I have created a Dataset object (XSD file) whithin it there is a procedure called InsertWebsite.
In my code, I call this like this:
[Code]....
When I execute the commans it retrievs value "1" which is not the actual ID genereted by Insert event.....
How can I retrieve this ID and stll using the current design?
I want to issue an INSERT command for an SQL Server table using DataAdapter without first issuing a SELECT command. Could anybody send me lines of code to handle this? Also how do i manage INSERT into selective table columns (I have 10 columns but i only want to update 2 of them)?
View 2 RepliesNo matter what I do I keep getting the error that my input string is not valid and that the system cannot convert a string to a double. I have a table with two fields, both are defined as nvarchar(25). My command text is:INSERT INTO OtherProducts VALUES ('Sample','Test') am using Visual Web Developer. This is as simple as it gets. I have tried parameters as well.
View 10 RepliesIs there any method by which we can retrieve random data from a dataset or rather directly from a table.
For example, I have around 30 questions in my table, I just wanted to display 20 among them and that too in a random order without the same item repeating. Can we achieve this using SP or through some Dataset manipulation?
How to retrieve the data from the session (Dataset) and save it into a database
[code]...
I have been searching on here for many hours and read many posts but for some reason I am being slow and cannot figure this out. I am writing a record and need to get the identity field back. I have tried many combinations based on what I have read but the below code is where I am sitting at now. it has appdatasource.ExecuteScalar() underlined and the error says 'ExecuteScalar' is not a member of 'System.Web.UI.WebControls.SQLDataSource'. I would be very grateful if someone could point out what I am missing to get this to work.
Protected Sub SubmitApp_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles SubmitApp.Click
Dim appdatasource As New SqlDataSource
appdatasource.ConnectionString = ConfigurationManager.ConnectionStrings("ConnectionString1").ToString
appdatasource.InsertCommandType = SqlDataSourceCommandType.Text
appdatasource.InsertCommand = "INSERT INTO APPLICATION (FirstName,MiddleName,LastName,AcceptTerms,IPv4Address,DateInserted) VALUES (@FirstName,@MiddleName,@LastName,@IPv4Address,@DateInserted);select @@SCOPE_IDENTITY"
appdatasource.InsertParameters.Add("FirstName", fname.Text)
appdatasource.InsertParameters.Add("MiddleName", minit.Text)
appdatasource.InsertParameters.Add("LastName", lname.Text)
appdatasource.InsertParameters.Add("DateInserted", DateTime.Now())
appdatasource.InsertParameters.Add("IPv4Address", Request.UserHostAddress.ToString)
Dim appid As Integer = appdatasource.ExecuteScalar()
End Sub
Iam inserting ,updating in one DBfunction .i want to retrieve identityvalue when in insert.for that am adding select SCOPE_IDENTITY() in insert statement.how i can i get this value??
public int funAddEdit_rtblIncidentTypesDB(clsCM_Inc_IncidentTypesData objData, int actiontype)
{
string qry = "";
if (actiontype == 1)
qry = "INSERT INTO _rtblIncidentType (cDescription,iEscGroupID,bAllowOverride,bRequireContract,iIncidentTypeGroupID,iWorkflowID,bAllowOverrideIncidentType,bPOIncidentType,cDefaultOutline) VALUES ('" + objData.cDescription + "'," + objData.iEscGroupID
+ ",'" + objData.bAllowOverride + "','" + objData.bRequireContract + "'," + objData.iIncidentTypeGroupID + "," + objData.iWorkflowID + ",'" + objData.bAllowOverrideIncidentType + "','" + objData.bPOIncidentType + "','" + objData.cDefaultOutline + "'); select
SCOPE_IDENTITY() ";
else if (actiontype == 2)
qry = "UPDATE _rtblIncidentType SET cDescription='" + objData.cDescription + "' WHERE idIncidentType=" + objData.idIncidentType;
int result = SqlHelper.ExecuteNonQuery(clsHelper.ConnectionString.ToString(), CommandType.Text, qry);
return result;
}
if i exceute the above query individually,it returns iddentity value,,bt unable to retireve the value in codebehind.
Basically i deal with two tables.i have a table T1 of the following format:id company_name i need to read this data and create a table T2 as followsi wrote the following code. it worked fine for retrieving data and modification but fails to insert the modified data into the 2nd table.the error is, it does not recognise the value for @token
ArrayList dynarr=new ArrayList(); // global variable
protected void Button2_Click(object sender, EventArgs e)
{
int row = 1; int i;
string strcmd = null;
string Connection = "Data Source=....";
SqlConnection conn = new SqlConnection(Connection);
string str = "select company_name from T1 where ID=@ID";
[code]...
Today I am facing the problem with Typed DataSet using DataSet.XSd file, And How to fetch, Delete and Update the Database through Dataset.xsd file.
View 9 Replieshow do i copy required row in dataset to a new dataset. i have bind a xml into a dataset and i need to display say row 3 to 5 only so i do a for loop but i have encounter problem when trying to copy the rows to a new dataset.
do i have to write the xml to datatable and bind it to dataset and from there copy over ?
how to retrieve all records of dataset for calculation with each record? with sample coding.
View 3 RepliesI wanna iterate the "DataColumn" values, I have retrieve data column from a dataSet.
