i want to use a function to get all the fields from a LINQ table as ill be using this table alot i thought putting it in a function would be quicker
how can i get all the fields and all the field data from linq table and use it in a function
for example
var address1 = FunctionName.Address1
var postcode = functioname.postcode
or however i can make this work
[Code]....
How to make the linq throw error, when not null columns are there in the table.
Why I am saying, it is. I tried to add to column in the table. Linq throwed error os some sort. I could not understand. it was like some innner table etc.
I had to resort to native sql, which showed the error, as the not null fields are there in the table.
I have selected the tables using the wizard, but for some reason CR doesn't display all the fields in the tables, so there are some tables in Field Explorer that lack some fields. The fields that aren't shown are both int, and varchar, some of them allow nulls and some of them don't, I can't seem to find a pattern as why some fields aren't loaded into Field Explorer.
View 4 RepliesHow to pass field of the table to the function?
View 1 Replieshow i call a image field from another table? the image field in the same table is working fine but the one on the other table is not. I have created the foreign key and made the connection... What else do i need to do to call that field? Page Load:
[Code]....
int COMPANYID = 0;
[Code]....
I have a table named RECIPE which is linked to an other table name RECIPE_STATUS
In RECIPE table I have a field named Status_Id which contains the name of the Status which is fetch from the RECIPE_STATUS table based on this ID.
The RECIPE table sample information are as follow :
ID Name Status_Id
====================
1 Test1 0
2 Test2 1
3 Test3 2
The RECIPE_STATUS entries are as follow:
ID Name
========
0 Locked
1 Running
2 Free
From an ASP.net page I would like that my user is capable of changing the RECIPE_STATUS from a given recipe. For that I have a DataGrid which is bind to the RECIPE table.
But then what I would like is that the STATUS shown to my user to be the name Locked,Running or free depedning on the Id
How can I bound in my Datagrid the Recipe.Status to be bind to RECIPE_STATUS.Id ?
IN addition to that, If my user change the status for a given recipe, it should be properly save.
I have a table added to a dbml file in my website. The website is already deployed to Live server. Now I have been instructed to a add a new field to the table. The field will be defaulted as getdate().
I don't plan to modify my dbml file for this change since the filed holds a default value. Will it cause any issue(performance related or any other). I am sure that I will not have to use the newly added field in the website. I am new to LINQ.
I am trying to update my table ARTICLES and it has a field COUNTER, Everytime a user enter this ARTICLES, the page_load event runs a LINQ to SQL query taking the QueryString as parameter, increasing the COUNTER field in 1.
[Code]....
I have a listview control bound to an SqlDataSource. As part of the formatting I want to add a title to the data returned from my database. For instance if the data base returns a phone number I want to add 'Tel.' first. However I do not want to diplay this
title if the datafield is empty. Here is what I have done so far.
<ItemTemplate>
<asp:Label ID="BusinessLabel" runat="server" Text='<%# "Tel. "+Eval("Business") %>' CssClass="TeleStyle" />
Or This:Tel.
<asp:Label ID="BusinessLabel" runat="server" Text='<%# Eval("Business") %>' CssClass="TeleStyle" />
</ItemTemplate>
Business is a phone number. If the data field contains a number I get: Tel. 1234 123456. If the field is empty I get Tel. If Business is null I want nothing dsplayed, how do I do this?
I'm exploring ASP.net. I have created a FormView based on Linq Data Sources. There are several fields in my datasource that are either future or archaic.
1) Do all fields in the DataSource need to have a control in the FormView?
2) Does ASP.net need to insert/update all fields in the DataSource?
I have a situation where I have a file with each Account Record contains Monthly Expense Total Fields and Monthly Budget Fields for 2009, 2008 and 2007. I'm working with 72 fields (36 Expense and 36 Budget).
Need to create New Year Proceure that will shift data from 2008 to 2007, 2009 to 2008 and move Zeros to 2009 for both Expenses and Budgets.
I can do this using Parameters and Update SQL but I am under the impression that I must specificaly name each field in defining Parameters and SQL Update Command.
Since all fields are sequential withing a record, is there a way that I can use a For/Next loop to index my way through the fields moving data from one year to another?
When using DataReader I'm able to use reader.item(index) to access data record fields.
I have a grid view attached to a custom query. The query selects data and the address data in the database is split into different fields like street_address1, mail_zip etc. etc. What I would like to do is display all the address data fields in my database in one field on the Grid View.
View 1 RepliesI need to display Name1 and Name2 in a single column in gridview. I am using Linq. How is this done.
View 2 RepliesI would assume this is possiable but I cannot seem to find it anywhere. I just one the contents of a single field, I don't see why I have to return the how
record to get get that information, here is my current code, how can I make this better without returning the entire record, for just getting contents of one field.
var patternrecord = storedb.Patterns_Table.Single(a => a.Pattern_GUID == id);
PMEDIA.Pattern_Key = patternrecord.Pattern_Key;
I developed a web site more then a year ago with .net2.0/c#/mssql 2005. it works fine but i was asked to replace mssql with mysql.
I wrote a class to complete data access works (unfortunately, I didnt use nhibernate or other data access tools :((
I edited the class to use System.Data.Odbc objects rather than System.Data.SqlClient.
