I have a questions..
when initially page load I have two radio button in the page..
Add
Edit
when I select Add radio button I need to go the controller Action Add
$("#Add").change(function () {
// what should I write here to hit the controller?
});
Using jQuery I want to be able to click an element which will also checks it's related radio button. I had this working fine until we had to add runat="server" to the radio buttons.When I apply this it prevents my jQuery function from working how to get round it, heres a simplified version of the code:HTML
<input type="radio" runat="server" id="sector1Radio" name="SectorGroup" title="Sector1" />
jQuery
$('#SomethingElse').click(function() {
$('input[title=Sector1]').attr('checked','checked');
});
I've found out that when its converted to a .net control instead of checked="checked" (as it would be usually) it is just Checked, so I changed that but on inspecting the DOM in multiple browsers, none of my radio buttons are being checked(Are there any other ways I can use jQuery to check a radio button that has runat="server"?
I'm fairly new to MVC and admittedly don't fully understand how data is passed between Views and Controllers. That said, here is my issue.
I am working with C#. I have a page which has a list of items. Each item has a radio button set of three associated with it and there are 15 of these sets on the page. Thus I have radio1, radio2....radio15, etc. Each of these has value 0, 1, or 2 upon submit. I can't seem to understand how to get the information out of these radio button sets from the controller without passing 15 different variables to the post method in the controller which is associated with the view; ie passing Int32 radio1, Int32
radio2,.., Int32 radio15, etc.
I tried using ViewData["radio"+i] in a loop to access the value of each radio button set, but this, apparently can only be used to pass data to the View from the Controller and not the other way around.
I was trying to design a web page using radiobuttons and images. I have 3 radiobuttons(Tiger , elephant, Imphala) and 3 images of those animals.
Now I need to display only tiger when i check tiger. and only elephant when i check elephant. I have put all 3 radiobuttons in one group name and enabled Autopostback.
i need to write in the RadioChanged event handler.
i have a radio button list in my code
[URL]
I also have a label jsut below this
<asp:Label ID="LabelCarrierCode" runat="server" Text="Select Carrier Code" Width="163px" Visible="False"></asp:Label>
What I want is to change the label text if the user selects the second radio button i have tried doing this but it does not works
[code]....
I have 5 checkboxes in my form is there a way to make them work like radio buttons using jquery.
View 2 RepliesI'm trying to add a css class to the parent div of my radio button if it is checked. Then remove if it is not checked. Using onfocus and onblur won't work on radio buttons for some reason. I also want to achieve this without specifying any type of id or name, just by the html control of 'input'.
Here's what I came up with in jquery:
[Code]....
And the html:
[Code]....
I have 3 master pages with names master1.master, master2.master and master3.master and a webpage named as home.aspx how can i change my master pages to inherit with home.aspx using radio button linst.
View 3 RepliesI had a simple working (ASP.NET) Scenario here: 3 asp:RadioButtons that each have OnCheckedChanged event that will update an asp:gridview. But now, I want to put some description for each radiobutton selection,and I thought it would be a good idea to embed them in JQuery UI Tabs like the following :
<div id="tabs">
<ul>
<li><a href="#tabs-1">
<asp:RadioButton ID="RadioButton1" runat="server" Text="option1" Checked="True"
AutoPostBack="True" OnCheckedChanged="RadioButton_CheckedChanged" /> </a></li>
<li><a href="#tabs-2">
<asp:RadioButton ID="RadioButton2" runat="server" Text="option2"
AutoPostBack="True" OnCheckedChanged="RadioButton_CheckedChanged" /></a></li>
<li><a href="#tabs-3">
<asp:RadioButton ID="RadioButton3" runat="server" Text="option3"
AutoPostBack="True" OnCheckedChanged="RadioButton_CheckedChanged" /></a></li>
</ul>
<div id="tabs-1"> <p> content1</p> </div>
<div id="tabs-2"> <p> content2</p> </div>
<div id="tabs-3"> <p> content3</p> </div>
</div>
and the jquery is
