ADO.NET :: Using SCOPE_IDENTITY() To Retrieve The Id Of Last SQL Insert
Sep 27, 2010
I need to get the id of a record created so that I can store that ifnormation in another SQL table. A snipet of my c#code is as follows:
string insertSql = "INSERT INTO [Group] ([userid], [groupname]) VALUES (@userid, @groupname); SET @groupid = SCOPE_IDENTITY()";
using (SqlConnection myConnection = new SqlConnection(connectionString))
{
myConnection.Open();
SqlCommand myCommand = new SqlCommand(insertSql, myConnection);
myCommand.Parameters.AddWithValue("@userid", currentUserId);
myCommand.Parameters.AddWithValue("@groupname", groupTextBox1.Text);
SqlParameter groupidParameter = new SqlParameter("@groupid", SqlDbType.Int);
groupidParameter.Direction = ParameterDirection.Output;
myCommand.Parameters.Add(groupidParameter);
myCommand.ExecuteNonQuery();
myCommand.ExecuteNonQuery();
gid = (int)groupidParameter.Value;
myConnection.Close();
}
The problem is that I am not getting the @groupid from the SET @groupid = SCOPE_IDENTITY() that is appended to the INSERT statement. The groupid in the SQL table is the Key of type uniqueidentifier
View 3 Replies
Similar Messages:
Jun 7, 2010
Iam inserting ,updating in one DBfunction .i want to retrieve identityvalue when in insert.for that am adding select SCOPE_IDENTITY() in insert statement.how i can i get this value??
public int funAddEdit_rtblIncidentTypesDB(clsCM_Inc_IncidentTypesData objData, int actiontype)
{
string qry = "";
if (actiontype == 1)
qry = "INSERT INTO _rtblIncidentType (cDescription,iEscGroupID,bAllowOverride,bRequireContract,iIncidentTypeGroupID,iWorkflowID,bAllowOverrideIncidentType,bPOIncidentType,cDefaultOutline) VALUES ('" + objData.cDescription + "'," + objData.iEscGroupID
+ ",'" + objData.bAllowOverride + "','" + objData.bRequireContract + "'," + objData.iIncidentTypeGroupID + "," + objData.iWorkflowID + ",'" + objData.bAllowOverrideIncidentType + "','" + objData.bPOIncidentType + "','" + objData.cDefaultOutline + "'); select
SCOPE_IDENTITY() ";
else if (actiontype == 2)
qry = "UPDATE _rtblIncidentType SET cDescription='" + objData.cDescription + "' WHERE idIncidentType=" + objData.idIncidentType;
int result = SqlHelper.ExecuteNonQuery(clsHelper.ConnectionString.ToString(), CommandType.Text, qry);
return result;
}
if i exceute the above query individually,it returns iddentity value,,bt unable to retireve the value in codebehind.
View 1 Replies
Jan 12, 2010
I am trying to pass in as an insert parameter for SQLds2 the scope_identity of the insert of SQLds1.
Exception Details: System.InvalidOperationException: Error executing 'InsertCommand' in SqlDataSource 'SqlDataSource1'. Ensure the command accepts the following parameters: @Name1, @NewId
[Code]....
View 4 Replies
Nov 16, 2010
I insert a new user to my SQL database
but when I try to retrieve my Identity PK using select SCOPE_IDENTITY()
I cant use it in my page
here is my code and my stored procedure
_sqlConnection = new SqlConnection(ConnectionString.connectionString());
View 2 Replies
Feb 7, 2011
I guess it is too late and I'm too tired to see what I'm doing wrong. Here is what I'm trying:
int imageId = imageDal.AddImage(new SqlParameter[]
{
new SqlParameter("@IMAGE_ID",
SqlDbType.Int, Int32.MaxValue, ParameterDirection.Output,
true, 0, 0,"IMAGE_ID", DataRowVersion.Current,DBNull.Value),
new SqlParameter("@IMAGE",
SqlDbType.Image, 11, ParameterDirection.Input,
true, 0, 0,"IMAGE", DataRowVersion.Current,image)
});
public int AddImage(SqlParameter[] spParams)
{
SqlHelper.ExecuteNonQuery(BaseDAL.ConnectionStringImages, INSERT_IMAGE_SQL, spParams);
return Convert.ToInt32(spParams[0].Value);
}
Stored Procedure:
[dbo].[sp_insert_image]
-- Add the parameters for the stored procedure here
@IMAGE_ID int OUT,
@IMAGE image
AS
BEGIN
INSERT INTO images
(IMAGE)
VALUES
(@IMAGE)
SELECT @IMAGE_ID = SCOPE_IDENTITY();
END
GO
I get DBNull as spParams[0].Value. I've tried setting value of @IMAGE_ID to a constant in my stored procedure yet it didn't change anything so the problem isn't with my stored procedure (that is what I think). When I execute the procedure from sql management studio, I see the inserted_id returning..
