violation prevents saving");
}

No definining declaration found for implimenting declaration of partial method 'void OnValidate(ChangeAction action)' What am I doing wrong?

View 1 Replies

MVC :: 2 - Dynamic View Content - Render A Page That Will Have Multiple Radio Button Groups As Well As Multiple CheckBoxes

Aug 4, 2010

I have an application that needs to render a page that will have multiple Radio Button Groups as well as multiple CheckBoxes. The desired layout is determined by a database table.

table structure:
PackageID uniqueidentifier
PackageName string
ItemName string
RadioGroupName string
ViewControlName string

This table defines a "Package". The "Package" can contain many different "Items" that require different controls used in the View. The "RadioGroupName" field is used to mark which RadioButtons should be grouped together. The "ViewControl" field marks which control should be used on the View to display the field. The query in my repository will return a result set such as

1 / "First Package" / "Item1" / "First Group" / "RadioButton"
2 / "First Package" / "Item2" / "First Group" / "RadioButton"
3 / "First Package" / "Item3" / "First Group" / "RadioButton"
4 / "First Package" / "Item4" / null / "CheckBox"
5 / "First Package" / "Item5" / null / "CheckBox"
6 / "First Package" / "Item6" / "Second Group" / "RadioButton"
7 / "First Package" / "Item7" / "Second Group" / "RadioButton"
8 / "First Package" / "Item8" / "Second Group" / "RadioButton"

Given this result set, I need to render the view as follows:

A RadioButton group with 3 options (Item1, Item2, Item3)
A CheckBox (Item4)
A CheckBox (Item5)
A RadioButton group with 3 options (Item6, Item7, Item8)

I have read that it is possible to use "if" conditions and looping structures inside the View. I have also read that this is a bad practice. Another issue I see is knowing which Item has been selected from each RadioButton group when I hit the Controller POST function. Previously I have built a page that has a single RadioButton group. My ViewModel was as follows:

[Code].........................

View 1 Replies

Validation Groups In Web Configure?

Mar 22, 2010

basically i have a page with the followingtextbox1 button1 and required field1 /validator callout1textbox2 button2 and required field2 /validator callout2button1 needs to only call validation controls1 and button2 needs to call validation controls2. how do i do this. I'm not really sure what to search for so any links to a tutorial/explanation

View 3 Replies

Validation On Blood Groups In Asp.net?

Feb 15, 2010

in my application i going to validate the blood groups, can u tell me how can i validate blood groups.

View 1 Replies

Web Forms :: Iterate Through Validation Groups?

Mar 31, 2010

I have a multi section form which the user can jump between sections to complete. Each section has its own validation group associated with it. I want to create a summary page which itterates through each of the validation groups and outputs if it is valid or not by changing an associated text.The problem that I am having is that once one validation group fails validation all subsequent sections also report as failing - presumably as the page.isvalid is still holding the fact that a previous group has failed

View 1 Replies

Web Forms :: How To Assing 2 Validation Groups To A Button

Feb 6, 2010

I thought I could assign more than 2 validation groups, separated by comma as follows.

<asp:Button ID="Button2" runat="server" Text="both v1 & v2 validate" ValidationGroup="v1, v2" onclick="Button2_Click"/>

but it didn't work.What i want to do is, when a user clicks button1, it only validates validation group"v1" When button2 is clicked, it validates both "v1" & "v2" validatino groups.
<asp:TextBox ID="TextBox1" runat="server" ValidationGroup="v1"/>
<asp:RequiredFieldValidator
ID="RequiredFieldValidator1" runat="server" ErrorMessage="*" ValidationGroup="v1" ControlToValidate="TextBox1"/> [code]....

this file is uploaded to http://zuke.us/espada/test1.aspx

View 9 Replies

Web Forms :: ConfirmButton Can Work With 2 Validation Groups

Apr 2, 2010

What I would like to do is to validate my aspx before showing the confirmation diaglog. After long hours of searching on the Net I came up with this:Some Validation controls with 2 different validation groups (ValidationGroup1 and NoValidation)ValidationSummary control is set to ValidationGroup1 with MessageBox=TrueButton1 is set to ValiationGroup1 (this button is hidden)Button2 is set to ValidationGroup1 with javascript onclick function to click button1.
ConfirmButtonExtender1 with TargetControlID=button1

View 4 Replies

Two Validation Groups In A Single Button Without Client Click Event

Feb 24, 2010

In a multigrid i have validating two controls like date and amount.it is validating correctly when i press the tabevent.when i press the save button it is not validating.iam using two validations gruops and two validation summary.Then in save button i have also tried onclientclick() function with javascript it s working fine but if i give the correct value in date and amount records not saving how to over come this.

