Some items don't have write access right due to workflow state write not being granted.When I click write access right in Access Viewer
Access Viewer informs me that selected user don't have access right due to workflowstate write acess right:
Unfortunately I'm not able to set it 'manualy' through security editor:
you could have a workflow which is used for the submission and tracking of tickets, with the scenario that when the support desk goes home all of the active workflows generate an e-mail to the person who submitted the ticket saying that their ticket won't be looked at today.What is the best approach to do this?Is it a custom activity or some other method of enumerating all of the active workflows and firing an event/queueing an item to the workflow queue Clearly from the workflow perspective it would be nice to have an activity within it which is fired when,in the case of the example above the office closes.
View 2 RepliesI know this is not the right place to post this question but I dont know where to go. My question is this.I have a statemachine workflow, this workflow works fine until a new requirement is came. The new requirement is to add a new state and event driven but this event driven is fired if the document library item is updated where the workfow is embedded. Is this posible? if so what event activity should I place?
View 7 RepliesThe client wants to see a graphical representation of the workflow. In addition (let's say it is a workflow for processing orders), the client wants to see at what point in the workflow any given order is, indicated on the graphical workflow representation by a highlighted node or some visual queue.
All of this must be available via a web interface.
Was hoping somebody had some bright ideas for how to achieve this without writing extensive custom controls.
Does Workflow Foundation 4 offer anything itself that would assist toward this end?
I am new to workflow and just know some of its features. I want to do a project in WF. It will be a web based intranet application where user will be able to define workflow dynamically through web interface.Duration for completing a task can be many days.With these requirments I am not sure will use of WF helpful in quick development or it will increase work ?Please advice me should I try to learn WF for this project or should do it with C# and asp.net
View 1 RepliesI have a list with 2 sorts of items. Items that have actual values (1,2,3,4 etc) and items that are like group headings so all their values are set to 0. If someone decides to select a group heading - which has a value of 0, is it possible to redirect them to my 'Select an item' item which has a value of ""?
If worse comes to worse, I can just reconstruct the entire list, although if possible I'd like to avoid it.
I have a project that queries a set of times from a database and uses these entries to populate a dropdownlist. Once the page is loaded, the user can select one of the items in the DropDownList. When the "Save" button is clicked, the Selected item value is returned to the [HttpPost] version of the controller action. This item is then stored into session. If the system returns to the page containing the dropdown, I want the saved Value to be selected in the DropDownList. What actually happens is that the DropDownList is always set to be the first item in the list.
Database Table: This data has been imported using Link to SQL
[code]....
I bind dropdownlist in my page
protected void Page_Load(object sender, EventArgs e) {
BindDropDownList(DDL1, "city1", "name", "ID");
DDL1.Items.Insert(0, new ListItem("select city", "0"));
}
And SP
LTER procedure [dbo].[city1]
as
begin
select id,Name
from city
end
And design code
<asp:DropDownList ID="DDL2" runat="server" CssClass="daddsd">
</asp:DropDownList>
And here is imagebutton code that when click on it update data into table
protected void ImageButton_Click1(object sender, ImageClickEventArgs e) {
string data = Server.UrlDecode(Request.QueryString["BehCode2"]);
SqlCommand _cmd = new SqlCommand("insertinfo", _cn);
_cmd.CommandType = CommandType.StoredProcedure;
_cn.Open();
[Code] ....
Here when i click on button it insert all data into table but it didn't insert my selected item from dropdownlist it insert select city that i define in page_load
DDL1.Items.Insert(0, new ListItem("select city", "0"));
And when i delete this code from page load it insert in table first row of my table it didn't insert my selected item from dropdown list.
I am trying to get a drop down and a form view to work together. I've never used form views before. I also am using the entity framework to do everything. This is also my first time with it.
I want to be able to have a drop down, that is populate from the same data source as the form view. So far that works fine.
I then want to be able to change the drop down item, and it change the form view item that is displayed. I cannot figure out how to make this work.
i use a dropdownlist in a page, with its items taken from a mysql database
i also use autopostback property...my problem here is that, every time i selecct an item, the first item in the list gets seelected
How to get the selected item from the listbox in the selected index changed event. I tried: Label1.Text = ListBox1.SelectedItem.Text; It is giving me object set to null reference.
foreach (ListItem item in ListBox1.Items)
{
if (item.Selected)
{
//lblResults.Text += item.Text + "
";
Label1.Text = item.Text;
}
}
No use, no value coming in to label.
I have a drop down list control populated with items and some code to take the currently selected item value. The problem is I only get the value of the first item in the list regardless of what item is actually selected. Here is my code to populate the drop down:
protected void displayCreateCategories()
{
StoreDataContext db = new StoreDataContext();
var a = from c in db.Categories
orderby c.Name
select new{catName= c.Name,
catId=c.CategoryID};
ddlCategory.DataSource = a;
ddlCategory.DataTextField = "catName";
ddlCategory.DataValueField = "catId";
ddlCategory.DataBind();
}
To get the value of the currently selected item which in my case is always of type integer I do label1.text=Convert.toInt32(ddlCategory.SelectedValue); I get the selected value, but it is always for the 1st item in the list. I'm pulling my hair out over this.
i have an application wherein i am accessing the Session object in the CommonCode.cs file that resides in the App_Code folder. But when the session object is accessed the application throws me an error Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the \ section in the application configuration.Now i have already enabled the session state property in the web.config file, here is my code from the web.config file:
[code]...
