I have suppliers table with id int value for each supplier. I'm trying to edit columns of this table inside of ListView.
i'm trying to access e arg but it doesn't have any data on id of the row i'm trying to update?
I have a listview set up in "flow" mode where the existing records are all on an extended page so you can scroll down to any record.
The InsertItem Template is in the first position, making it easy to insert a new record.
And one can scroll down the page to any record, click the edit button and update that record -- nice having everything on one scrollable page.
I am running into a problem with validations. I have validation controls restricting inputs for all the textboxes on the Insert Item template. They work fine. And on Item Inserted I am running a page validation:
Page.Validate()
If Not Page.IsValid Then
e.Cancel = True
End If
which works fine also.
The problem occurs when I scroll down to an existing record, and go to edit it. I have all the same validation constraints on the textboxes for the EditItemTemplate as I have on the InsertItemTemplate. But I cannot successfully do a page validation on updating the record. The code I am using on update is:
Protected Sub LVRentals_ItemUpdating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.ListViewUpdateEventArgs) Handles LVRentals.ItemUpdating
Page.Validate()
If Not Page.IsValid Then
e.Cancel = True
End If
End Sub
This results in a Cancel even if there are no validation errors on the InsertItemTemplate because the Page.Validate() seems to be causing the InsertItemTemplate to think its fields should be filled out also.
Here is the code for a typical entry of the InsertItem Template:
[code]....
All the controls in the Edit Item template are part of ValidationGroup "edit1" and those of the InsertItem Template are part of ValidationGroup "edit2"
How can I get around receiving validation errors on the InsertItem Template when I am trying to validate just the EditItemTemplate when both are present on the page?
I am using list view to display the the data but i am getting an error like An item placeholder must be specified on ListView 'ListView1'. Specify an item placeholder by setting a control's ID property to "itemPlaceholder". The item placeholder control must also specify runat="server.Even i have specified the itemplaceholder id but no use still same error.
[Code]....
I want to reach checked rows item in ASP.Net Listview control.
For example:
if 3 Lines of Listview checked, I want to reach checked items value in listview.
have a listview with a list of comments. I would like to add the avatar of the person that posted the comment to each comment. To accomplish this I need to find the ListViewItem find the UserID get the avatar URL and add it to the ListView. I am sure I can do all of this in the ListView Databound event but how?
protected
void ListViewViewComments_DataBound(object sender,
EventArgs e)
{
try
[code]...
I figured this wouldn't be too difficult to do, but I can't seem to figure out how to do it. Is there a way to easily access the current item from a ListView data source? For instance, you can easily evaluate the current item's properties using Eval("propertyName"), but is there a way to access the object itself?
And if this isn't possible, what I ultimately want to do is get the Type of the object.
I'm trying to implement a onclick event to select an item in a asp:ListViewControl.
<ItemTemplate>
<tr runat="server" id="MemberRow" onclick='<%#ClientScript.GetPostBackClientHyperlink(LvMembers, string.Format("Select${0}", Container.DataItemIndex)) %>'>
<td>
[code]...
However the onclick does not fire the ListView.Command or ListView.SelectedIndexChanging event? If I add a button with CommandName="Select" it works as expected? The POST data is the same!
{_EVENTTARGET=ctl00%24ContentPlaceHolder1%24LvMembers&_EVENTARGUMENT=Select%245&__VIEWSTATE=...}
i want to mak emy listview to show data like this
h1 h2 h3 h4 h5
h6 h7 h8 h9 h10
h11 h12 h13 14 h15
Here is my code:
[Code]....
What I'm trying to do is: I have a listview control on my page and in my code behind, I created an SQLDataSource object which I defined its Select, Delete, Update and Insert Command strings. I then binded that datasource to my listview. When I load the page, it's obvious the select command works. however, when I perform the insert, the ItemInserted event triggers, but the itemInserted doesn't trigger and there is nothing inserted in my database.I'm not sure what to do here. I also hard coded the insert values in my insert command. So it's not depending on the form values.
View 3 RepliesI'm using a ListView and have two buttons that allows users to delete or edit a item from the list. Below is the code for the buttons:
<td>
<asp:ImageButton ID="ButtonEdit" runat="server" ImageUrl="~/Styles/Images/Edit.png" ToolTip="Edit" OnClick="ButtonEdit_Click" />
<asp:ImageButton ID="ButtonDelete" runat="server" ImageUrl="~/Styles/Images/Delete-Red-Cross.png" ToolTip="Delete" CommandName="Delete" />
</td>
When the user clicks the edit button I want to pass the unique identifier from the item in the list to the parameter string so I can retrieve it in the edit page. how to retrieve the ID from the selected item?
I Use listView and flow configure and connect to database whit wizard.
in Item Template View, i cannot remove items, when reomve it, after 2 seconds, An item that was deleted is shown again!
May be I'm trying to run before I can walk, but here goes, I find coding for ASP so frustrating it's just not logical JIM!Anyways after my rant, as I'm a huge fan of the listview control in WinForms I'm trying to get the hang of it in ASP, wth not much luck so far.