It works fine in selecting data but not manipulating data. when i try to insert new data it adds null data for all fields in the table.
in debug mode, i noticed that it might be caused by OdbcParameter but not sure.
I have a datatable with the following column names
ProviceID, ProvinceName, Year,
TPM, PM 10, PM 2.5, B(a)p
I'm trying to display data from this table in a gridview using template fields. Here's an example of a label in my item template
[Code]....
When i bind data to this grid view, i get an error saying column "PM 2" was not found. For some reason, the program is dropping the .5 from the column name. I am exploring the possibility of replacing the number with alphabets only but this may not be possible as the end user may not find it user friendly. Is there a way for me to get around this problem? I get a similar problem with B(a)p, it drops everything after the B. Any ideas on how to get the gridview to bind column names with special chars in it?
I have a gridview that is populating from a SQL DB and working fine. However, based upon certain data I find in fields in the SQL table, I want to place a 'n' or a 'y' in extra columns in the gridview that I am assuming need to be templatefields. My thought was I could maybe add 8 template columns and then I could put a 'y' in the appropriate column based upon the data I find the table. For the life of me, I cannot figure out how to do this. I want to do this at rowdatabound time ( i think) but I just cannot find out how to, in my code, put that 'y' in the columns. Is this the right way to do this or do I need to do it another way? How do I get that 'y' in the proper column?
View 3 RepliesIf I am going to use the asp.net membership and roles, the asp.net database includes an aspnet_Users table that has the userid and email address. If I have custom fields is it best practice to maintain a separate usert table and link on user id or to add fields to the aspnet_Users table?
View 1 RepliesI have a SQL Server table with a number of fields that are defined with the "Float" data type. I'm running a simple query to retrieve the data from this table and use it to populate a Data Table in my C#.net application.
I just discovered that the data type of the Data Table fields is Double, not Float as I expected. As such, when I store a value like 0.157 it ends up getting stored like this: 0.15700000524520874
I'm aware that such extra "noise" occurs when such a conversion occurs. My major question has to do with why .Net didn't set the Data Type to Float (ie. Single) when the table was first populated?
Am using datalist to create a kinsd of message board, in the back end am having two tables one for the parent comment , and other for the child comments
The data source is extracted by LINQ to SQL with the load option , so I get everthing when I debug on the code behind , and I can see all the fields each parent comment and the child comments.
the problem is with binding the data on the disply for example all the parent table fildes can be rendred without any problems:
<%# DataBinder.Eval(Container.DataItem, "comment1Parent") %>; "showing me the orginal post"
Problem here:
<%# DataBinder.Eval(Container.DataItem, "Childcomment") %> is not rendred and I got this error msg:
DataBinding: 'DataAccessLayer.Comment' does not contain a property with the name 'childComment'.
In the debug I navigate to the childComment and this is its HTML visualisar:
new System.Linq.SystemCore_EnumerableDebugView<DataAccessLayer.Comment>(((ASP.usercontrols_comments_ascx)this).Comments)).Items[0]._comments_Replies.entities.items[0].childComment
I tried
<%# DataBinder.Eval(Container.DataItem, "_comments_Replies.childcomment")
Same as above error came to me.
Can I call a javascript function from a hyperlink field in gridview?I dont want to navigate to a different page,instead i need to call the javascript on clicking the hyperlink.
View 3 RepliesI am trying to display in the Gridview the Full Name of a person.
I have MemberFirstName and MemberLastName as fields in the Table.
Is it possible to display the FullName based on the member fields of the table ?
This is the sqlDateTime overflow problem again. Background. As I'm sure you know dates must be between 1/1/1753 and 12/31/2999. If you have an empty date field, it throws and exception. So I created a function (below) that solve the problem when attempting to update or insert a record with a date field. Works great.
Public Shared Function MakeDateField(ByVal pasDate As String) As Nullable(Of DateTime)
If IsDate(pasDate) Then
Try
If pasDate <= System.DateTime.MinValue Then
Return Nothing
Else
Return CType(pasDate, DateTime)
End If
Catch ex As NullReferenceException
Return Nothing
End Try
Else
Return Nothing
End If
End Function
So I thought about using a time field. I have the field, have the validator in place and then attempted to test the page. It resulted in my least favorite error message "sqlDateTime overflow".
I can think of several workarounds like adding a date or a fixed date to the time field, or converting it to a string. Each of these is problematic.
IS THERE A BETTER WAY TO UPDATE/INSERT TIME FIELDS.
I M New to Linq, I M Searching articles using
DBSearchDataContext db = new DBSearchDataContext();
object q = from b in db.Articles
where b.Tags.Contains(val) |
b.NewsTitle.Contains(val) |
b.EnglishContent.Contains(val)
select b;
I cannot exclude results where category = video or photos. H to exclude category where value is "videos" or "Photographs"
i am choosing a category from a DropDownList controll, and if want to add a new category at the same time i have a TextBoks for it, i have create a Model, BLL and DAL classes, my problem is:
in the DAL class i want to add a new row to Question, but i need to check first if the object.category exsist in the table Category, if it does i want to get the Cid for it if it dosen't exist i want to create a new raw then get the Cid, this is my code:
public string add(Faq inFaq)
{
using (var db = new DBClassDataContext())
{
try
{
var se = from Category in db.Categorys
where Category.category == inFaq.category
select Category.Cid;
if (se.Count() == 0 ).........