I'm Using Ajax Accordion i want Collapsed Panes Start with "+" Symbol and When It Expanded Change That Symbol to "-" When Collapsed Again Start with + .... and Continue like that...
Note : I'm Using Header Tempalte and Content Template and Pass Data Source to it.
I have an accordion control and it is working fine. Except that when i set selectedindex to -1 (server side) and the control colapses to have no panes expanded. The client side diplay style for the previously expanded pane remains in the expanded colour scheme even though the pane has collapsed.
View 1 RepliesI have a accordion control with 4 accordion panes. Initially when the page loads I expand the first accordion pane. Now if the user click the header on the first pane I need to collapse it. ( so in this case all the accordion panes will be collapsed).
Similarly is the user clicks on the header of any alraedy expanded pane, I need to collape that particular pane.
How can i do this?
I was working with the previous version of the AjaxControlToolkit (I had the source project in my solution, just in case I needed to debug something) and everything worked ok, now I've downloaded the lastest build (40412) and I've choosen to remove that project and only use the binaries (of 40412). I added this line in the web.config (inside <controls>) to have it prepared for all the pages, and avoid the need to use the @register in each one of them <add namespace="AjaxControlToolkit" assembly="AjaxControlToolkit" tagPrefix="ajaxtoolkit"/>
Now, only have the binaries I think I should used
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
and inside <assemblies> this line
<add assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e"/>
I don't know what should I write as PublicKeyToken, I'm getting Cannot resolve symbol 'AjaxControlToolkit' and, of course, my UserControls that use the AjaxControlToolkit are giving me error.
If a user enters "<" or if it already exists in a textbox inside an update panel, I am getting "internal server error 500" during post back. I believe the page suspects a HTML injection and is attempting to stop it. I could use Page.EnableEventValidation to avoid it but I really don't want to do that. Is there any other way, I could resolve it (like replace < with > or something like that)?
Update:
This is happening in a textbox inside a gridView.
[Code]....
I'm using an Ajax Accordion with several panes. On a postback the currently opened pane is always reset back to the first pane.
View 1 RepliesHopefully this is just me missing something really simple; I have 3 accordion panes of which the first one is visible on page load but if I click on the other panes nothing happens.
Here is the code I'm using:
[Code]....
how to change my accordion pane's selectedindex and have come up empty handed thus far.
I've tried both with javascript and C#
Javacsript example:
var a = $('<%=AccordionMain.ClientID%>');
a.set_SelectedIndex(index);
C# example:
AccordionMain.SelectedIndex = 2;
Both of the above code excerpts run, but neither visibly change the selected pane. What am I doing wrong?
I have an Accordion control with several panes.
On page load I want to set controls inside the panes with data from dictionary (every pane has from 1 to 10 controls).
protected void Page_Load(object sender, EventArgs e)
{
[Code]....
I am creating an accordion dynamically through aspx.cs file. There is a subaccordion inside each accordion pane. I am seeing that if there are 10 or more accordion panes in the root accordion, then I can only expand first 4 or 5 panes. Nothing happens when I click on other panes. This is happening in IE8, tried on three different machines. I don't see this problem with Mozilla, it can open as many panes as possible, I have tried with 20 panes in mozilla.
View 1 RepliesI have the following problem: I have a web form which contains ajax accordion. Each accordion pane contains a usercontrol. Each usercontrol consists of several textboxes and 2 buttons. All the textboxes and 2 buttons (inside these usercontrols) are wrapped in the UpdatePanel. Following updatepanels is the UpdatePanelAnimationExtender for some animation whithin each usercontrol. Each UpdatePanelAnimationExtender has a different animation id from other usercontrols.
Basically when i only put one usercontrol in the accordion pane everythign works. I have my javascript to clear textboxes and the submit button does a postback to server. However, when i put 2 of these controls in 2 different panes only the last one works. Since the last one works i assume it is because it was last to be parsed on pageLoad. So how can i make it that when user clicks on the accordion pane, the usercontrol is ->?re-initialized?<- so that it could work.
Here is 1st UserControl: uctl1.ascx
[Code]....
Here is 2nd UserControl: uctl2.ascx
[Code]....
when i click on pane and fill up the information in textboxes i click on submit and usercontrol should postback to server for processing.
[Code]....
i used collapsablepanel extender
View 2 RepliesI want to set focus to textbox B after a user has entered data in textbox A. Both textboxen reside within custom controls which reside in the same accordion pane. The custom controls override the Focus method and set focus to the textbox they contain. Focus works fine until I place the controls inside an accordion pane. I've tried ((ScriptManager)Page.Master.FindControl("ScriptManager1")).SetFocus(TextBoxB) from within the TextBoxA_ValueChanged event handler to no avail.
View 1 RepliesI am using vb.net/asp.net 2005.
I have an accordian in my nested gridview that has the defaul selectedindex=-1 (meaning its collapsed).
In order to change the expand icon I need to find out using javascript what the selectedindex value of the accordian is when it loads, does anyone know how to do this?
The URL link below will open a new Google mail window. The problem I have is that Google replaces all the plus (+) sign in the email body with blank space. It looks like it only happens with the + sign. ( I am working the ASP.NET web page)
[URL]
(In the body email, "Hi there+Hello there" will show up as "Hi there Hello there")
I have a field that I display via:
String.Format({0:c},amount)
This produces the string "$28.28" However, when I try to convert back to a decimal amount, I get an incorrect format exception:
amount = Decimal.Parse(amount.Text, NumberStyles.Currency)
I also tried it with NumberStyles.AllowCurrencySymbol with the same results. I verified that the value in amount.Text is "$28.28". Am I missing something? Shouldn't these two operations use the same currency symbol and formats?
The problem is accordion's showed on the page, but doesn't works. I try use code of all examples, but the problem is the same for all of them. I don't understand what to do, because the code is the same as in the tutorials. When I click on the pane it doesn't changing/closing/opening. What can it be?
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajaxToolkit" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> [code]....
I am using CultureInfo methods to successfully format all different currencies into their correct format.
But on some exceptions, such as EUR and SEK currencies I need to be able to add them after the value. At the moment my CultureInfo is formatting them in the following way: "SEK 1.00,00" when it needs to be "1.00,00 SEK".
Im wondering how I can display a Euro symbol in UTF-8 Format ?
View 2 RepliesI used the culture in my project. i want currency format only. i dont' want to shows the currency symbol.
View 3 RepliesI am currently localizing my MVC website, using the Html.Encode method.
I've got a global resouce named "Localization" and using it by e.g. <%= Html.Encode(Resources.Localization.FirstName) %>
When compiled and viewing in the browser it works perfectly, but in VS 2008 Development Edition it marks it red and displays Cannot resolve symbol 'Resources' when hovering it.
I want the html text back from symbol. I paste here the sample code.
<script type = "text/javascript" >
$(document).ready(function() {
$('#button1').click(function() {
[code]...
Hey I have the follow email validation expression
^[w-.]+@([w-]+.)+[w-]{2,4}$
What I am looking for is for email addresses to be allowed which have a "+" before the @ part of the email cheers
Im trying to find out how to transform euro symbolto UTF-8 Format.
What does this even look like ?
Ideally I would like to go
String.Replace("€","UTF-8 Symbol for Euro")
I need Indian rupee symbol in TextBox ...
View 1 Replies