<script type="text/javascript">
$(function() {
$("#tabs").tabs();
});
</script>
I want the corresponding radiobuttons for each tabs be selected after switching to that tab (by clicking anywhere inside that tab) I don't know how to that probably by JQuery or JavaScript
Generated HTML source :
<div id="tabs" class="ui-tabs ui-widget ui-widget-content ui-corner-all">
<ul class="ui-tabs-nav ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all">
<li class="ui-state-default ui-corner-top ui-tabs-selected ui-state-active"><a href="#tabs-1">
<input type="radio" checked="checked" value="RadioButtonCart" name="ctl00$ContentPlaceHolder1$g2" id="ctl00_ContentPlaceHolder1_RadioButtonCart"/><label for="ctl00_ContentPlaceHolder1_RadioButtonCart">option1</label></a></li>
<li class="ui-state-default ui-corner-top"><a href="#tabs-2">
<span style="color: Green;"><input type="radio" onclick="javascript:setTimeout('__doPostBack('ctl00$ContentPlaceHolder1$RadioButtonShetab','')', 0)" value="RadioButtonShetab" name="ctl00$ContentPlaceHolder1$g2" id="ctl00_ContentPlaceHolder1_RadioButtonShetab"/><label for="ctl00_ContentPlaceHolder1_RadioButtonShetab">option2</label></span></a></li>
<li class="ui-state-default ui-corner-top"><a href="#tabs-3">
<input type="radio" onclick="javascript:setTimeout('__doPostBack('ctl00$ContentPlaceHolder1$RadioButtonFish','')', 0)" value="RadioButtonFish" name="ctl00$ContentPlaceHolder1$g2" id="ctl00_ContentPlaceHolder1_RadioButtonFish"/><label for="ctl00_ContentPlaceHolder1_RadioButtonFish">option3</label></a></li>
</ul>
<div id="tabs-1" class="ui-tabs-panel ui-widget-content ui-corner-bottom">
<p> content1</p>
</div>
<div id="tabs-2" class="ui-tabs-panel ui-widget-content ui-corner-bottom ui-tabs-hide">
<p> content2 </p>
</div>
<div id="tabs-3" class="ui-tabs-panel ui-widget-content ui-corner-bottom ui-tabs-hide">
<p> content3 </p>
</div>
</div>
I solved 2 problems with adding ids to anchors like id="tabsA-1" and simulating the postback for
OnCheckedChanged="RadioButton_CheckedChanged" with $("#aspnetForm").submit();
<script type="text/javascript">
$(document).ready(function() {
$("#tabsA-1").click(function() {
$("#<%=RadioButtonCart.ClientID %>").attr("checked", "checked");
$("#aspnetForm").submit();
});
});
</script>
I just have to find a way to select the right tab after postback and my problem is solved.
<script type="text/javascript">
$(function() {
var $tabs = $("#tabs").tabs();
$tabs.tabs('select', '<%= selectedTabIndex %>');
});
</script>
which selectedTabIndex is a public string var in code_behind and i update its value in page_load. one funny problem was that the .tabs( 'select' , index ) in JQuery is not zero-based index of the tab as the official site said and it start from 1.
I'm having a time finding out I could not do something simple as :
On the onchange event getting the new selected checkbox, this with jquery.
The checkboxes are located in the following div :
[Code]....
This all located in a form, when I will find out the selected radio on change I will post the form and use the value of the hidden field to know the selected radio button. Nothing really difficult.
The js code :
[Code]....
I've two radio buttons in my web site for selecting sex, one s for Male & another s for Female, Problem is during the Run time, I was able to select both the Radio Buttons, but as per my need i should select only one radio button. And i should perform validation Wn user not selected even one radio button i should show the error msg, like " select sex "
View 8 Replies i have a table which looks something like the following
<table id="Table1" border="0">
<tr>
<td><b>1.</b> Question 1</td>[code]....
how do i go about looping through each group of radio buttons and getting the text of the selected radio button ?the code displayed above is created dynamically ... in my aspx file i have the following code
<asp:Table ID="Table1" runat="server">
</asp:Table>
I have the following code<asp:RadioButton runat="server" Text="Male"></asp:RadioButton>I want a gap between the radio button and the radio button text, I made the following changes in the text field(prefixed a space) Text=" Male". However, I don't feel this is the most efficient way.
View 1 RepliesI have a web application that shows a page containing between 6 and 20 AJAX UpdatePanels, contained with Custom Web (.ascx) Controls.
