My bootstrap tab is inside update panel now on postback it loses its active tab state . I referred this article :
[URL]
But it didn't worked for me. How to maintain bootstrap tab active on postback inside update panel.
I removed the Trigger section the partial post back does not occur when I click add button on footertemplate of the gridview.
View 1 Repliesi have one label out of update panel and one button inside update panel. in button click event i update the label text. when i run the code and click on button then partial postback occur and button click event fire but label value is not change. if i put the label too in the update panel then label value change at the time of button click. i do not understand why label value is not getting updated. suppose if i want that label should stay out of update panel and label value should change at the time of partial postback then how to write the code. i dont want put the label in any update panel.
View 5 Replieswhen postback occurs due to update panel's child control then in page load event how can i know that it was dut to update panel ?i.e., i want to differentiate between general postback and postback due to update panel's child control in page load event .How is that possible ?
View 10 RepliesI have a gridview that putted in ASP.NET Panel. both of panel and Gridview are in an UpdatePanel. there is a column in gridview that Causes Partial PostBacks. i want to Maintain Panel Scroll position on those postbacks.
View 1 RepliesI want handle exceptions in update panel control with c#.
View 1 RepliesI have a link button inside an update panel. The problem is the link button on postback is updating the whole page. Tried it with a normal button and the page is not refreshed all. Here's the code.
<asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent">
I have many controls like dropdown, radiobuttonlist, etc on my page and I put all these controls inside the update panel so that the page doesn't look to be posting back when something is selected. Now the working on the page is very smooth. But the session object isn't getting refreshed even if I postback to the server and as a result even if the users are working on the page they are being sent to the login screen after 20 mins.
Is there anyway where I could put all the controls in update panel and still refresh the session after any postback(dropdown selection)
how to catch update panel's request start (before partial updation request is sent to server) and response receive (before update panel is updated) events.
View 1 RepliesI am building a system for a school project. I currently have several Update Panels on the page that have many different controls on them. I also have a single Label control that i use to display messages to the user. I would like to have this label within an update panel also but there are literally hundreds of triggers that would require it to be updated and i dont want to type an absurd number of triggers for this one control.Is there a way for me to have this one panel update regardless of what happens?
View 2 Repliesi am confused about the fact that if partial update of dropdowns is possible through Update Panel ,then why we should use asp.net ajax Cascading drop down extender ,that has made same task bit complex by making callback to web services ? what is difference between using update panel and cascading drop down extender ?
View 2 RepliesI have a GridView control inside one Update Panel and a detail section inside another Update Panel. Initially, the detail section is hidden and when a GridView row is selected, the Detail panel becomes visible. Everything works fine except that if the GridView contains more rows and covers most of the user's screen, screen doesn't shits to the start of Detail section.I can use anchor but was just wondering if there is any other way of achieving this. Also the Detail section has multiple nested Update Panels and if I use anchor, then any of the child Update Panel's update will move the screen to the beginning of the detail Section.
View 4 RepliesI am using tabs and I want some user input on each one.hen I click submit I return the partial view. However it is only the partial view that gets rendered.What I am trying to do is keep the overall view and render the partial view. In fact what I am trying to do is known as hijaxing, but I am not familiar enough with Ajax that I know how to do it.So this is my view;
<%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Employee.Master" Inherits="System.Web.Mvc.ViewPage<SHP.WebUI.Models.HolidayRequestViewModel>" %><asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> HolidayRequest</asp:Content><asp:Content
ID="Content2" ContentPlaceHolderID="EmployeeContent" runat="server"> <% using (Html.BeginForm()) {%> <%: Html.AntiForgeryToken() %> <h2>Holiday Request</h2> <p>You have <%: Html.DisplayFor(model => model.DaysAvailableThisYear) %> days left annual leave for this year and <%: Html.DisplayFor(model => model.DaysAvailableNextYear) %> days left for next year.</p> <p>If your request is approved and exceeds the number of days left, then those extra days will not be paid.</p> <%: Html.HiddenFor(x => x.EmployeeId) %><%: Html.HiddenFor(x => x.ApproverId) %> <% } %> <div id="tabs"> <ul> <li><a href="#tabs-1">Approver</a></li> <li><a href="#tabs-2">Single Date</a></li> <li><a href="#tabs-3">Date Range</a></li> </ul> <div id="tabs-1"> <% Html.RenderPartial("GetApproverTab", Model); %> </div> <div id="tabs-2"> <% Html.RenderPartial("GetSingleDateTab", Model); %> </div> <div id="tabs-3"> <% Html.RenderPartial("GetDateRangeTab", Model); %> </div> </div></asp:Content>
This is my partial view;
<%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<SHP.WebUI.Models.HolidayRequestViewModel>" %><% using (Html.BeginForm("GetSingleDateTab", "Employee", FormMethod.Post, new { id = "frmSingleDate" })) { %><p>Enter your day or part day of Annual Leave here.</p><table> <tr> <td align="right">Date:</td> <td><%: Html.EditorFor(x => x.SingleDate) %></td> </tr> <tr> <td align="right">Morning Only:</td> <td><%: Html.CheckBoxFor(x => x.MorningOnlyFlag) %></td> </tr> <tr> <td align="right">Afternoon Only:</td> <td><%: Html.CheckBoxFor(x => x.MorningOnlyFlag) %></td> </tr> <tr> <td colspan="2" align="center"><input type="submit" value="Save" /></td> </tr></table><%: Html.HiddenFor(x => x.EmployeeId) %><%: Html.HiddenFor(x => x.ApproverId) %> <% } %>
and this is my controller;
I have multiple update panels in a page. how I can know which update panel caused partial page updation on client side before page is partially updated?