GridView1.DataSource = ds.Tables[0];
DataColumn colt = ds.Tables[0].Columns["dorc"];
the dorc field is a boolean value, I want to replace the boolean value from:
true-->debit
false-->Credit
But I can't access the Columns["dorc"] values..
I have a details view to insert some data. I want to validate this data myself. use the ItemCommand to trap the insert command. If the data entered does not match what I need, I want to somehow stop the insert procedure at this point.
View 3 RepliesMy web form contains a detailsview control that I have added a templated field to with a DropDownList in the InsertItemTemplate. The DetailsView default mode is 'insert. My detailsview is attached to a sqldatasource that has a stored procedure in the db to handle the insert. When I enter data in the fields and select insert all values from the detailsview are written to the table except for the selection that was made in the dropdownlist. I am using the ddl.selecteditem.value to populate my variable however when the insert method is envoked it doesn't send my value. The DDL value that I am capturing does not need to be written to the table it is just a flag for some variables that need to be set at the stored proc level. How do I get the DDL selected value to be sent with the insert statement?
Here is my code behind:
Protected
Sub
DropDownList1_SelectedIndexChanged(ByVal sender
As
Object,
ByVal e
As System.EventArgs)
Dim temp
As DropDownList
Dim AccessLevel
As
String
temp = AddUserDetailsView.FindControl("DropDownList1")End
Sub
AccessLevel = temp.SelectedItem.Value
Label1.Text = AccessLevel
I dont know why my GridView.DataSource is become nothing when the Page.IsPostBack = true.What i did is bind the dataset to the GridView.DataSource when page load. Then when the button click event is trigger i need to get all the records from GridView. But when i debug and check i found that the GridView.DataSource is become nothing. how should i get all records from the GridView and assign to dataset. I'm using VB.net to work on.
View 6 RepliesI want to click on a date in the calendar and use that date in an insert command.
I have inserted a Calendar in Visual Web Developer and cannot figure out how to get the date so i can use it when inserting a new entry in my table... how do i "catch" the date and how to insert it as date.
I have the insert command working with dummy fields...
I am collecting user data using 3 detailsView, dv1,dv2, and dv3 each connected to sqldatasource , ds1,ds2,ds3. I would like the user to click one button(InsertBtn) and add all the data entered in each detailsview. I added
ds1.insert();
ds2.insert();
ds3.insert();
to OnClick event of InsertBtn. But the data does not get inserted...?? How can I make the user click one button and add the datas in each detalsView to database..???
I working on a ASP.net project, database is MS SQL
for a reason that cannot find why, when I insert an entry to the data base, the entry is duplicated.
The controll runs this:
Protected Sub grdCustomer_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles grdCustomer.SelectedIndexChanged
Dim Quote As New QuoteBLL
Dim Customer As New BeeSafeShutterSystemTableAdapters.CustomerTableAdapter
[Code]....
I've added a simple SqlDataSource to my site with insert properties. I've also created some code behind to capture the insert command (oninserting="SqlDataSource_NewsLetterSubscription_Inserting").
Thing is how do I actually trigger the command to 'insert' from a standard button?
<asp:SqlDataSource ID="SqlDataSource_NewsLetterSubscription" runat="server"
I would like to know if I can do the following: when I am in insert mode, can I dynamically change the select command of and then display that result in the second dropdownlist based on what was selected in the first dropdownlist.
I would like to include the minimum code to demonstrate what I am trying to do.
[Code]....
[Code]....
I am trying to pass in as an insert parameter for SQLds2 the scope_identity of the insert of SQLds1.
Exception Details: System.InvalidOperationException: Error executing 'InsertCommand' in SqlDataSource 'SqlDataSource1'. Ensure the command accepts the following parameters: @Name1, @NewId
[Code]....
I do have a details view, which insert data to a database table using SQL Datasource. Now i need the data to be inserted in to 2 tables instead of one.
View 1 Repliesi have a button in gridview whose command name is "hold" i want when i click n hold button of first row then the whole row values will be transfererd to default2.aspx ...
and if i click the hold button of gridview second row then the second row value will be transferred to Default2.aspx ,,how to do that ?
i m using that ...but it always transfer the 1st row value even i select first last or middle row ..in gridview ....
whats wrong in this code ?
[code]....
I am using 1 textbox with a Ajax Calendar extender to allow my user's to select a date graphically (exp: 12/15/2009). I have another textbox for the hour and minutes in military time(exp: 15:30). I think i have the code to grab the data from the 2 textbox's and combine them to be inserted into the field (exp: 12/15/2009 15:30). Here is my insert code for the Field:
[Code]....
However unless I make all the fields Nullable the insert fails, on top of that none of the other field that I have selected on the Detailsview Insert or Edit are inserted into there fields. Half of my fields have to be non-null values. So how do I fix this?
I can supply additional vb code and the aspx code if needed.
This is the error I'm getting: Cannot insert the value NULL into column 'Operation_type', table '/GAOSDB.MDF.dbo.BC_Perf_Log'; column does not allow nulls. INSERT fails. The statement has been terminated.'
This is the first non-null column.
I need to get this figured out because I have 30 other web pages that will be utilizing the same approach.
What is the most equivalent method to get the command line arguments in web, asp.net, simmiliar to an executable file application?
View 1 Replies