Date: ' runat="server" CausesValidation="true"
ValidationGroup="group" Width="80px" AutoPostBack="true" OnTextChanged="txtDate_TextChanged">
Amount" ' CausesValidation="true"
ValidationGroup="req" runat="server" AutoPostBack="true">
validations summary: button save: OnClick="ButtonSave_Click" TabIndex="6" />

how to validate this in the button save also two popup box should be shown

View 1 Replies

ADO.NET :: How To Declare Multiple Groups In LINQ

Aug 17, 2010

How can I declare multiple groups in LINQ? I get this error "Range variable 'Group' is already declared." Error found in bold and underlined text below.

Dim SportsWear = From c in dbContext.SportsTable Group Join grp_Attire In dbContext.AttireTable On grp_Attire.AttireId Equals c.AttireId Into Group From sportsAttire In Group.DefaultIfEmpty() Group Join grp_SportType In dbContext.SportType On grp_SportType.TypeId Equals c.TypeId Into Group From sportsType In Group.DefaultIfEmpty() Select New With { _ .Attire = sportsAttire.AttireName,.Type = sportsType.TypeName}

View 1 Replies

Security :: Web.config Authorization Roles With Local Groups With Domain Groups In Them

Sep 29, 2010

I am "DomainMyDomainUserName" If I do this:

[Code]....

I can access the website I've created on my local machine in debug mode; and with my domain account as a local administrator, if I do this:

[Code]....

I can still access the website; and with my domain account in a Domain Group named "DomainDomainLocalSecurityGroup", if I do this:

[Code]....

I can still access the website; HOWEVER, if I create a Local Group on my machine named "LocalMachineGroup" and I add "DomainMyDomainUserName" to this group and I do this:

[Code]....

I get an Access Denied error trying to access the website. What I want to do is, have a group on my local machine (for testing), on a test web server, and on a production web server named "MyWebsiteUserAccess" with the same Domain Group (filled with Domain Users allowed access to the site) in all of these local groups; so that when I test the web application on my local machine, on my test web server and on my production web server, I don't have to change the Web.config file to have it work on each AND if the Domain Group name ever has to change, it won't affect access to the website.

What am I overlooking or is this even possible to do this way? I understand that there is a way to do Role Management through ASP.NET but I don't understand that well enough yet to implement that (and will probably go that route once I've done the research on how to best implement it for purpose of access control of this intranet site).

View 2 Replies

Enumerating Groups Using WindowsIdentity.GetCurrent() Returns Old Set Of Groups

Feb 1, 2011

I have a user that when I attempt to enumerate her groups using either System.Security.Principal.WindowsIdentity.GetCurrent().Groups on user's computer
or System.Web.HttpContext.Current.Request.LogonUserIdentity.Groups on the IIS server, I get a list of their old groups, not their new. I have checked the DC that they authenticate to and the ASP.NET page is running inside a SharePoint instance so the LogonUserIdentity most like is being provided from there Kerberos ticket.
Should I be looking up the groups directly from the AD instead of relying on the WindowsIdentity or LogonUserIdentity?

View 1 Replies

C# - Get Local Groups And Not The Primary Groups For A Domain User

Dec 18, 2010

i have a code to get the groups a user belongs to.

try
{
DirectoryEntry adRoot = new DirectoryEntry(string.Format("WinNT://{0}", Environment.UserDomainName));
DirectoryEntry user = adRoot.Children.Find(completeUserName, "User");
object obGroups = user.Invoke("Groups");
foreach (object ob in (IEnumerable)obGroups)
{
// Create object for each group.
DirectoryEntry obGpEntry = new DirectoryEntry(ob);
listOfMyWindowsGroups.Add(obGpEntry.Name);
}
return true;
}
catch (Exception ex)
{
new GUIUtility().LogMessageToFile("Error in getting User MachineGroups = " + ex);
return false;
}

the above code works fine when i have to find the groups of a local user but

for a domain user it returns a value "Domain User" which is kind of wierd as it is a part of 2 local groups.