View 2 Replies
Oct 13, 2010
This is completely frustrating and probably embarrassing as well. A while back I posted a similar question and resolved the issue. [URL]...scope_identity The program has been working ever since, until yesterday when as it turns out SCOPE_IDENTITY() started returning an empty string even though a record is being inserted. I am not sure what has changed since the fateful day.
[Code]...
I am hoping that there is something I am just not seeing here. A lot of the information I have seen thus far indicates that there are problems with SCOPE_IDENTITY() but most of those are related to inserting multiple records. As you can see this should be fairly straight forward. The thing that really has got my goat is that it used to work and now it doesn't. If someone could take a look at the above code and comment on any anomalies it would be great. Also I have heard suggestions for switching to ADO.NET and it is beginning to look a lot more attractive every day. But I have a ways to go before making the switch so it is SqlDataSources for now
View 37 Replies
Jul 10, 2010
I'm trying to create multi insert query in single stored procedure along with scope_identity variable. while execute the aspx page getting error "Procedure 'sp_seller_ins' expects parameter'@new1', which was not supplied." I have created stored procedure:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[sp_seller_ins]
@txt_n_properity VARCHAR(50),
@txt_t_properity VARCHAR(50),
@txt_prop_for VARCHAR(50),
@txt_flat_no VARCHAR(50),
@txt_loc_country VARCHAR(50),
@txt_loc_state VARCHAR(50),
@txt_loc_district VARCHAR(50),
@txt_loc_town VARCHAR(50),
@txt_loc_area VARCHAR(50),
@txt_loc_locality VARCHAR(50)
AS
BEGIN
declare @new1 int
declare @new2 int
INSERT INTO dbo.sel_pro_details( nature_property, type_property, property_for, flat_no) VALUES ( @txt_n_properity, @txt_t_properity, @txt_prop_for, @txt_flat_no);
set @new1 = scope_identity()
INSERT INTO dbo.sel_loc_details( country, state, district, town, area, locality, pro_details_id) VALUES (@txt_loc_country, @txt_loc_state, @txt_loc_district, @txt_loc_town, @txt_loc_area, @txt_loc_locality, @new1);
set @new2 = scope_identity()
end
code behind aspx page
sqlconn mySql = new sqlconn();
mySql.CreateConn();
mySql.Command = mySql.Connection.CreateCommand();
mySql.Command.CommandType = System.Data.CommandType.StoredProcedure;
mySql.Command.CommandText = "sp_seller_ins";
mySql.Command.Parameters.Add("@txt_n_properity", SqlDbType.VarChar);
mySql.Command.Parameters["@txt_n_properity"].Value = txt_n_properity.Text;
mySql.Command.Parameters.Add("@txt_t_properity", SqlDbType.VarChar);
mySql.Command.Parameters["@txt_t_properity"].Value = txt_t_properity.Text;
mySql.Command.Parameters.Add("@txt_prop_for", SqlDbType.VarChar);
mySql.Command.Parameters["@txt_prop_for"].Value = txt_prop_for.Text;
mySql.Command.Parameters.Add("@txt_flat_no", SqlDbType.VarChar);
mySql.Command.Parameters["@txt_flat_no"].Value = txt_flat_no.Text;
mySql.Command.Parameters.Add("@txt_loc_country", SqlDbType.VarChar);
mySql.Command.Parameters["@txt_loc_country"].Value = txt_loc_country.Text;
mySql.Command.Parameters.Add("@txt_loc_state", SqlDbType.VarChar);
mySql.Command.Parameters["@txt_loc_state"].Value = txt_loc_state.Text;
mySql.Command.Parameters.Add("@txt_loc_district", SqlDbType.VarChar);
mySql.Command.Parameters["@txt_loc_district"].Value = txt_loc_district.Text;
mySql.Command.Parameters.Add("@txt_loc_town", SqlDbType.VarChar);
mySql.Command.Parameters["@txt_loc_town"].Value =txt_loc_town.Text;
mySql.Command.Parameters.Add("@txt_loc_area", SqlDbType.VarChar);
mySql.Command.Parameters["@txt_loc_area"].Value =txt_loc_area.Text;
mySql.Command.Parameters.Add("@txt_loc_locality", SqlDbType.VarChar);
mySql.Command.Parameters["@txt_loc_locality"].Value =txt_loc_locality.Text;
mySql.Command.ExecuteNonQuery();
mySql.Command.Dispose();
mySql.Connection.Close();
mySql.CloseConn();
View 1 Replies
Jun 27, 2010
I have an orders table with a column names orderID. What I want to do is insert a new record and get the value from the new orderID column. The orderID is my Primary key. The Insert SQL I have now is -
INSERT INTO orders
(creditAutorizarionNumber, OrderName, OrderPersonPhone, OrderPersonEmail)
VALUES (@creditAutorizarionNumber,@OrderName,@OrderPersonPhone,@OrderPersonEmail)
How do I write the query to get the newly entered orderID ?