You can see an example of such a page here:
[URL]
The problem I'm getting is that when the user FIRST clicks any of the radio-buttons on any of the controls in the page, ALL the radio buttons that have an active selection ALSO fire an rb_CheckChanged event (see application log below). On subsequent radio-button
clicks, only that RB fires the event (as expected).
This behaviour is having a dramatic impact on performance. The page loads quickly, and a "normal" RB click provides an AJAX update correctly within 1 second. The problematic first RB click, however, takes up to SIX seconds to process, which is unacceptable from a user experience standpoint.
Developed in VS.NET 2008, ASP.NET 3.5. Also I converted the "Web Site" solution to a "Web Application" (pre-compiled) and got the same performance (still too slow). Release builds run only marginally faster than debug builds.
Why would a single RB selection change cause all RB's that have a "selection" set on them to also fire? (The "selection" is determined through database settings every time the control is populated, which is called from within the parent page control's Page_Load function. This selection is determined also at first page load, since all the controls get populated then, so why would the clicking of an RB cause them all to fire an event, and only once? That's what I don't get...)
Not sure if this is an AJAX issue, or general ASP.NET UI issue, so I'm posting in two forums on this one.
i have gridview in which i have a Image button with id (' ImageButton3 ') on click of which i want to hide that corresponding row , by first highlighting it by followed fadeIn effect ....
Here is code of gridview:
<asp:GridView ID="grid" runat="server" AutoGenerateColumns="False" CssClass="mGrid" ShowFooter="true"
AlternatingRowStyle-CssClass="altrow" DataKeyNames="productid" Width="100%" BorderWidth="0px"
AllowPaging="True" PagerStyle-HorizontalAlign="Center" PagerStyle-VerticalAlign="Middle">
<RowStyle Height="50px" />
[Code] ....
This is code for javascript:
<script type="text/javascript">
$(document).ready(function() {
$("[id*=ImageButton3]").live("click", function() {
$(this).closest("tr").hide();
return false;
});
});
</script>
But the code i am using only hide the row , i am not able to get the effects of fadeIn and highlighting ..
Also i want i know that am i using right code to hide gridview row ?
I have 3 tabs with 3 seperate gridview and radios buttons in them. Each page has a seperate submit button, but for some reason each pages submit button is validating all the radio buttons on each tab, i picked the seperate controls to validate under but on any submit theya re all validated instead of just the ones on that tab.
[Code]....
I have a databound Gridview (with a LINQ datasource). The gridview displays questions from the SQL DB to the user. I've inserted a radio button list into the gridview with 3 horizontal radio buttons with fixed values of 1,2,3 for the user to select. I have a question ID, a tempuserID, and AnswerValue columns set up in the database. It all works nicely.
After the user selects radio buttons, I would like for them to push a button to submit the QuestionID, the associated Radio Button Value (AnswerValue) and their tempUserID into the DB. How do I do this? I'm not sure what to do next and what VB/LINQ code to put in the code behind file in the button click event handler. I'm also not sure on what to use for the tempUserID, can I use the sessionID? I'm using VB and here's my code:
[Code]....
I am just starting with asp.net mvc and I am currently just playing around with returning data from a MySql backend. I am trying to return a set of data as a tabular list of radio buttons for each row in my data, however even though the rows come out and the data the radio buttons seem not to be rendered. This is my controller code which grabs the records and returns the view SelectOffice (if records are found).
[Code]....
And here is the view SelectOffice
[Code]....
And here is my very simple Office class
[Code]....
I have a set of radio buttons (individual buttons) in asp.net. These buttons have a group name (if that matters). What I need to happen is, anytime a user selects a radio button, I need some jQuery to be called. I am not doing a page refresh when the user selects the radio button, so I need this to be done on the fly. I have tried a "CheckedChanged" event in asp.net and can not get it to fire. I have also tried:
if ($('input:radio').attr('checked') === true) {
var checked = $('input:radio:checked').val();
}
however it only works the first time the page is loaded, not when a user selects something other than the default. What Can I do to fix this?
I would like to find which radiobutton group (not individual radiobutton) has not been checked, tried a lot of different ways, no success so far. What I want to do is find validate radiobutton groups and highlight them.