Research

I did some finding and got that i am being returned the primary group of the domain user

called "Domain User" group

but what i actually want is the groups of the local machines the domain user is a part of... i cannot get that.. any suggestions

another code using LDAP

string domain = Environment.UserDomainName;
DirectoryEntry DE = new DirectoryEntry("LDAP://" + domain, null, null, AuthenticationTypes.Secure);
DirectorySearcher search = new DirectorySearcher();
search.SearchRoot = DE;
search.Filter = "(SAMAccountName=" + completeUserName + ")"; //Searches active directory for the login name
search.PropertiesToLoad.Add("displayName"); // Once found, get a list of Groups
try
{
SearchResult result = search.FindOne(); // Grab the records and assign them to result
if (result != null)
{
DirectoryEntry theUser = result.GetDirectoryEntry();
theUser.RefreshCache(new string[] { "tokenGroups" });
foreach (byte[] resultBytes in theUser.Properties["tokenGroups"])
{
System.Security.Principal.SecurityIdentifier mySID = new System.Security.Principal.SecurityIdentifier(resultBytes, 0);
DirectorySearcher sidSearcher = new DirectorySearcher();
sidSearcher.SearchRoot = DE;
sidSearcher.Filter = "(objectSid=" + mySID.Value + ")";
sidSearcher.PropertiesToLoad.Add("distinguishedName");
SearchResult sidResult = sidSearcher.FindOne();
if (sidResult != null)
{
listOfMyWindowsGroups.Add((string)sidResult.Properties["distinguishedName"][0]);
}
}
}
else
{
new GUIUtility().LogMessageToFile("no user found");
}
return true;
}
catch (Exception ex)
{
new GUIUtility().LogMessageToFile("Error obtaining group names: " + ex.Message + " Please contact your administrator."); // If an error occurs report it to the user.
return false;
}

this works too but i get the same result "Domain Users" . Please can some1 tell me how to get the local machine groups...?

View 2 Replies

MVC :: How To Permanently Redirect Url From Old Routing Rule To New Routing Rule

Nov 30, 2010

Response.RedirectPermanent(Url); can redirect permanently to a url.

However, during my SEO process, I decided to change my routhing rule.

For example,

I change "/tag/{tag}-quotes" routing rule to "quoes-about/{tag}", but I don't want to lose all the traffic to old routing url.

What is the best way to handle this permanent redirection?

View 4 Replies

C# - Column 'BID' Does Not Belong To Table Results

Feb 23, 2011

I'm populating a DataSet from an Sql query. I fetch some extra columns in my query as i need them to for further queries. I delete those columns after im' done with them, but i get a Column "columnname" doesn't exist in "dataset" error when i try to bind the DataSet to a GridView.

what could be the cause?

Edit: here's the code

The actual error message: "Column 'BID' does not belong to table results."

[code].....

View 3 Replies

C# - What Layer Does A UserControl's Base Class Belong

Aug 28, 2010

I have an asp.net usercontrol (ascx) that inherits from an abstract class (that inherits from a UserControl). My Project is in a 3-tier architecture (DAL -> Bll -> UI/Views). Currently there are no class files in the UI layer (other than the code-behinds). Which layer should I add this abstract class to?

View 2 Replies

DataSource Controls :: Column Does Not Belong To Table?

Jun 24, 2010

However has anyone ever seen a situation where, when you try to access the value of a column in a DataRow, you get the error "Column... does not belong to table.." when, in fact, it does?

The column name in question is called "ByWeight". I am wondering if either that, or maybe one of my other column names, is a reserved keyword and that's causing/masking this error.

If I look in the locals window and expand the DataRow, one of my columns is DBNull - by that I don't mean that the column value is DBNull, I mean the actual column itself is DBNull so it doesn't expand. I think there's a clue there.

View 1 Replies

Web Forms :: How To Validation Multiple Controls

Jan 28, 2011

I have 3 dropdownlists that contain dd mm and yyyy. Obviously, I need to test all 3 together to decide whether the date is valid or not - but how can this be done whilst outputting a single message "Please enter a day, year and month"?

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved