I've added routes to my asp.net 4 website so that, for example the page: "~/Main/About/Careers.aspx" is mapped to the url: [URL] I'm using jquery to make an ajax call and it simply does not work after I've added the routing, I used the following code, and it remains stuck on the spinner image:
[Code]....
i'm experiencing some weird problem and cannot find any solution on how to fix it.... i have this function where user can update their email address, password etc. i put all this into an accordion. all works perfectly fine until i added in some validation. the validation works fine to. the problem is, now none of my button works. as in it does not trigger any action..
below are my codes
[Code]....
[Code]....
I created a .NET user control to work as a DropdownCheckbox and added Jquery to give the sliding and hide effects. The code is as below:
[Code]....
This control works fine in a normal page, but once I put it inside an update panel it doesn't work. Is there a work around or simply I can't use JQuery inside update panel?
I am porting my simple Role Based Auth to ASP.NET. It requires this check on each page:
[Code]....
If put in each page's OnLoad, it works fine. But when I add it to the masterpage, it doesn't work. Is there something about the ServerVariables or Session Object that would prevent using those in a masterpage? Is it an issue calling my class from a materpage?
i'm trying to make this work for several days but it just doesn't work.
this is my code:
aspx page:
[Code]....
webservice:
[Code]....
this was downloaded from this website.
the problem is that the page loads fine but no autocomplete occurs.
in a page of my asp.net mvc website jquery not worked. when i test the html source then i see the jquery script is not writtenonly one master page to load all jquery on every page .so where my jquery. when i debug my jquery then error found $ is not definedoff course it come because jquery not load
<script type="text/javascript" src="http://www.google.com/jsapi"></script>
<script type="text/javascript">
google.load("jquery", "1.4.2");
google.load("jqueryui", "1.8.0");
</script>
<script language="javascript" type="text/javascript">
$(function () {
[code]...
Given:
<input id="datepicker" type="text" />
Where the id = datepicker tells the javascript to attach all the datepicker code to the form element, how do I turn this into a server control?
For example:
<input runat="server" id="datepicker" type="text" />
Doesn't work because ASP.net generates it's own ID's.
Edit
<asp:TextBox runat="server" ID="dateTo" class="datepicker"></asp:TextBox>
Renders as
<input name="ctl00$mainContent$dateTo" type="text" id="ctl00_mainContent_dateTo" class="datepicker" />
And doesn't work!
I am a new to WCF. I have written ajax to use a web service before, but on this project I am trying to use ajax to WCF.After I build the project and wcf using ajax, I receive the return successfully. But, 10 or more minutes later I don't get a return, the ajax calls the error function, and the fiddler returns nothing.
If I rebuild the project without any source modifying, I receive the return successfully again.
I have a JQuery select component and a javascript function to handle the stop event:
[code]....
The script works fine in firefox and chrome but not in IE7/8. It is normally supposed to send a string to the openid_identifier textbox once the google or yahoo select box is clicked.
I have 2 html TR that i make them runat="server" & visible="false" and I have a dropdownlist called citiesDropDownList
$(document).ready(function() {
$('#<%=citiesDropDownList.ClientID %>').change(function() { ValidateCity(); });
});
and on change of this dropdownlist i check if the its text equal to a string i show the 2 tr as below
function ValidateCity() {
if ($('#<%= citiesDropDownList.ClientID %> :selected').text() == identity_CityOther) {
$('#<%= otherCityTR.ClientID %>').show();
$('#<%= areasTR.ClientID %>').show();
}
var city = $('#<%= citiesDropDownList.ClientID %>').val();
return IsValid((city.length != 0), '#<%= cityDiv.ClientID %>', identity_CityRequired);
}
.show() isn't work at all and i don't the reason .. can any lead me to get the problem?
FYI : I tried $('#<%= otherCityTR.ClientID %>').show('slow'); and also $('#<%= otherCityTR.ClientID %>').css('visibility', 'visible'); but it doesn't work also.
I have user control with one textbox on it and i want to apply datepicker to.
here is the code of mycontrol.ascx
[Code]....
If I click inside text box control the datepicker doesent shows.
If I use the same code for showing datepicker on webform it works. Why? Do I miss something or I need something to add on my control?
I am calling a jquery function after inserting a record to database...
[code]....
But it doesn't seem to work...
I have the following code:
<input type="text" ID="JOB_CODETextBox" runat="server" value='<%# Eval("JOB_CODE") %>' readonly="readonly"
onclick="$('#basic-modal-content').modal(
{
appendTo:'form', persist: true,
onClose: function (dialog)
{
document.findElementById('<%= JOB_CODETextBox.ClientID %>').value = 'value';
$.modal.close();
}
} );" />
The problem is, the binding '<%= JOB_CODETextBox.ClientID %>' doesn't work, it returns the same binding expression after renderign instead of replace it with the actual client id!
I have a small problem, I have a page which 4 jQuery modal popups. everything works fine, all the popup comes up however when i click on the button inside the jQuery popup nothing happens. I cannot figure out why.
