I have a requirement whereby I either have to perform and update or an insert on 1 table inside a transactionscope
There are 3 table in total, 2 will always be an insert, but 1 could be either an update or insert depending if some data already exists a foreign key relationship exists between all 3 tables (not on the same column though)
heres my code
[Code]....
[Code]....
I have two BLL classes ItemsBLL & BalanceBLL. When ever a new Items gets Added to Items table few details needs to be added to Balance Table.
I am using the following code to perform the operation, is this code efficient or something needs to be changed.
The function that needs to be checked is the Insert function in ItemsBLL Class.
[Code]....
Is this function effective?
[Code]....
[Code]....
Im running an ASP.NET MVC application hosted with Mosso, there are telling me that they cannot enable DTC because they run everything in medium trust.So when executing code that references: TransactionScope I get the following error. The transaction manager has disabled its support for remote/network transactions. (Exception from HRESULT: 0x8004D024)
Is there anyway to get around this?
[Code]....
Now,
1. If In transaction scope if 1st Transaction is commited, buting 2nd one exception occurs and it is rolled back
2. Any other exception occurs, after 1st transaction is completed/commited
Here, explicit transactions are used. In both cases does all transactions in the scope are revert back? What are the possiblities here?
we have a asp.net webforms app using NHibernate. Here are some specifics:We need Distributed Transactions because we write to the database as well as to a queue.Because this is a web app, we use the recomended Session-in-view pattern. We have a HTTPModule that opens the NHibernate session on the BeginRequest event and closes it on EndRequest.Within the flow of a request, we have several separate moments where we need to do transactional work. For this, we use TransactionScope.So basically, what happens is this (pseudocode):
using(var session = sessionFactory.CreateSession()){
using(var tx1 = new TransactionScope(){
//work work work
[code]...
I am working on Sales application. In database i have SalesOrderHeader & SalesOrderDetail tables. They are almost typical Adventureworks db tables.
How to insert data in both tables using TransactionScope so if any of the record from the two tables generate error complete transaction roll-back.
One thing more I am using TableAdapters, My initial concept was inserting record in SalesOrderHeader, get SalesOrderId using Scope_Identity & bulkInsert Records to SalesOrderDetail using TransactionScope.
I have code that is supposed to do some database operations and then send an email through local iis smtp virtual server. All within one TransactionScope. It looks like
[Code]....
The second one where I use something similiar is
[Code]....
I want to notice that these events fire in the sequence they are shown. Now when there's an error, the db operations are rolled back, but the mail is sent anyway. I'm using Windows XP SP3, IIS 5.1, .Net 3.5, Visual Studio 2008. If I'm correct, TransactionScope uses MSDTC, right? I couldn't find anything about MSDTC working with smtp. Should it even work?
[code]....
Suppose say I am doing a couple of operations.
First a delete and then an insert.
Now, these two operations are done with two different connections (say con1 and con2). Both these connections are enlisted in the same TransactionScope.
Before the delete/insert operations the connections are opened and immediately closed.
So, now if the insert fails, then how is the delete rollbacked since con1 has been closed?
I'm writing some merge functionality in C# asp.NET MVC2. I am also using using Linq2SQL.
I have a block of code which calls two services, MessageService and UserService. These both in term call their appropriate repositories and make the amendments to the db. Each repository declares it's own instance of the repository so I'm thinking this will escalate the following code to DTC . The code is called from the AccountService, is this going to work at this level? And also is it bad practise to declare the DataContext at the top of every repository or should I pass the object around somehow?
//Run the merge
try
{
using (TransactionScope scope = new TransactionScope()) [code]....
I m using transactionscope and there was no problem until my domain changed.When it hits the scope7, it inserts the data and starts all over again and inserts for the second time.
Here is my sample code:
Using scope7 = New TransactionScope(TransactionScopeOption.RequiresNew)
Dim comm As New Data.SqlClient.SqlCommand("INSERT INTO ABC (ID, AID, Type) VALUES (@ID, @AID, @Type)", conn)
comm.Parameters.AddWithValue("@ID", TaskID)
comm.Parameters.AddWithValue("@AID", FormID)
comm.Parameters.AddWithValue("@Type", FormType)
conn.Open()
comm.ExecuteNonQuery()
scope7.Complete()
I am confused about why I would need to wrap the DataContext's SubmitChanges within a transactionScope when modifying multiple tables. I was under the impression that the DataContext would track these changes and would therefore create its own transaction if need be.
In other words, if a change was made to update table A, B and C or if I made changes to 10 out of 20 items in a collection of rows, that the datacontext would track these changes and create its own transaction. If that is correct then why have I seen examples that wrapped these types of updates in a TransactionScope?
I am struggling to create a webservice method using LINQ technology and to populate a dropdown in a form. Here is the Webservice code.