View 3 RepliesWhen an asynchronous postback happened inside update panel, another postback happens also for MasterPagenot only update panel embedded page .I want to prevent this MasterPage postback . is this possible ?think like i have a MasterPage and another page which is test.aspx which is content page of MasterPagei have update panel at test.aspxwhen asynchronous postback happens at this test.aspx update panel it also loads
MasterPage Page_Loadi want to prevent this (it should not also load MasterPage Page_Load)
I am facing a critical condition wherein I have a web page and a User control within it.I need to set the value of two labels in the user control using values collected on the server side.However whatever I do on the server side or client side I do see on the webpage although I can see in the code that it is being set.So Now I am just sending the value from the server side and setting it on the client side.I am sending from server side using,
if(rowcnt > 0 && rowcnt1 > 0 && (selectedh != string.Empty))
ScriptManager.RegisterClientScriptBlock(this.updMainTable, typeof(string), "test1", "showRehabMain('"+val+"')", true);
[code]...
I have a user control with linkbuttons (used for paging) and a repeater inside an update panel. The paging works correctly, but is causing a full page postback every time I click through to the next page.
The update panel looks like this:
[code]....
So far, I have tried adding an async postback trigger for the user control, which does cause an async postback but does not update the rest of the text in the update panel. In otherwords, the async postback occurs and the next page shows up, but the original text in the repeater is there as well just below it.
I have also confirmed that I have IDS set on my linkbuttons, since that can trigger a full postback inside an update panel.
I have tried changing the update panel mode (Always, Conditional, ChildrenAsTriggers, etc.).
None of it makes a difference - the only thing that actually causes an async postback is to use the trigger, but then the rest of the content in the update panel is not updated, so I get duplicate content.
How do I conditionally trigger a full page postback from a link button inside of an update panel?
I have a custom control that contains its own updatepanel with a link button nested inside of it. When the link button is pressed I want its event handler to have the option of either letting the control update as normal or doing a full postback on the page.
Here is the control hierarchy:
Page
Custom Control
UpdatePanel
LinkButton
Event handler Pseudo code:
LinkButton Click Handler Begin
If is a partial post back AND a full postback is needed
Page.DoFullPostback
End If
End Handler
Note: I aways need the partial postback to happen. I was considering injecting a __DoPostback in the controls markup but this seems hacky to me.
I saw article [URL] .... that is working fine
I have a page with multiple textbox multiline
When I apply your code for three textbox then it show only one editor and remain same as simple textbox and if i click on button it flickering ...
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:TextBox ID="TextBox1" runat="server" TextMode="MultiLine"></asp:TextBox>
<asp:HiddenField ID="HiddenField1" runat="server" />
[Code] ....
Related to my previous question which is answered. The deal is, there is an update panel for modalpopup extender that is triggered by a button. The problem is when the form is submitted by a button, this modal popup is seen on the page! I do NOT want this modal popup extender to be seen when the form is submitted.
[Code]....
I have a page on which there is a textbox that is in update panel and has text changed event and autopostback=true. On the same page there is a 'Retrieve' button(inside repeater control) outside the updatepanel. Now what is happening is if user inputs data in the textbox and clicks retreive button page_load event is firing twice which is not what should be happening, one time its the partial postback due to the text changed event and second time is the page post back. I would like to restrict the second postback.
View 1 Repliesi am using the update panel in my application in that i had added 3 dropdownlists,all of them are having the selectedIndexchange event so, once you select any item in the dropdown list i had to some operation, but the problem is that if i change the any dropdownlist in the update panel all the dropdownlists selected index methods are getting called, but what i was expecting is that when i select any item in first dropdonwlist that corresponding selectindex has to be executed not the other ones, so anybody had experienced this kind of problem let me know?
View 3 RepliesI am having an issue with an update panel, which is still causing the entire page to postback.
I have made sure i have all the correct bits in the web.config, section groups, httphandlers, httpmodules, additonal assemly etc... but it still does not work. I have got it to work in a way,which is why i think i have the config right, because if i take the search panel of and place it outwith the update panel, the go button only postsback the rest of the page not what is inside the updatepanel.
I am using a master page, but the update panel only appears in the content page, within the content tags.
[Code]....
want to do a page refresh when a button inside an update panel is clicked. Is it possible and how?
View 7 RepliesIn one of my webpage, I have a parent window where i have a datalist with 10 rows of images. when i click any image a pop up window(child window) opens.
The child window has a form to be filled by user. Once user fills this form, he will press the save button. Once the save button is clicked, the child window should be closed and the datalist(in the update panel) in the parent window should be refreshed.
This is how I am trying to achieve this. On click of the save button a javascript function is being called of the parent window like this: window.opener.refreshDataList();
in the refreshDataList() function I have written the following code:
{
childWindow.close();
__doPostBack('ctl00_ContentPlaceHolder1_UpdatePanel1', '');
}
This works like a charm in Internet Explorer. However in Mozilla and Chrome it doesnt work. While testing this I added an alert statement ind the refreshDataList() function like this..
{
childWindow.close();
alert("Testing");
__doPostBack('ctl00_ContentPlaceHolder1_UpdatePanel1', '');
}
Once I added the alert statement, It started working in both mozilla and chrome.
So I realize that It could be an issue related to focus. I have done window.focus()
but still its not recieving any focus and not working in Mozilla and Chrome.