I have a web page with paypal. In the page user add items to list then buy it. when user add item to list i block that item in stock until user buy or delete that item.Now my problem is when user add item in the list and then close the broswer from IE close button , the item get blocked. I want to rollback the added items when user close the browser from IE button.
View 2 RepliesI have a couple of dropdownlists and a button.when a user selects an item in the 1st dropdownlist,the 2nd dropdown is programmatically bound to a set of items(using an ajax request) depending on the value selected in the 1st dropdown.Then the user will have the ability to choose an item from the 2nd dropdown and click on the button,which performs some server side opeartions and returns the results.
But if the user tries to click on the button before the 2nd dropdown list is populated,user will receive an exception message.Instead of that I would like to prevent the user from clicking the button before the ajax request is completed to populate the 2nd dropdown.I tried using Button1.Enabled=false in the selectedvaluechanged event of 1st dropdown,which does n't seem to work.
I have a dropdown list for the which values are coming from DB. There is one option name OTHER, when I select other the textbox appears. For that Textbox I have made a required field validator. Till here it works fine. But when I select any other option, still it gives me validator errors. It should not happen. It should only give me required field error when the user doesn't fills the textbox on select of OTHER option. Please see the code.
Dropdown and Textbox code:-
<asp:DropDownList ID="ddlGraduation" runat="server" CssClass="txtfld-popup_drp"></asp:DropDownList>
<asp:RequiredFieldValidator CssClass="error_msg" ID="reqGraduation" runat="server" ControlToValidate="ddlGraduation"
ErrorMessage="Please select graduation details" InitialValue="--Select--" SetFocusOnError="true"></asp:RequiredFieldValidator>
<asp:TextBox ID="txtOther" runat="server" CssClass="txtfld-popup_p"></asp:TextBox>
<asp:RequiredFieldValidator ID="reqOther" runat="server" ControlToValidate="txtOther" ErrorMessage="Please specify your qualification"></asp:RequiredFieldValidator>
JS code for hiding and show the textbox when user select and deselect the OTHER option from dropdown list:-
<script language="javascript" type="text/javascript">
function pageLoad() {
$('#ctl00_ContentPlaceHolder1_txtOther').hide();
$('#ctl00_ContentPlaceHolder1_ddlGraduation').change(function () {
if ($(this).val() === "Other") {
[Code] .....
How to achieve this...
I've a Gridview control using an ODS(ObjectDataSource) to fetch data. For the best performance and efficiency, I've turned-off the view state of Gridview (i.e. EnableViewstate = "false".And I've also enabled caching in the associated Objectdatasource. This eliminates as much as 50-60% performance optimization because it eliminates the DB round-trip .. courtesy ODS Caching.So, after this I got stuck into the famous "ODS sorting" issue but I managed to invent a tricky solution for it and its working fine
View 4 Replies![<asp:RadioButtonList ID="RdoBtnHasNotified" runat="server" RepeatDirection="Horizontal" AutoPostBack="True" OnSelectedIndexChanged="RdoBtnHasNotified_SelectedIndexChanged">
<asp:ListItem Value="1">Yes</asp:ListItem>
[code]...
I have a Gridview that has a button at the left hand side representing the row number. The Gridview has two textboxes and a dropdown listbox as templates. I would like to enable or disable the textboxes and the dropdown listbox if the row is not selected. I also need to enable or disable the templates depending on what the value is of one of the cells. When the templates are changed, I need to save the changes.
I have been able to get this working in the RowDataBound Sub but not in the RowCommand Sub when the row is selected. provide an example in VB.My current RowDataBoundSub, which does no work is below:
Protected Sub PropGrid_RowCommand(ByVal sender As Object, _
ByVal e As System.Web.UI.WebControls.GridViewCommandEventArgs) Handles PropGrid.RowCommand[code]....
My current RowDataBound Sub, which is working is below:
Protected Sub PropGrid_RowDataBound(ByVal sender As Object, _
ByVal e As System.Web.UI.WebControls.GridViewRowEventArgs) Handles PropGrid.RowDataBound [code]....
I am trying to keep a button disabled unless a row in my gridview has been selected. If I just keep the button disabled, I cannot ever get it re-enabled.I am assuming I need some javascript to enable it when a row is selected.
View 5 RepliesI have a dropdownlist ,three text boxes and a submit button.The three text boxes are disabled and enabled based on the condition in dropdownlist.I have provided required field validators in three text boxes.When I click on condition "self" then three text boxees are disabled and submit button click wont enter the values since required field validators prevent that.I have set causes validation property to false.But it wont work for the second condition where i need to enable all the textboxes,If i didnt provide any values it will enter nulll values to db.
View 1 RepliesI'm using a gridview rows, in that I'm adding the rows. I need to disable the textboxes based upon the selected value from the dropdownlist (Yes / No). This should be remain same for the previous rows when ever I'm adding new rows.
View 1 Repliescode for read write cookies in asp.net?
View 1 Repliesthis is performance related question. i have gridview and i wrote gridview selected index changing event .In that event i am enable and disable one button out side the gridview..
it is working fine and fast in my local system ..the problem is ,if i upload my application in server ,it takes more time to perform action in gridview selected index changing.how to avoid that problem ?
I tried <%= request.cookies("cookiename").expires %> but thats a no go. Tried adding .tostring, no go. what am I to do? Has to be something simple I am missing here.
View 6 Replies