[WebMethod]
public
string[] GetAllCountries()
{
LinqClassesDataContext db =
new
LinqClassesDataContext();
var q =
from c
in db.ListContinents()select
c;
return q.ToList() ;
}
And here is the form code behind
protectedvoid
Page_Load(object sender,
EventArgs e)
{
WSClass WS =
new
WSClass();//bool
ds = WS.GetAllCountries();
var v = WS.GetAllCountries();
ddlContinent.DataSource = v;
ddlContinent.DataBind();
}
I am using LINQ and sending a linq object to the view and trying to show it in a textbox like this
<%=Html.TextBox("petname",Model.PetName) %>
But I am getting error, how can I show (PetRecord.PetName) which is my linq entity
I am writing a plugin to help with a current ERP system we have that I am not allowed to modify the data structure at all. The table I am dealing with has over 100 columns and I am wanting to set my linq object propertychanged event and submitchanges or do I really have list out each property and set it equal to the new one?Below is an example of what I am trying to do:
[Code]....
txtLastName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Last_Name.ToString();
Like that I have large number of controls on my form. I have dought, if I assigned like this, db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Last_Name.ToString(); to every control, then I have set of controls like,
ddlSalutation.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Salutation.ToString();
txtLastName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Last_Name.ToString();
txtFirstName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).First_Name.ToString();
txtMI.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Middle_Initial.ToString();
txtAddress.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Home_Address.ToString();
txtCity.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).City.ToString();
ddlState.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).State.ToString();
txtZip.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Zip_Code.ToString();
txtSSNo.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ssn.ToString();
txtMRNo.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Mr_No.ToString();
txtDOB.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Birth_Date.ToString();
RBGender.SelectedItem.Value = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Gender.ToString();
RBMaritalStatus.SelectedItem.Value = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Marital_Status.ToString();
txtHomePhone.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Home_Phone.ToString();
txtWorkPhone.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).WorkPhone.ToString();
txtCellPhone.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).CellPhone.ToString();
ddlSuffix.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Suffix.ToString();
txtReligion.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Religion.ToString();
txtEmail.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Email.ToString();
txtSSOName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ssn.ToString();
txtPatientKin.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Patient_Kin.ToString();
txtRelationWithPatient.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Kin_Relation.ToString();
txtPhoneNo.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Kin_Phone.ToString();
ddlPreferredPharmacy.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Id_Pharmacy.ToString();
txtEmergencyContactName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Emergency_Contact_Name.ToString();
txtEmergencyContactNumber.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Emergency_Contact_Phone.ToString();
txtRelation.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Kin_Relation.ToString();
txtRace.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Race.ToString();
ddlHowDidPatientFindUs.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).How_Found.ToString();
txtEmployerName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Employer_Name.ToString();
txtEmployerOccupation.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Employer_Occupation.ToString();
txtEmployerPhone.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Employer_Cell_Phone.ToString();
txtEmployerAddress.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Employer_Address.ToString();
txtEmployerCity.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Employer_City.ToString();
ddlEmployerState.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Employer_State.ToString();
txtEmployerZip.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Employer_Zip.ToString();
txtRecordsReleasedTo.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Records_Released_To.ToString();
txtOtherInfo.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Other_Info.ToString();
txtPopupNote.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Popup_e.ToString();
ddlPPlanName.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Insurance_Name.ToString();
txtPGroupNo.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Group_No.ToString();
txtPIDNo.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Id_No.ToString();
txtPPhone.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Plan_Phone.ToString();
txtPVerifiedWith.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Verified_With.ToString();
txtPVerifiedPhone.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Verified_Phone.ToString();
txtPEffectiveDate.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Effective_Date.ToString();
txtPExtDate.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Ext_Date.ToString();
if (db.usp_ATI_FetchPatientDetails(iPatientID).Count() > 0)
{
txtPGLastName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Grn_Name.ToString();
txtPGFirstName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Grn_Name.ToString();
txtPGMI.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Grn_MI.ToString();
txtPGBirthGDate.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Grn_Dob.ToString();
txtPGAddress.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Grn_Address.ToString();