$('input:radio:not(checked')).each(function() {
$(this).css("background-color","blue");
});
I want to use radio button on my form for users to select there sex, either male or female. I need this to reflect in the field in my access database any time they choose there sex. can anyone put me through this. Am using asp.net with VB code and an access database
View 4 Repliesradio button not working
<%
@
Control
Language="C#"
Inherits="System.Web.Mvc.ViewUserControl" %><style
type="text/css">
.style1
{
}
text-decoration:
underline;color:
#0066FF;.style2
{
}
color:
#0066FF;</style>
<table
style="width:
100%;"><thead><th
colspan="3">Submit A Referral
<span
class="style2"> </span><span
class="style1">I'm
a Sales Rep</span></th></thead>
<tr>
<td>
Email
</td>
<td>
<%
= Html.TextBox("Email") %></td>
<td>
</td>
</tr>
<tr>
<td>
Password
</td>
<td>
<%
= Html.TextBox("Password") %></td>
<td>
</td>
</tr>
<tr>
<td>
First Name
</td>
<td>
<%
= Html.TextBox("First Name") %></td>
<td>
</td>
</tr>
<tr>
<td>
Last Name
</td>
<td>
<%
= Html.TextBox("Last Name") %></td>
<td>
</td>
</tr>
<tr>
<td>
Company Name
</td>
<td>
<%
=Html.TextBox("Company Name") %></td>
<td>
</td>
</tr>
<tr>
<td>
Service Phone Number
</td>
<td>
<%
=Html.TextBox("Service Phone Number") %></td>
<td>
</td>
</tr>
<tr>
<td>
Cell Phone Number
</td>
<td>
<%
=Html.TextBox("Phone Number") %></td>
<td>
</td>
</tr>
<tr>
<td>
ADT #
</td>
<td>
<%
=Html.TextBox("ADT") %></td>
<td>
</td>
</tr>
<tr>
<td>
Address
</td>
<td>
<%
=Html.TextBox("Address") %></td>
<td>
</td>
</tr>
<tr>
<td>
Zip
</td>
<td>
<%
=Html.TextBox("Zip") %></td>
<td>
</td>
</tr>
<tr>
<td>
City
</td>
<td>
<%
=Html.TextBox("City") %></td>
<td>
</td>
</tr>
<tr>
<td>
State
</td>
<td>
<%
=Html.TextBox("State") %></td>
<td>
</td>
</tr>
<tr>
<td>
InstallationType
</td>
<td>
<%
--<%=Html.RadioButton("installationType"); %>--%></td>
<td>
</td>
</tr>
<tr>
<td>
</td>
<td>
</td>
<td>
</td>
</tr>
<tr>
<td>
</td>
<td>
</td>
<td>
</td>
</tr>
<tr>
<td>
</td>
<td>
<%
=Html.CheckBox("Terms",
false) %> I agree to the terms of service</td>
<td>
</td>
</tr>
</table>
i have a view wich gets in its model (among other things!) a string with the name of partialView to be rendered in a certain div.
well, in that partial view there are two radion buttons, with the same name but diferent id's and values.
when i submit the form in the view, wich also has the partialView controls (radio bts), in the respective controller i get inside a formcollection an item with both values of the radio buttons,
my question is, how can i find wich one was selected in the view?
Does anyone know how to bind a Yes/No radio button to a boolean property of a Strongly Typed Model in ASP.NET MVC.
Model
public class MyClass
{
public bool Blah { get; set; }
}
View
<%@ Page Title="blah" Inherits="MyClass"%>
<dd>
<%= Html.RadioButton("blah", Model.blah) %> Yes
<%= Html.RadioButton("blah", Model.blah) %> No
</dd>
I have a set of radio buttons for "yes" and "no" values which have a name="choice". "yes" is checked by default. They're both runat="server". I read the choice on postback like below. It works perfectly fine as long as the validation doesn't fail. For example, if I select "no" and validation fails on postback, I still see "no" selected. But if I submit the form after correcting everything, the value read is "yes" on server side! Is this a bug in .net, and if so, how do i fix this?
foreach (string key in Request.Form.AllKeys)
{
if (key.EndsWith("choice"))
return Request.Form[key] == "yes";
}