View 6 Replies
Nov 11, 2010
i have used Ado.net entity framework...how to insert an image to a table and retrieve it an show it.
View 21 Replies
Nov 28, 2010
i want to insert a word document in to database and retrive it ...while retriving it would be better to view in a webpage the doc file. Else after retriving there should be download buttons for each document ...clicking leads to the ordinary document download
View 1 Replies
Sep 26, 2010
How can I retrieve the row ID immediately as I insert a new record with LINQ? I need to refer back to it to update the row since it will be the only unique data in this particular table ( it's the primary key and the ID number is auto generated)
View 3 Replies
Jan 21, 2010
I have been searching on here for many hours and read many posts but for some reason I am being slow and cannot figure this out. I am writing a record and need to get the identity field back. I have tried many combinations based on what I have read but the below code is where I am sitting at now. it has appdatasource.ExecuteScalar() underlined and the error says 'ExecuteScalar' is not a member of 'System.Web.UI.WebControls.SQLDataSource'. I would be very grateful if someone could point out what I am missing to get this to work.
Protected Sub SubmitApp_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles SubmitApp.Click
Dim appdatasource As New SqlDataSource
appdatasource.ConnectionString = ConfigurationManager.ConnectionStrings("ConnectionString1").ToString
appdatasource.InsertCommandType = SqlDataSourceCommandType.Text
appdatasource.InsertCommand = "INSERT INTO APPLICATION (FirstName,MiddleName,LastName,AcceptTerms,IPv4Address,DateInserted) VALUES (@FirstName,@MiddleName,@LastName,@IPv4Address,@DateInserted);select @@SCOPE_IDENTITY"
appdatasource.InsertParameters.Add("FirstName", fname.Text)
appdatasource.InsertParameters.Add("MiddleName", minit.Text)
appdatasource.InsertParameters.Add("LastName", lname.Text)
appdatasource.InsertParameters.Add("DateInserted", DateTime.Now())
appdatasource.InsertParameters.Add("IPv4Address", Request.UserHostAddress.ToString)
Dim appid As Integer = appdatasource.ExecuteScalar()
End Sub
View 4 Replies
Nov 19, 2010
I have created a Dataset object (XSD file) whithin it there is a procedure called InsertWebsite.
In my code, I call this like this:
[Code]....
When I execute the commans it retrievs value "1" which is not the actual ID genereted by Insert event.....
How can I retrieve this ID and stll using the current design?
View 4 Replies
Apr 9, 2014
I used tinyMCE in my edit.aspx page that bind it from database
TextBox1.Text = _dr["description"].ToString();
and users can change this editor text and click on button and update information
below is code
protected void ImageButton2_Click1(object sender, ImageClickEventArgs e)
{
string data = Session["behcode"].ToString();
SqlCommand _cmd = new SqlCommand("insertstate", _cn);
_cmd.CommandType = CommandType.StoredProcedure;
_cn.Open();
_cmd.Parameters.AddWithValue("@Name", txtstore.Text);
_cmd.Parameters.AddWithValue("@Ownername", txtowner.Text);
_cmd.Parameters.AddWithValue("@Description", TextBox1.Text);
_cmd.ExecuteNonQuery();
Session["Message"] = true;
_cn.Close();
}
in database I have House_info table that has description column and if I enter text in textbox1 it update description column now problem is when I enter text in textbox1 it didn't change text and didn't update data in database...
I put breakpoint in imagebutton2_click event and see in this code
_cmd.Parameters.AddWithValue("@Description", TextBox1.Text);
it didn't send any text from textbox1 and show text that bind from database and didn't change it... so what should I do?
View 1 Replies
Jan 18, 2010
I've built a form for entering some data into a table in my database, now I want to INSERT that data, and get back the ID (which is an autonumber) of the record that has just been added. I've got the INSERT part working just fine, and I've tacked "SELECT SCOPE_IDENTITY();" onto the end of that, but now I need to retrieve the returned number. At the moment all of this is done with an SqlDataSource (with the "INSERT" statement being put together and fired by some C# in the codebehind file, which takes data from a form on the page). Is there a quick way to grab that number and put it in a variable?
View 2 Replies
Mar 3, 2011
I am trying to return the identity value of a inserted record for the first time in ASP.NET but it always returns 0, I can see in the database that a record is being inserted and the identity value is not 0.
Stored Proc:
[Code]....
Code Behind:
[Code]....