txtPGCity.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Grn_City.ToString();
ddlPGState.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Grn_State.ToString();
txtPGZip.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Grn_Zip.ToString();
txtPGEmployerFirstName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Grn_Emp_Fname.ToString();
txtPGEmployerLastName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Grn_Emp_Lname.ToString();
txtPGEmployerPhone.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Grn_Emp_Phone.ToString();
txtPGEmployerOccupation.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Grn_Emp_Occupation.ToString();
txtPGEmployerAddress.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Grn_Emp_Address.ToString();
txtPGEmployerCity.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Grn_Emp_City.ToString();
ddlPGState.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Grn_Emp_State.ToString();
txtPGEmployerZip.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Grn_Emp_Zip.ToString();
ddlPGPatientRelationshipToGuarantor.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Grn_Rel_With_Pat.ToString();
txtPGOtherInsuranceNotes.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Other_Notes.ToString();
txtPGAuthorization.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_Authorization.ToString();
txtPGAob.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(0).Ins_AOB.ToString();
}
if (db.usp_ATI_FetchPatientDetails(iPatientID).Count() > 1)
{
txtSGLastName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Grn_Name.ToString();
txtSGFirstName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Grn_Name.ToString();
txtSGMI.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Grn_MI.ToString();
txtSGBirthGDate.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Grn_Dob.ToString();
txtSGAddress.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Grn_Address.ToString();
txtSGCity.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Grn_City.ToString();
ddlSGState.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Grn_State.ToString();
txtSGZip.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Grn_Zip.ToString();
txtSGEmployerFirstName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Grn_Emp_Fname.ToString();
txtSGEmployerLastName.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Grn_Emp_Lname.ToString();
txtSGEmployerPhone.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Grn_Emp_Phone.ToString();
txtSGEmployerOccupation.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Grn_Emp_Occupation.ToString();
txtSGEmployerAddress.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Grn_Emp_Address.ToString();
txtSGEmployerCity.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Grn_Emp_City.ToString();
ddlSGState.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Grn_Emp_State.ToString();
txtSGEmployerZip.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Grn_Emp_Zip.ToString();
ddlSGPatientRelationshipToGuarantor.SelectedItem.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Grn_Rel_With_Pat.ToString();
txtSGOtherInsuranceNotes.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Other_Notes.ToString();
txtSGAuthorization.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_Authorization.ToString();
txtSGAob.Text = db.usp_ATI_FetchPatientDetails(iPatientID).ElementAt(1).Ins_AOB.ToString();
}
My question is that, for each control the Stored Procedure called or not? If it is yes then it is time consuming and I need to use LINQ to DataSet or LINQ to Object rather than to call SP for each control. What is difference between LINQ to DataSet and LINQ to Object?
I've build a linq query.But i want a random selection so its not always ID : 1,2,3,4,5,6 How can i randomize this var? I like to bind it to a repeater.//TagCloud:
Random rand = new Random();
var tc1 = from i in JumpTide.cms.menu.GetMenuItems(32)
select new
[code]...
We would like to perform something like this
string strCondition = "FirstName=='abc'"
from p in People.Where(strCondition) select p
In our architecture we are usign both Linq-Sql as well Linq-Entity. So please give some thoughts wehter it is possible or not and is there any way to perform this?
I've added the Dynamic.cs file to my project and have set it's Build Action = Compile in order to get the System.Linq.Dynamic namespace.
However, when I try to use any of the new code I am getting an ambiguous call error; see below.
[Code]....
I have the code below could to rewrite from LINq to SQL to Linq to Entity.
[code].....
I have to know how will i do encryption though linq.There is any way in linq to do encryption and decryption.
View 1 RepliesI'm looking to translate an SQL query into linq
INNER JOIN Usrs ON
SAQ.UserId =
Usrs.UserId AND Scan.UserId =
Users.UserId
I'm not sure how to include the "AND" in the LINQ statement.
I have a question about linq delete.
I have 2 table in database and they are joined.
First Table: UserID, UserName, UserSurname, UserPhone, CompanyId
Second Table: CompanyId, CompanyName
First Table I have many recods with related second table.
I want to delete one company in second record, But firtly I have to delete users (more than 1)
How can I delete it with using linq?
I am having trouble with this I have 3 Data tables i use over and over again which are cached I would like to write a LINQ statement which would do the following is this possible?
T-SQL VERSION:
SELECT P.[CID],P.[AID]
,B.[AID], B.[Data], B.[Status], B.[Language]
FROM MY_TABLE_1 P
JOIN
(
SELECT A.[AID], A.[Data], A.[Status], A.[Language] FROM MY_TABLE_2 A
UNION ALL
SELECT B.[AID], B.[Data], B.[Status], B.[Language] FROM MY_TABLE_3 B
) B on P.[AID] = B.[AID]
WHERE B.[Language] = 'EN' OR B.[Language] = 'ANY' AND B.STATUS = 1 AND B.[Language] = 'EN' OR B.[Language] = 'ANY' AND B.STATUS = 1
Then i would like it to create a result set of the following
Results:
|CID|AID|DATA|STATUS|LANGUAGE
I want to use "if statement" in Linq query. How can I do this situation?
For example:
if txtAge.Text=="", I will not use that in Linq Query.
else txtAge.Text!="", I will use that in Linq Query.
How to use Linq in asp.net MVC 3.0?
View 12 Replies