in a page of my asp.net mvc website jquery not worked. when i test the html source then i see the jquery script is not writtenonly one master page to load all jquery on every page .so where my jquery. when i debug my jquery then error found $ is not definedoff course it come because jquery not load
Split view and design view doesn't work.I installed and uninstalled Office 2003 and 2007 once but there's no office in my computer now.-I have Microsoft Studio Web Authoring Component installed.(12.0.4518.1066)(Uninstalled and installed it twice)-My computer-properties-Advenced system settings-environment variables-system variables-path is;
[code]... What is the problem,how can i fix it? I tried everything in other posts.
I'm currently developing a web application where everything works fine in the visual studio web server. It authenticates the user, access the database, writes to it, etc.
After I wrestled yesterday to publish it to my local iis, a subject I admit I have little to no experience of doing, suddenly the membership of the website started to not authenticate the users.
At first I suspected maybe the app wasn't accessing SQLServer, or that the data with the users I had in the asp.net membership database was erased when I uploaded the website.
So I stopped iis, i attached the db file to my local sql server, and I can see that all the users are there just like I uploaded them. I also can see the website can access another database with micellaneous contents just fine.
The loging controls don't tell me there's any problem either, they just show a message telling the user that the login attempt wasn't successful.
So, here's what I remember I did to make the app work as it wasn't even doing that when I first uploaded it.
I used the asp.net_regiis tool to copy website scripts to the website.
aspnet_regiis -sn <path>
then I deleted the website, uploaded again from VS. this time it shows in the browser but it doesn't authenticate the users.
The application isn't precompiled, I just uploaded it.
I have the following class that I have all my controllers inherit from:
[Code]....
I would like to aways redirect to the login page where // this isn't workingThe current code runs, but it still allows access to the views that I want to block when the user isn't logged in
i was using normal ajax extention in VS2008. then i read features of ajaxcontroltoolkit and i felt that by using my load of work will be lessend so i used ajaxcontroltoolkit in web application,before using ajaxcontroltoolkit i was using this code
I'm curious why the intellisense feature isn't available in the source view for the mark up. It would be nice if while you are typing something similar to the following could happen. While setting a property such as the DataSourceID that it would bring up the possible data sources that already defined on the page.
i created a "create" view for creating a new record of my used model. The View includes partial views with the editor-fields. But the "Create" submit button doesn't work. When i copy the editor-fields to the create view without using partial views the submit button works. Here is my code: Create.cshtml
I use in my application 2 areas: Website and Admin. I will put all controllers and views in these areas, not in root application. So I would like to have default route 'Website/Mycontroller/Myaction', not 'Mycontroller/Myaction'. I have changed Global.asax.cs:
[Code]....
to: [Code]....
but now my application doesn't work when I open website http://xxxxxx.pl.
I have a JQuery select component and a javascript function to handle the stop event:
[code]....
The script works fine in firefox and chrome but not in IE7/8. It is normally supposed to send a string to the openid_identifier textbox once the google or yahoo select box is clicked.
and on change of this dropdownlist i check if the its text equal to a string i show the 2 tr as below
function ValidateCity() { if ($('#<%= citiesDropDownList.ClientID %> :selected').text() == identity_CityOther) { $('#<%= otherCityTR.ClientID %>').show(); $('#<%= areasTR.ClientID %>').show(); } var city = $('#<%= citiesDropDownList.ClientID %>').val(); return IsValid((city.length != 0), '#<%= cityDiv.ClientID %>', identity_CityRequired); }
.show() isn't work at all and i don't the reason .. can any lead me to get the problem?
FYI : I tried $('#<%= otherCityTR.ClientID %>').show('slow'); and also $('#<%= otherCityTR.ClientID %>').css('visibility', 'visible'); but it doesn't work also.
The problem is, the binding '<%= JOB_CODETextBox.ClientID %>' doesn't work, it returns the same binding expression after renderign instead of replace it with the actual client id!
I have been trying really hard to activate and launch a COM object using an ASP.NET web application. The aspx website has a code-behind file that has a reference to this COM object (which is an actual application -a CAD software). When required, the VB code creates (or launches) the application.
The complete set-up works in a Win-XP (32-bit) environment both under debugging using visual studio and when the website is accessed by an outside user (through IIS server in XP). But the same application doesn't get activated when it is hosted onto the Win-2003 (32-bit) IIS server. I get "Object reference not set to an instance of an object" error.
The way I have setup in Win-XP was to grant ASP user and Internet guest user permissions to the COM object in the DCOM Config and since the windows firewall is enabled, I add the exe file (associated with the COM object) to the exception list. For the case of Win-2003 server, I add the Network Service permission to the COM object. But the setup doesn't seem to work at all. I am not sure what I am missing and how to get the application to launch.
I have a small problem, I have a page which 4 jQuery modal popups. everything works fine, all the popup comes up however when i click on the button inside the jQuery popup nothing happens. I cannot figure out why.