View 8 Replies
Nov 18, 2010
I am using a EntityDataModel. I have one table that has fields id, first, last
I have a stored procedure for inserting that is mapped to this table in the entydatamodel.
[Code]....
If I execute this in the Code Editor the Output window would look like this
[Code]....
Here is the sample code for a button click event on a simple page that only has a button. This is a bit of bad example because I am actually setting the field id. But assuming that it was an Identity field that was incrementing itself by 1....what would be the code after SaveChanges() that would capture the reutrn value from expId in the stored procedure.
[Code]....
View 2 Replies
Aug 6, 2010
I am using DetailsView attached to a ObjectDataSource to add a new record to a database. When it is complete I want to display the ID of the row that was added. I have a column in my database called ID that is set as the primary key and has Identity Specification enabled.
My Insert statement is:
{
View 3 Replies
Aug 3, 2010
i have the following stored proc that inserts data into a database based on a stauts field. the first stored proc inserts into the first table and i am trying to get the identity field out as i need this value for the next stored proc. the first stored proc works fine and inserts the data but the secnd one doesnt, even though there is data there.
[Code]....
View 3 Replies
Oct 21, 2010
I have a Stored Proceedure which DID return the Scope_Identity when this was executed in SQLServer 2000.
Now I am porting this over to SQLServer 2008, and this always returns 0, and not the Scope_Identity which it should.
Here is the Stored Proceedure which will pass null for the parameter @pProjId for an insert:
[Code]....
Here is the script which creates the hip_Project Table:
[Code]....
What do I need to change for SQLServer 2008?
Again, this executed fine in SQLServer 2000 and always returned the Scope_Identity as expected. This problem has come up with other stored proceedures as well for which I need the Scope_Identity returned.
View 3 Replies
Mar 7, 2011
have a problem i wanna display SCOPE_IDENTITY on webpage..i using this code and insert some data to database:
Dim
mysqldatasource As
New
[code]...
View 4 Replies
Jun 13, 2010
Basically i deal with two tables.i have a table T1 of the following format:id company_name i need to read this data and create a table T2 as followsi wrote the following code. it worked fine for retrieving data and modification but fails to insert the modified data into the 2nd table.the error is, it does not recognise the value for @token
ArrayList dynarr=new ArrayList(); // global variable
protected void Button2_Click(object sender, EventArgs e)
{
int row = 1; int i;
string strcmd = null;
string Connection = "Data Source=....";
SqlConnection conn = new SqlConnection(Connection);
string str = "select company_name from T1 where ID=@ID";
[code]...
View 2 Replies
Nov 17, 2010
I've used a sql data source to execute an insert stored procedure into my sql database. This time though, I want to execute the sp from my code behind. BUT, I'm stuck on the parameters and how to pass in the ones for the insert, and return one parameter, which is the identity of the row just inserted. The error I'm getting is. I'm missing something, but I don't see what... I think it's with the input/output parameters...
Procedure or function 'sp_CloneIT' expects parameter '@ClonedMatterID', which was not supplied. My stored proc
[Code]....
View 1 Replies
Jun 9, 2010
Im trying to get the ID out of the record that i'm inserting using scope_identity. I've add the following line of code to the Insert statements in the sqldatasource - SET @insID = Scope_Identity() I've add the following line to the Insert parameter list
asp:Parameter
Name="insID"
Type="Int32"
Direction="Output"
I now want to insert a number records into the database using the following:
Dim insID As Object = e.Command.Parameters("@insID").Value ' gets out latest ID
Dim ordernumber As String = "CX" & insID.ToString & DateTime.Now.DayOfYear.ToString
sqlOrders.InsertParameters("orderNumber").DefaultValue = ordernumber
sqlOrders.InsertParameters("orderDate").DefaultValue = DateTime.Now
sqlOrders.InsertParameters("customerID").DefaultValue = userID
sqlOrders.InsertParameters("productID").DefaultValue = productID
sqlOrders.InsertParameters("totalPrice").DefaultValue = "0.00"
sqlOrders.InsertParameters("status").DefaultValue = "Paid"
I currently have this code in the SQLDataSource_Inserting sub but the first line only works once the record is inserted. How can i get the ID out as im inserting the parameters?
View 3 Replies
Jul 18, 2010
I am trying to add "Select Scope_Identity()" to my table adapter but vs2010 respond with "Unable to parse query text." error message.
Code for Insert SQL is -
INSERT INTO orders
(creditAutorizarionNumber, OrderName, OrderPersonPhone, OrderPersonEmail)
VALUES (@creditAutorizarionNumber,@OrderName,@OrderPersonPhone,@OrderPersonEmail)
I tried to add -
;Select Scope_Identity()
How can I use the Scope_Identity() withing a BLL table adapter ?
View 2 Replies