View 3 RepliesFor some reason, I get an error half way through cycling through my items in a listview right before a record that has a null value for one of its items. It doesnt' haappen any other time. It happens after completing one cycle of the onItemDatabound eventfor a record in a row that is immediately before a particular null value in record immediatley following.My code is written to look for the proper edititemindex, and if it sees it, then it checks for null values for all the items. I can't even get that far, it errors just before the onItemDatabound even runs for the correc edit index
View 5 RepliesI have a collection of objects I bind to a Listview like this:
if (!IsPostBack)
{
List<Equipment> persons = new List<Equipment>
{new Equipment{ItemName = "Sworn", ItemCount = 7, ItemCost = 255}, [code]....
I want to Add/update/delete from this object collection and submit the final data object collection to the BL when the user saves... Rather than just delete/add/update everytime a row is changed.So my question is how do I maintain state for that datasource? I have tried this (delete example)
protected void lvMain_ItemCommand(object sender, ListViewCommandEventArgs e)
{
switch (e.CommandName)
{
case "Delete":
{[code]....
But it does nothing. I can't rebind it to the datasrouce because at this point the datasource is null.. I assume the listview keeps its own view state which contains the data?... I guess worse case I can always hold the Object Collection in a Session object.. ..
I have a Listview showing my data from the DB.And i have a Formview in INSERTMODE.I added a linkbutton the my Listview, in order to EDIT the data.How could i use the same Formview to Edit the item ? Will i have to change the DEFAULTMODE ? And how can i pass the Id to it ? Will i have to alter the SELECT COMMAND aswell to that it gets the querystring "ID" ?
View 12 RepliesI am using listview to create a forum (like this website) like page. I want that the first post of a thread should look different than others ( i.e. an item to look different than all others items of itemtemplate).
View 3 RepliesI need to display the data using listView. I want the data to be displayed like this:
Student Name: John
Exam Grade
MidTerm1 A
MidTerm2 B
I want each item to looke like that. For this, I created a 'Student' class which has the Name and Exams(A list of Exam class objects) Properties. And the Exam class has ExamName and Grade properties. how I should specify the ItemTemplate and LayoutTemplate for the ListView??
I know the question has already been posted here but we didn't get to an real solution.I have bound my ListView to an SqlDataSource and I want to write some text in a control present in the view created in the LayoutTemplate depending on some properties of the rows returned.Obviously, I'm using the ItemDataBound event to feed my items but this is not the point.
The spontaneous solution was to bind the ListView.DataBound event and access the raw datasource (a DataTable?) and do the required calculations.I inspected the Items property and, despite it was not empty, the related DataItem property was null.The only work-around I can come to is to execute the calculations in the ItemDataBound event and accumulate the result in some private fields. But it's really ugly to see and makes harder to get some of the required values.
I have a objeckt :
class myfam
-name
-age
-home
I show object data in a viewlist like this:
Name ,age
Hans 32
John 40
Know how can i find out Hans is in my listview ? ...?? Listview.Items.contain("hans").....THIS is not working
I have a list view with couple rows, which has a delete button for each row.
Now once the delete is performed and it's a success, I want to remove that item from the ListView
[Code]....
I'm trying to delete a item from the listview. I can delete the item from the database ok, but the listview item does not get removed, I could do a Response.Redirect to redisply the page but this is overkill? Below is my code:
[Code]....
<asp:ListView ID="pricedRoomListView" runat="server" DataKeyNames="room_id" DataSourceID="pricedRoomsObjDataSource"
View 3 RepliesI have a listview displaying my products and an "Add to Cart" button in the item template. the button fires 2 functions that should add that specific products information and the order details to two SQL database tables(Orders and Quantity(intersection entity between Orders and Products tables)) then you get redirected to the shopping cart page and it should display the item(s) according the specific key in the Quantity table(key is foreign key in Orders)My problem is that i cannot pull any information from the specific item template when i click that button. Need a way to find that specific controls information in my listview. Can anyone help with this?Below is my item template...
<ItemTemplate>\
<td id="Td2" runat="server">
<table ID="Prodtable" runat="server" width="130px" height="95px">
[code]...
Suppose I have a horizontally oriented ListView that always shows 4 items and also has a left & a right button: < A B C D >
Now, let's say I have a DataTable containing 20 entries, with indices ranging from 0 to 19.
When the page first loads, this is what'll be displayed: < 0 1 2 3 >
Assuming those buttons are regularly configured DataPage buttons then if I press the right one we'll get this: < 4 5 6 7 >
And if I press the right one again we'll get this: < 8 9 10 11 >
But suppose I'd like the left & right buttons to only scroll one at a time, so that pressing the right one at the start results in this: < 1 2 3 4 >
In such a case, is there a way to configure the DataPager to do this or should I instead introduce regular buttons and perhaps have them call a hidden DataPager?
I am trying to insert manually new items in a Listview control using objects. The item seems to be inserted, but when the page is sent back to the browser, there is nothing there. Here is the code that I am using:
[Code]....
I can assign a list of object to the datasource, but when I try to input a new object to the list of items from the ListView, it doesn't work.