When Page_Load is running the first time, I set Image 1.jpg to the HTML control with sucess!When Page_Load is running the second time, the Image 2.jpg is Not set to the same HTML control?This even that it should though I use a MessageBox to se that the C# code is running that should set 2.jpg to the control
I have a little problem with my sliding panels, I have a Page with 2 sliding panels (right and left). These panels have a 'slide button' and you can reduce panels by clicking on it. I use cookies to record state of panel, so when you change page panels stay collapsed or extended. But it doesn't work very well, in fact the state is recorded for the page. If I change page, panel will extend (default position) but if I go back on the page it will disapear. Is it possible to ignore the path in the cookie and use a cookie for all website? Jquery code :
$('#rightfold').click(function () { if ($('.menudroite').is(':visible')) { $('.menudroite').hide("slide", { direction: "right" }, 400); $.cookie('rightfold', 'collapsed'); $('.triggerdroite').animate({ backgroundColor: "#B2C9D1" }, 1000); $('#rightfold').animate({ color: "#000000" }, 1000); } else { $('.menudroite').show("slide", { direction: "right" }, 400); $.cookie('rightfold', 'extended'); $('.triggerdroite').animate({ backgroundColor: "#6c7a7f" }, 1000); $('#rightfold').animate({ color: "#d9f4ff" }, 1000); } }); $('#leftfold').click(function () { if ($('.menugauche').is(':visible')) { $('.menugauche').hide("slide", { direction: "left" }, 400); $.cookie('leftfold', 'collapsed'); $('.triggergauche').animate({ backgroundColor: "#B2C9D1" }, 1000); $('#leftfold').animate({ color: "#000000" }, 1000); } else { $('.menugauche').show("slide", { direction: "left" }, 400); $.cookie('leftfold', 'extended'); $('.triggergauche').animate({ backgroundColor: "#6c7a7f" }, 1000); $('#leftfold').animate({ color: "#d9f4ff" }, 1000); } }); // COOKIES var leftfold = $.cookie('leftfold'); var rightfold = $.cookie('rightfold'); // Set the user's selection for the left column if (leftfold == 'collapsed') { $('.menugauche').css("display", "none"); }; // Set the user's selection for the right column if (rightfold == 'collapsed') { $('.menudroite').css("display", "none"); };
I am drawing a grid using HTML and each tr element has it's own id. I want to be able to remove a tr on a button click, but not have to redraw the whole grid to show that the row has been deleted. I can do this using .hide(), but the problem is that I need to call a function to stripe my rows after, and since the row is still considered there, the striping doesn't work properly.
I've added routes to my asp.net 4 website so that, for example the page: "~/Main/About/Careers.aspx" is mapped to the url: [URL] I'm using jquery to make an ajax call and it simply does not work after I've added the routing, I used the following code, and it remains stuck on the spinner image:
I'm trying to generate jquery vertical tabs using jquery template. I use this code :
[Code]....
Everything works greate on Firefox, Chrome, Opera and Safari but in IE this code doesn't work. When i looked on html source i saw that in IE instead on
[Code]....
I get
[Code]....
Because of this jqury vertical tabs doesn't work on IE.
I created a .NET user control to work as a DropdownCheckbox and added Jquery to give the sliding and hide effects. The code is as below:
[Code]....
This control works fine in a normal page, but once I put it inside an update panel it doesn't work. Is there a work around or simply I can't use JQuery inside update panel?
I wrote a asp.net website with Jquery. I was using it to post and get data's from the Sql Server database with Generic Handlers (.ashx). I also used Jquery Autocomplete plugin. Everything I wrote works just fine in the computer that I use. Then my company wanted to deploy the website to their server. When they run the website on that computer everything works fine including autocompletion but one part that i wrote doesn't function. I used in javascript code $.post and $.get functions and not working properly i guess... It works on my computer and i double checked the connection strings in the other computer to make sure that it is not a database problem. I couldn't find a solution. I am not allowed to give the codes in my company so i need to ask that may that be the cause of version of jquery i use? Does it vary depends on it? Because the computers that i tried to run the applications have different versions of internet explorer. Or I know it is nearly impossible but may jquery corrupt on changing of computers ?. I tried everything but I couldn't find a solution. The thing that confuses me is the autocomplete plugin of Jquery works just fine. The version of Jquery that i use is 1.2.6 and I use .NET Framework 2.0.
It worked just fine untill this week, but now it fails to login.
the odd think is that it do login from localhost, but when trying to login through the profuction site it fails to login. this is happens to all users.
everytime the user selects a date from my datepicker the for some reason instead of staying focused on the are the date picker is in it scrolls to the top of the page.
Heres the function located at the bottom of my asp.net page under the
and also on postback my datepickers stop working. For example i have a dropdownlist that causes postback and if the user uses the drop downlist then the datepickers stop working