This is the jQuery code i used [URL]:-
[Code]....
When Page_Load is running the first time, I set Image 1.jpg to the HTML control with sucess!When Page_Load is running the second time, the Image 2.jpg is Not set to the same HTML control?This even that it should though I use a MessageBox to se that the C# code is running that should set 2.jpg to the control
View 2 RepliesI have a little problem with my sliding panels, I have a Page with 2 sliding panels (right and left). These panels have a 'slide button' and you can reduce panels by clicking on it. I use cookies to record state of panel, so when you change page panels stay collapsed or extended. But it doesn't work very well, in fact the state is recorded for the page. If I change page, panel will extend (default position) but if I go back on the page it will disapear. Is it possible to ignore the path in the cookie and use a cookie for all website?
Jquery code :
$('#rightfold').click(function () {
if ($('.menudroite').is(':visible')) {
$('.menudroite').hide("slide", { direction: "right" }, 400);
$.cookie('rightfold', 'collapsed');
$('.triggerdroite').animate({ backgroundColor: "#B2C9D1" }, 1000);
$('#rightfold').animate({ color: "#000000" }, 1000);
}
else {
$('.menudroite').show("slide", { direction: "right" }, 400);
$.cookie('rightfold', 'extended');
$('.triggerdroite').animate({ backgroundColor: "#6c7a7f" }, 1000);
$('#rightfold').animate({ color: "#d9f4ff" }, 1000);
}
});
$('#leftfold').click(function () {
if ($('.menugauche').is(':visible')) {
$('.menugauche').hide("slide", { direction: "left" }, 400);
$.cookie('leftfold', 'collapsed');
$('.triggergauche').animate({ backgroundColor: "#B2C9D1" }, 1000);
$('#leftfold').animate({ color: "#000000" }, 1000);
}
else {
$('.menugauche').show("slide", { direction: "left" }, 400);
$.cookie('leftfold', 'extended');
$('.triggergauche').animate({ backgroundColor: "#6c7a7f" }, 1000);
$('#leftfold').animate({ color: "#d9f4ff" }, 1000);
}
});
// COOKIES
var leftfold = $.cookie('leftfold');
var rightfold = $.cookie('rightfold');
// Set the user's selection for the left column
if (leftfold == 'collapsed') {
$('.menugauche').css("display", "none");
};
// Set the user's selection for the right column
if (rightfold == 'collapsed') {
$('.menudroite').css("display", "none");
};
I am drawing a grid using HTML and each tr element has it's own id. I want to be able to remove a tr on a button click, but not have to redraw the whole grid to show that the row has been deleted. I can do this using .hide(), but the problem is that I need to call a function to stripe my rows after, and since the row is still considered there, the striping doesn't work properly.
View 3 RepliesWe are working on a project which has lots of routes that can be changed on-the-fly or new routes can be added dynamically. What are the best practices about managing lots of routes and adding routes on-the-fly without recompiling? Reading-Writing from-to database or from Xml Document in Application_Start?
View 4 RepliesI'm trying to generate jquery vertical tabs using jquery template. I use this code :
[Code]....
Everything works greate on Firefox, Chrome, Opera and Safari but in IE this code doesn't work. When i looked on html source i saw that in IE instead on
[Code]....
I get
[Code]....
Because of this jqury vertical tabs doesn't work on IE.
I have the following routes setup in my route config file. I have a config reader that maps these to MVC-style routes.
[route name="customers" url="customers/{statename}/{marketname}/{pagenumber}"]
[controller name="Customers" action="Display" //route]
[route name="pcustomers" url="{customername}/customers/{statename}/{marketname}/{pagenumber}"]
[code]...
Im looking on some routes.MapPageRoutes but i cant get it to work.
I have these link
ROOT
default..aspx
brands.aspx
service.aspx
contact.aspx
aboutus.aspx
shopping.aspx
ALL these pages is running with a masterpage
eb.master (also in the root)
And then i have the global file that have the namespace in the global file also.when im running the pages/website and i have the default.aspx page activ, it show
www.mydomain.dk/default.aspx
when i wanted it to be
www.mydomain.dk/Butikken
Its the same problem with the others routes....
Code:
<%@ Application Language="VB" %>
<%@ Import Namespace="System.Web.Routing" %>
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
[Code].....
I am developing web application and in application i need to make call of jQuery using .ajax(); method with datatype is set jsonp. Now all works well with limited data but problem start to occur when data size is increasing......
View 7 RepliesI have this code being called
[Code]....
which returns <div>here</div><script language=javascript>alert('');</script> The content gets loaded property, but no alert. How would I get a javascript routine to work from an ajax call along with posting the HTML code?
I'm getting the following error on deployment of a tested application where ajax runs fine on the developmental system On deployment, I'm running asp 4. I downloaded ajax4 and extracted it into the /program files/ajax folder. Do I need to register any .dlls or anything? I don't see that in the Ajax installation instructions.
Server Error in '/' Application.
Parser Error
Description:
An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
here is the functionality which works in IE browser but not on firefox and chrome. I'm using
ModalPopUpExender.